tool holders, tailstock available if needed, auto lube hard way machine, Pendant control, heavy pattern frame design

Diameter of Spindle: 4” diameter Spindle Taper: spindle accepts the #50 NST / G & L Quick lock ( OEM G & L common mill-taper) ( that is a #50 NST with 2 small Slots on top area/see pics) **Note: these are the standard #50 NST tool holders, with a small groove milled into top Spindle Travel: 30” Spindle Speeds: RPM 43 changes, 10 to 1300 RPM “43 Spindle Speed-changes in total” in the Standard & the High Range Low Ranges in RPM’s go from 10 to 600 RPM High-Range in RPM’s go from 650 to 1300 RPM’s Feeds Info: Feeds in Inches Per Rev. (IPR) of Spindle: / Table, Saddle & Head Feeds: “36 Feed Ranges in total” 2 Separate Ranges to cover Standard Speed Range & High-Speed Range” 18 changes in “Standard” Feed-Speeds – Ranges from .005 to .250 IPR 18 changes in “High-Speed” Range - Ranges from .002 to .116 IPR Working Table Surface: 36” x 74” Table Cross Travel: 60” to 62” Vertical Travel: 42” Saddle Travel: 50” Main motor: 20 HP Electricals: 220/440 Volt (at 440 volts now) Approx. Weight: #29,000 Lbs. Approx. Dimensions: 180” Length x 84” Widest area x 108” Height Overall Height: Note for Shipping: ( for shipping add 4” to height for Rigging thru Doorway) Overall Width, Note for Shipping: ( for shipping the Saddle/Table will remain intact )