المطاحن الموضوعREISHAUER US
المانيانظرة عامة
علامة تجارية
موديل
بطاقة الهوية
491928
النوع
حالة
مستعملة - جيد
السنة
1982
رقم المسلسل
53690 - 2
الموقع
المانيا
رقم المخزن
721898
تحويل المواصفات للمتري
قطر عجلة التجليخ | 13.78" |
عرض عجلة التجليخ | 1.5748" |
مجهزة
* Here we have a Universal Thread and Worm Grinding Machine suitable for following grinding
processes: longitudinal Thread Grinding with single and multiribbed profiled grinding discs
as also Plunge-in Grinding Cycle for short threads and with multi-ribbed grinding wheels.
* Following Original REISHAUER dressing devices are available:
USL 6100 Motor-driven diamond roll profiling device mounted above the grinding wheel,
* USL 3100 3 faces Dressing device for the straight profiling of single ribbed disks,
USL 700 manual actuated dressing device for single ribbed grinding wheel (flanks a peak)
USL 3200 not motorized steel roll dressing device for multi-ribbed grinding wheels
* Automatic plunge-cut device. Automatic lift-off of grinding slide for return of workpiece slide.
* Relief grinding device with cams, also suitable for plunge-in cuts.
* Hydraulic tailstock with foot switch and expansion compensation.
* Various automatic grinding processes available by selection switch on switch cabinet i.e.
manual operation with manual dressing / 2 way grinding with Infeed cycles and dressing cycles
which can be presetted via a counter and with automatic compensation.
* Amount of each dressing infeed can be also presetted by counter up to 9 times x 0,015 mm
* Lift-off safety hood over the working area with oilmist exhaust, light, etc.
* Full set of change gears, 6 grinding flanges, grinding disks, and many more.
This machine is ideal for grinding Worms, Ballscrew spindles and threaded spindles!
ورقة المواصفات
Grinding length 450 mm
Max. workpiece clamping length 870 mm
Workpiece Ø / thread Ø, min./max. 10 250 mm
Max. weight of workpiece approx 150 kg
Workspindle bore 45 mm
Lead range for single-rib wheels 0.3 100 mm
Lead range for multi-rib wheels 0.6 6 mm
Max. profile 10 module
Max. lead angle +/- 40 °
Grinding wheel dimensions, Ø x width 350 x 20/40 mm
Relief grinding size 0.01 8 mm
Presettable number of flutes 2 10, 12, 14 and 16
27 workpiece speeds 0.4 160 rpm
Grinding wheel speeds 1,700 2,500 rpm
Spindle drive, approx. 7,5 kW
Total electric load 15 kW - 400 V - 50 Hz
Weight approx. 5.600 kg
رؤية المزيد من العقارات المعروضة من هذا النموذج
REISHAUER US
المطاحن الموضوع