XENA 5Aأفقي نوع الجدول مطاحن مملة

صور ( 8 )

علامة تجارية
XENA
موديل
5A
بطاقة الهوية
461400
السنة
2017
الموقع
الولايات المتحدة الامريكية
بطاقة الهوية
461400
علامة تجارية
XENA
موديل
5A
السنة
2017
الموقع
الولايات المتحدة الامريكية

الوصف

2017 XENA 5A 5- Axis CNC Horizontal Boring Mill 130mm 3.2M

المواصفات

تحويل المواصفات للمتري
حجم عامود الدوران
5.118 "
X-Horiz TVL من الجدول
126 "
Y فير TVL من رئيس
78 "

Make: Xena
Model: 5A
Year: 2017
Includes 1 Year Warranty
Under 500 hours use
3 modes on the same 15'' touch screen:
Manual mode
Manual assisted mode TACHYON
FAGOR 8070 "CNC" mode, conversational, or/and G code
Controller: 5 simultaneous axis
Note that our TACHYON / FAGOR controller has the "TeamViewer" interface, by which it is possible to check and diagnose machine, remotely via the internet.
Avoiding costly, and often unnecessary technician traveling when it comes only to parameters and/or programming.

SPECIFICATIONS

Table: 72" x 63"
Max weight table 17,000 lbs
Travels:
X-axis 126"
Y-axis 78.7
Z-axis 78.7
W-axis 35.4
Height of table: 56"
Spindle:
Diameter 130mm (5.1)
Nose: BT-50 or CAT-50
Speed (RPM) 10 -2000
Spindle motor: (26HP @ 30 min)
Speed ratio 3 (gearbox)
FEED
Fast feed (X-Y-Z) 10M / min (472’’./min)
Fast feed (W): 6M / min (400’’/min)
Cutting feed: 5M / min (200’’/min)
Table '' B '': 4 RPM
ATC
Number of tools: 60 tools (BT or CAT-50) '' ARM TYPE '' (currently on BT)
Max tool weight: 55 lbs
Max tool length: 15.7
Max tool diameter: 5 (10 in. Without adjacent tools)
Change time: 15 sec.
Machine weight: 118,000 lbs
Floor space: 295 x 301 '' (See attached drawing)
Height: 213.5 ''
Voltage: 440V 60Hz 3ph

EQUIPPED WITH
Axis "B" @ 360,000 position (+/- 10 μ) with possibility of machining in 4 simultaneous axes on the table.
Spindle cooler
Automatic power off
Hydraulic unit
Coolant system
Automatic lubrication
Alarm light tower
LED full interior lighting
M.P.G. 5 axis
Linear positioning glass scale on the X, Y, Z axes
Heat exchanger
Chip conveyors
PROBE Renishaw (RTS + RMP60 (Q) + RMI-Q) Automatic tool length & workpiece probing system
5th axis installed on table with base
(Central connection from the top of enclosure for full pivoting)
Possibility of (5 axis simultaneously).
Rotary table with a 3-jaw hydraulic chuck (20 '') with a 6 '' bore
HD rolling center with a 3-jaw hydraulic chuck (16 '')
Hydraulic brakes on both ends
CTS "Coolant" High pressure through spindle) (15bar = 215 psi)
Full enclosure (required with CTS)
W 400mm extension support (for vibration-free power machining up to the center of the table)
Permanent adapter for: (combined with tool changer)
2 heads at 90 degrees: (1) mini 50/30 + (1) STD 50/50 (see photos below)
1 straight extension 50/50 (see photos below)
PROBING SOFTWARE OPTIONS
The following software packages can be used to program probing routines for workpiece set-up and inspection on CNC machining centers.
GoProbe:
Entry-level package for simple workpiece set-up and tool setting routines.
Inspection Plus:
An integrated suite of inspection cycles including vector measurement.
Productivity+™ Active Editor Pro:
A PC based software package with GUI, allowing users to select features directly from an imported CAD model.

عن البائع

معلومات وجهة نظر الشركة