GLEASON 512 HYPOID TESTER اختبارات تروس
معلومات القوائم
بطاقة الهوية
473672
رقم المخزن
4145
علامة تجارية
GLEASON
موديل
512 HYPOID TESTER
النوع
اختبارات تروس
حالة
غير محدد
الموقع
North Carolina
الولايات المتحدة الامريكية
الولايات المتحدة الامريكية
الوصف
Gleason Model 512 hypoid gear tester. 20" max Gear Diam 10" max Pinion Diam. 39 degree taper, hydraulic clamping, automatic cycles, many features. Inspect in NC under power.
المواصفات
Gleason Hypoid Bevel Gear Tester Model# 512 Automatic tester S/N 702808 Machine was purchased from an Off-Highway customer whom had shut down their plant. Machine is in very good running condition and can be inspected under power in our shop. GLEASON 512 MACHINE SPECIFICATIONS CAPACITY Gear outside diameter (maximum).......................................508mm Pinion outside diameter (maximum).....................................254mm Offset of pinion spindle L or R of gear spindle center (max)........101.6mm PINION SPINDLE Diameter of taper hole at large end.................................3-29/32" Taper per foot........................................................39/64" Depth of taper............................................................3" Diameter of hole at small end.........................................3.740" Depth of hole at small end from face of spindle........................15.5" GEAR SPINDLE Standard Large Bore Diameter of taper hole at large end....................2-19/64".....3-29/32" Taper per foot.............................................1/2".......39/64" Depth of taper...............................................3"...........3" Depth of hole at small end...............................2.168".......3.740" Depth of hole at small end from face of spindle..............8"...........7” Machine Is Equipped with the following Safety Guarding when operating control pendant hydraulic clamping forward and reverse cycles hydraulic unit Electrical panel attached with operator pendant control This machine can be inspected under power with proper notice please contact us today to see this machine and other gear machines in our NC facility.