BESSER SUPERPAC V6 منع صنع الآلات
معلومات القوائم
بطاقة الهوية
465835
رقم المخزن
15614
علامة تجارية
BESSER SUPERPAC
موديل
V6
النوع
منع صنع الآلات
حالة
مستعملة - جيد
الموقع
الولايات المتحدة الامريكية
الوصف
Besser Superpac V6 52"X 18.5" 9 Cycles/Min Block Making Machine Rebuilt 2005!
Make: Besser Superpac
Model: V6
Serial: 113
Pallet Size: 52" X 18.5"
New: 1990
Fully Rebuilt In 2005
9 Cycles/Min
This machine can make 6, 8” blocks per cycle or 8, 6” blocks per cycle.
The machine is rated between 7 and 9 cycles per minute. Our historical shows closer to 7 cycles per minute. Close to 20,000 8” units per shift.
Weight: 70,000 lbs.
Measurements: 15ftx11ftx12ft high.
Rear Pallet Feed
Machine Taken Out Of Service In Excellent Full Operational Condition
Stored under cover outside
Please Note Pricing Does Not Include Steel Pallets,Mixing,Compressors,Batching Or Handling Equipment.
For full price offer, it will include 4,6- & 8-inches CMU block molds with a repair kit for the 8-inch mold
Machine Located In Puerto Rico Answers to questions from other interested parties:
How much plates this machine needs for 8 hours
production
The machine needs from 3000 to 4000 plates
depending on the size and type of unit produced. For 8” CMU 3000 plates per 8
hour shift.
Each Rack holds 108 plates this varies according
to the size of the Rack Handling equipment and transporter on the plant.
This is a machine rated by Besser at 8-9
cycles/min Our experience with the machine was closer to 8 cycles/min
Does the machine comes with controller ? No
How much and what type molds come with this machine ?
4,6 & 8-inches CMU block molds with a
repair kit for the 8-inch mold.
You will get:
1 (One) Besser Superpac V6-12 113 with the main
Cam motor and belts and the (2) Vibrators with motors.
And 4,6 & 8-inches CMU block molds with a
repair kit for the 8-inch mold.
The following are not including with the machine.
No hoopers, mixing system, transport system,
batching plant, electrical panels, Controls or electrical PLC controllers
parts. No Spare parts either electrical or mechanical
Are included. Please refer to the attached
photos. What is shown in the photos is exactly what you will receive except
for the above listed molds.They will also include around 8
racks and 800 used steel pallets as a bonus.The most expensive solution is to contact Besser Machine
company and ask for a quotation for a control panel. Please note that this is a mechanical machine with only 4
electrical motors so in a simple way it will consist basically of an electrical
box that will contain4 electrical starters and switches to turn on and off the
machine. This can be assembled by a knowledgeable electrician.Now for the not so simple answer: Any block plant of any
kind needs to be integrated with the batching plant, transport equipment, etc.For this, on these modern times we use PLC or Programmable
Logic Controllers to do multiple functions and basically control the flow of
productthrough the plant. These PLC and all related equipment will
turn on and off the machine as needed. It will receive input from many plants
sensors, etc.Please send video link to prospect so he can have an idea of
the equipment involved.This video was taken from You Tube. It is not our plant. In
the video he will be able to see a similar but smaller Besser Machine in
action.
https://www.youtube.com/watch?v=tBwTtJPbykQ
المواصفات
Weight: 70000 Height: 144 Length: 180 Width: 132