راقب

CNC & N / C التحكمGSK GSK988T

California, الولايات المتحدة الامريكية

نظرة عامة

علامة تجارية
موديل
بطاقة الهوية
469972
حالة
الجديد في المخزن
السنة
2019
الكمية المتاحة
10
الموقع
California
الولايات المتحدة الامريكية
عودة السياسة
عام واحد
الوصف
At this time we are offering CNC controls for mills and latches complete digital systems with absolute encoders as well as analog systems. The controls we have available can perform multiple axis operations. We would like to offer several options to upgrade your existing CNC machines. We offer CNC components sold with motors, drives, and cables that you can replace existing components on an existing machine or pre-wired electrical enclosures that replace exiting control boxes. GSK has been doing retrofits on existing machines for many years and as a result, has developed the PLC information to make a very smooth transition from older electronics to a whole new generation of CNC systems. We have the earlier 980MCD-H Machining Centers and the 980TDc-H Turning Control are both analog systems and the control will work with your existing motors and drives. The new digital systems require that the motors and drives work with the newer CNC controls. We are working with a network on machine tool integrators that can provide local support for retrofits. We can also assist with the mechanical components, motor mounts, spindle rebuilds, and motion control repair ball screw and linear rails. We also can send a technician out to dial in the tool changer and tune the system after the installation of the new components. We have developed CNC systems with PLC engineering in place for the following machines. Cincinnati Arrow 500, 750, 1000, Fadal 3016, 4020, 6030, 8030, Deckle FP3A, FP4A, Mori Seiki MV-Junior Series, Okuma LB-12 and LB-15 and Ikegai FX20N and FX25N. Use the Dropbox link to see additional accessories, photos, and documents for these controls. Call to discuss your specific requirements.
المواصفات
الوزن
20 lbs

ورقة المواصفات

GSK is the second-largest producer of CNC kits anually producing approximately 500 CNC systems per week. On over 25 billion dollars worth of machine tools produced in China annually over 65% has GSK CNC components. This is not a PC based system, but a hardened CNC with the software burnt into the EPROMs of the hardware providing maximum reliability. The modular design of the products allows quick replacement of major components if and or when required. GSK provides complete CNC systems which include all required motors, drives, cables, and controls. The NEW 988TD CNC control is a dual-channel turning center CNC control developed by GSK Equipment Co., LTD. And is based on ARM+DSP dual-core hardware architecture by connecting with the industrial Ethernet bus with the (GSK-Link), the servo drives and a remote I/O unit. The 988TD can control up o 10 axis and 4 spindles, each path includes 6 feed axis (including C Axis) in each path, a 3-axis link, and 3 spindles to realize the turning with compound milling operations. The servos motors use high-resolution absolute encoders that provide 0.1µm position precision, and 1ms interpolation period to perform a turning-milling compound machining and can provide the control performance for multi-axis turning and machining centers.
عن البائع
الثمن

رؤية المزيد من العقارات المعروضة من هذا النوع

thumb

HAAS SCO1M

CNC & N / C التحكم

تستخدم - ممتاز | Illinois, الولايات المتحدة الامريكية
thumb

HAAS SCO1M

CNC & N / C التحكم

مستعملة - جيد | Illinois, الولايات المتحدة الامريكية
$1,700.00 USD
thumb

HAAS SCO1M

CNC & N / C التحكم

مستعملة - جيد | الولايات المتحدة الامريكية
thumb

SIEMENS

CNC & N / C التحكم

مستعملة - جيد | Connecticut, الولايات المتحدة الامريكية
$9,995.00 USD
عرض جميع

رؤية المزيد من العقارات المعروضة لهذه العلامة التجارية

thumb

GSK RB08

روبوت

الجديد في المخزن | 2019 | California, الولايات المتحدة الامريكية
$24,995.00 USD