Specifications: WORKPIECE CAPACITY: Automotive Version (Jobbing Version) Y Extreme Ratio: 4:1 (10:1) Y Cone Distance: Max (30 Deg. Spiral Angle & 12" Dia. Cutter: 7.40 (9.00") Full Depth, Maximum: 1.00" Face Width, Maximum: 2.30" (2.750") Range of Tooth Numbers: 5 to 150 Inclusive Maximum Gear Pitch Dia. of: (18.00") Typical 30 Deg. Spiral Ang.: 14.00" Gear Using 12" Dia. Cutter: 14.00" (16.00") At The Following Ratios: 10.50" (12.75") Diametral Pitch (Coarsest): 2.00" MACHINE SPECIFICATIONS: Machine Center to Nose Of Spindle: 2.50" to 13.50" Root Angle: -12 Deg. to 66 Deg. (-12 Deg. to 90 Deg.) Sliding Base: Withdraw 2",Advance 3" Vertical Offset: 4.50" Up and Down Cutter Spindle Rotation Angle (Tilt): 0 Deg. to 180 Deg. Swivel Angle: 0 Deg. to 355 Deg. Eccentric Angle: 0 Deg. to 160 Deg. Cradle Angle: Deg. to 180 Deg. AXIS SPEEDS - MAXIMUM: Y Cutter Spindle: 115 RPM WORKSPINDLE DIMENSIONS: Diameter of Tapered Hole at Large End: 3 29/32" Taper Per Foot: 39/64" Depth of Taper: 6" Diameter of Hole Through Spindle: 3 1/16" Diameter of Spindle Nose: 5 1/2" Length x Width x Height: 126" x 102" x 84" (Width can be adjusted to 90") Weight: 24,000 lbs