GLEASON 116 مولدات والعتاد شطبة

المواصفات

مجهزة

ورقة المواصفات

Specifications:

WORKPIECE CAPACITY:
Automotive Version (Jobbing Version)
Y Extreme Ratio:  4:1 (10:1)
Y Cone Distance: Max (30 Deg. Spiral Angle & 12" Dia. Cutter:  7.40 (9.00")
Full Depth, Maximum:  1.00"
Face Width, Maximum:  2.30" (2.750")
Range of Tooth Numbers:  5 to 150 Inclusive
Maximum Gear Pitch Dia. of: (18.00")
Typical 30 Deg. Spiral Ang.:  14.00"
Gear Using 12" Dia. Cutter:  14.00" (16.00")
At The Following Ratios:  10.50" (12.75")
Diametral Pitch (Coarsest):  2.00"
MACHINE SPECIFICATIONS:
Machine Center to Nose Of Spindle:  2.50" to 13.50"
Root Angle:  -12 Deg. to 66 Deg. (-12 Deg. to 90 Deg.)
Sliding Base:  Withdraw 2",Advance 3"
Vertical Offset:  4.50" Up and Down
Cutter Spindle Rotation Angle (Tilt):  0 Deg. to 180 Deg.
Swivel Angle: 0 Deg. to 355 Deg.
Eccentric Angle:  0 Deg. to 160 Deg.
Cradle Angle:  Deg. to 180 Deg.
AXIS SPEEDS - MAXIMUM:
Y Cutter Spindle:  115 RPM
WORKSPINDLE DIMENSIONS:
Diameter of Tapered Hole at Large End:  3 29/32"
Taper Per Foot:  39/64"
Depth of Taper:  6"
Diameter of Hole Through Spindle:  3 1/16"
Diameter of Spindle Nose:  5 1/2"
Length x Width x Height:  126" x 102" x 84" (Width can be adjusted to 90")
Weight:  24,000 lbs