3 Dynamic heads, All on the machine/Working.
Burny LCD-10 Plus Controller,
2- 1100 lb. Abrasive Hoppers
All High Pressure Tubing for pump up to 10' from gantry Abrasive Feed Tubing,
Acrylic Side Guards
Heavy Duty Grates/ in the tank pallet with a few replacement grates,
60 kpsi Pump Tool Kit (for 75 HP and larger) A few extra spare parts
AccuStream pump AS-60150; 60000 psi, 150 HP, 480V
Additional Z-Axis with 60 kpsi Cutting Head/COMES WITH BUT NOT ON THE MACHINE
Max. heads for XL Controller = 3
Double HP Whips to 60 kpsi Cutting Head, each75 HP and larger 60 kpsi pumps only
WARDCAM, software Import DXF files and create CNC files; program bevel cuts for 5-axis
CAD/CAM Basic,1 seat
IGEMS Nesting Package,1 seat
Remote Pump ON/OFF, Turn pump on and off from the controller, switch between high and low pressure
Pump Voltage Change (208-230)New A-6030 or AS-6050 only
Additional Options Tie in low level sensor to controller; stop machine and give warning at controller
Field in WARDCAM for operator to enter value for dimensions at top and bottom of part for automatic taper angle calculation
Option to run one pump at a time
Footprint 29.6' x 20.8'
One Carriage X-Y Cutting Area 20' x 13.1'
Two Carriage X-Y Cutting Area 20' x 14.1'
Software WARDCAM, IGEMS
Power Requirements (Gantry Only) 230V, 30 amps, 3 Phase
Air Requirements 80 psi, 2 cfm
Max Number of Z-Carriages 6
Bulk Feed Hopper 1100 lb pressurized
Drive Mechanism Y-axis beam is ball screw driven. X-axis are helical rack and split pinion driven.
Linear Positional Accuracy ± 0.010 " per axis
Repeatability ± 0.005" per axis
Speed 0.01 in/min - 500 in/min based on 230 volts