MACHINE #13183 SPECIFICATIONS MANUFACTURER: FENN MANUFACTURING CO MODEL: 125 TYPE IMPACT CUTOFF MACHINE WITH BAR FEED -IMPACT CUTOFF MACHINE: -*CAPACITY-SOLID -ROUND: 1 1/4" (31.75 mm) -SHAPES: EQUIVALENT CROSS-SECTION TO 1 1/4" (31.75mm) DIA -MINIMUM: 3/8" (9.5mm) DIAMETER *CAPACITIES ARE BASED ON CUTTING SOLID MILD STEEL (65,000 PSI TENSILE). CAPACITY VARIES INVERSELY WITH THE TENSILE STRENGTH OF THE MATERIAL. FOR EXAMPLE IF THE TENSILE STRENGTH OF THE MATERIAL TO BE CUT IS 120,000 PSI THE CAPACITY DROPS TO APPROXIMATELY 7/8" (22.2mm) FOR ROUND STOCK & 3/4" (19.1mm) FOR SQUARE STOCK. -CUT LENGTH -MAXIMUM: 24" (609.6mm)- TO BE VERIFIED WITH POSITIVE STOP -MINIMUM: 1 1/2 X DIAMETER OF MATERIAL BEING CUT (SHORTER LENGTHS CAN BE ACHIEVED WITH A COMPROMISE IN CUT QUALITY -CUTOFF TOLERANCE: +/-.005" (.127mm) PER MANUFACTURER -VARYING WITH LENGTH, MATERIAL AND SPEED -RATE OF CUT: 180 CUTS MAXIMUM FOR SHORTEST LENGTH CUT AND MIN. DIAMETER. RATE OF CUT IS LESS FOR LONGER CUT LENGTHS AND LARGER DIAMETERS. -MAIN DRIVE MOTOR 15 HP (8.6Kw) AC -AIR PRESS REQUIRED: 60 PSI MACHINE IS EQUIPPED WITH A MICRO-ADJUST POSITIVE STOP ASSEMBLY, MACHINE MOUNTED ROLL FEED UNIT AND SEMI-AUTOMATIC LUBE SYSTEM. -POSITIVE STOP: THE POSITIVE STOP ASSEMBLY CONTROLS THE LENGTH OF CUT. IT IS INFINITELY ADJUSTABLE UP TO THE CUT LENGTH ITS MAXIMUM LENGTH. THE BAR IS FED WITH THE FEED ROLLS THRU THE CUTOFF DIES UNTIL IT MAKES CONTACT WITH THE POSITIVE STOP TARGET WHICH TRIGGERS THE CUT. THE POSITIVE STOP TARGET THEM MOVES UP AND OUT OF THE WAY OF THE CUT PIECE SO IT CAN DROP DOWN THE CHUTE. -ROLL FEED: TWO 7" (177.8mm) DIAMETER BRONZE ROLLS EACH POWERED BY ITS OWN HYDRAULIC MOTOR TO TAKE THE BARS FROM THE BAR FEED AND FEED THEM THROUGH THE DIES TO THE POSITIVE STOP TARGET TO TRIGGER THE CUT. -HYDRAULIC POWER UNIT: THE ROLL FEED MOTORS ARE POWERED BY A JAMTEK ENTERPRISES VARIABLE SPEED HYDRAULIC POWER UNIT DRIVEN BY A 5 HP 1735 RPM MOTOR MOUNTED IN THE BASE OF THE MACHINE. THE SPEED IS ADJUSTED BY THE OPERATOR UTILIZING A ROTATING KNOB LOCATED NEXT TO FEED ROLLS. -BAR FEED: -CAPACITY -BAR DIA: 1 1/4" (31.75mm) DIAMETER -BAR LENGTH: 20'-0" (6.1m) APPROXIMATELY -FEED TYPE: HYDRAULICALLY DRIVEN CHAIN- BAR DROPS ONTO CHAIN AND RIDES TO THE FEED ROLLS ON THE IMPACT CUTOFF -HYDRAULIC POWER UNIT: 1 HP 1440 RPM GE MOTOR DRIVING A RACINE PUMP WITH TANK. tHIS IS A SEPARATE STAND ALONE UNIT. LINE HEIGHT: APPROX 40" (1016mm) FROM FLOOR -EQUIPPED WITH ADJUSTMENTS FOR LEVELING BAR FEED IS DESIGNED WITH LEVEL STORAGE ON TOP AND AN INCLINE RAMP TO FEED BARS TO MOVING CHAIN. THE CHAIN MOVES THE BAR FORWARD TO MAKE CONTACT WITH THE FEED ROLLS ON THE IMPACT CUTOFF MACHINE. -FLOOR SPACE (APPROX) -IMPACT CUTOFF: 8'-0" LONG X 8'-0" WIDE X 5'-0" HIGH (2.4m LONG X 2.4m WIDE X 1.5m HIGH) -BAR FEED: APPROX 20'-0" LONG X 5'-8" WIDE X 6'-0" HIGH (6.1m LONG X 1.7m WIDE X 1.8m HIGH) -WEIGHT (APPROX) -IMPACT CUTOFF: 7,800 LBS (3545Kg) -BAR FEED: 2,000 LBS (909Kg) **PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE** **ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**