SERIAL ............................................ 750-00097 MODEL ............................................ TF110-EX CAPACITY ....................................... 110 TON (METRIC) AREA OF BED ................................. 43" X 27" AREA OF RAM ................................ 23" ...

SERIAL .................. 1245652 NEW ..................... 1983 MODEL ................... M-1245 CAPACITY ................ .187" (3/16) MILD STEEL LENGTH OF CUT ........... 48.8" BLADE LENGTH ............ 52.7" SPEED ................... 75 SPM MANUAL BACK GAUGE ....... 39.37" REAR OPERATE...

SERIAL .......................... 25950059 MODEL ........................... HA250W CAPACITY RECTANGLES ............. 10" X 12" CAPACITY ROUNDS ................. 10" BLADES SPEEDS.................... 88 TO 295 FPM BLADE WIDTH & LENGTH ............ 1-1/4" X 138" INDEX LENGTH ...................

138 Ton x 10’ CNC Hydraulic Press Brake with AMNC-PC Control, Y1,Y2 Horizontal Finger Movement, L1,L2 Backgauge Z Vert Finger Position, D1, D2 Ram Depth & Tilt.

40” x 50” (40” x 100” with Reposition) 33 Ton Turret Punching System with Amadan 04 PC Controller, 58 Station with 2 Auto Index Stations, (2) Holders with Ball Transfer Table

General Punching Tonnage: 22 Punching Capacity: 1/4" Frame Type: Captured Bridge Drive Type: AC Servo Punch/Form/Scribe Drive Type: AC Servo Maximum Punch Stroke: 1.65" Maximum Travel W/O Reposition: 50" X 98.4" (50" X 196.8" with 1 reposition) Maximum Feed Rate: X-Axis 3,150 IPM, Y-Axis 2...

Amada Turret Punch Press, AE 2510NT

242 Ton X 14’ 8-Axis CNC Hydraulic Press Brake with Amada Operateur CNC Controller, 6 Axis Independent Back Gage (X1, X2, R1, R2, Z1, Z2), Full Graphical Programming and Safety Guarding

50” X 144” Capacity CNC Turret Punching System with Amada 04PC Controller, Auto Repositioning,  ASR48CR Punching Cell 6-Shelf System and Ball Transfer Table.

1993 Amada Apelio 357 1.5KW (Punch / Laser Combo), 1.5KW,33 Tons, 58 Station / 2AI, Fanuc 05PLA, New:1993

Amada Apelio / Pega 357

33 Ton Amada 357V Apelio Punch/Laser,1.5 KW Fanuc Laser, 50" x 72", 58 Sta, (2) AI 1993 #27120

22 TON AMADA APELIO III 2510V, 2000 WATT HYDRAULIC TURRET/LASER COMBINATION MACHINE W/ FANUC 16O iL CNC CONTROL,KOOLANT KOOLER CHILLER, DUST COLLECTOR, NEW:2001 - TOTAL HOURS 24,000 Motion Package Travel Method X and Y axes work piece movement Control Method X, Y, Z, T, B, & C Simul...

1997 Amada Apelio – III 357V AP3357V 30-Ton CNC Laser Turret Punch Press

Amada 357V Apelio III, 33 Ton, 50" x 72", Fanuc 16-L, 58 Sta., (2) A.I., 1500 Watt Laser, 6 Shelf Tower, 1997, #30210

33 TON AMADA APELIO III 357V HYDRAULIC TURRET PUNCH/LASER COMBINATION MACHINE W/FANUC 16-L CNC CONTROL & 1500 WATT FANUC LASER MFG:1997 - APPROX:48,500 HRS. - NEW TURBO BLOWER INSTALLED APRIL 2017 System Specifications Motion Package:Apelio III 357V - 50" x 72" Table Punching System: 33 ...

This AMADA ARCADE 210 Punching Machine was manufactured in 1995 in France. It has been operative for approximately 15000 working hours since then. It is operated through a FANUC 16P control unit. This machine includes a punching force of 200 kN. This Amada, has mainly worked with steel up to 6 mm...

20 Ton X 24" with 03P CNC Control, 10 Station Turret, RS232 Port.

This Amada Turret Punch is in very clean & excellent condition. The machine is being sold On-LIne thru Bidspotter on Dec.11th 2019

Come with 30 punches like new

Used Amada Turret Punch Press Model Aries 245

22 Tons 40" Throat Amada ARIES 245 CNC TURRET PUNCH PRESS

AMADA, ASTRO 100 FBD-1253MH, 138Ton, NEW: 2000 | JC

Amada 8 Axis CNC Controls, Astro 100 Automated Robot System, Programming Software, Transformer.

AMADA ASTRO II 100NT BENDING CELL, MODEL:HDS-1030NTR TOOL CHANGER, MISC. TOOLING & SOFTWARE MFG:2008

AMADA CM 400 CIRCULAR COLD SAW NEW 2005

Mist Buster System, CNC Control, Anti-Backlash Device, Cut Piece Counter, Ammeter For Main Motor Amp Draw, Self Diagnostics, Chip Conveyor, Sorting Chute To Separate Trim & Remnants Form Good Cut Pieces, Automatic Trim Cut, Carbide Stabilizer Pads, 20' Incline Table

Used AMADA FULLY AUTOMATIC CARBIDE CIRCULAR SAW , Model CM75, 2.95”, Stock No. 10597, Year 2005

50 Ton X 50” CNC Turret Punching System with GE Fanuc 6M CNC Controller, 44 Position Thick Style Turret with 2 Auto-Index Stations, Ball Transfer Table Auto Repositioning and Hydraulic Clutch.

60” X 72” ⅜” Thick Capacity 55 Ton CNC Turret Punching System with GE Fanuc 6M Control, 44 Position Thick Style Turret, (2) Auto-Index Stations, Auto Repositioning, Slug Conveyor, Hydraulic Clutch and Ball Transfer Table.

One Used Amada Turret Punch Press Coma 557

Rebuilt Mechanically New upper Turret, New Drive System.

Amada Coma 567 CNC Turret Punch/ Plasma Combo, 1994- 55 Ton, 60" x 144" With Repo, Amadan 04P-C, 200 Amp

50 Ton Amada Coma 567 CNC Turret Punch

One Used Amada Turret Punch Press Coma 567

Amada Coma 567

1/4" x 8.6" Amada #CSH-220, hydraulic, adj. stops, foot switch

*** WE TAKE TRADE INS | 1/4" x 8" x 8" Amada CSHW-220, notcher coper & radius machine, Coping Attachment, Digital readout system (with encoders), Electric Foot Switch, Start/Stop Push Buttons, Single/Continuous Selector Switch, Blade Clearance Adjustment, Solid State Timer, Side Gauge Attachemnt,...

NOTCHER MAKE AMADA MODEL CSW-250 CUTTING CAPACITY 1/4" STEEL SIZE 10" X 10" X 1/4" EQUIPPED WITH 3 HP MOTOR EQUIPPED WITH PORTABLE FLOOR PEDALE VERY LITTLE USE ON THIS MACHINE EXCELLENT CONDITION PURCHASED NEW IN 2000

9.84" x 9.84" x .125" Amada #CSW-250, coping attachment, LED digital display, #28095.

Amada - Hydraulic Power Notcher | 10 Ga. x 9.84"

AMADA CTB400 CNC CARBIDE BLADE VERTICAL BAND SAW W/ CONVEYORAMADA CTB400 CNC CARBIDE BLADE VERTICAL BAND SAW W/ CONVEYOR

AMADA CTB400 CNC CARBIDE BLADE VERTICAL BAND SAW W/ CONVEYORAMADA CTB400 CNC CARBIDE BLADE VERTICAL BAND SAW W/ CONVEYOR

AMADA CTB400 CNC CARBIDE BLADE VERTICAL BAND SAW W/ CONVEYORAMADA CTB400 CNC CARBIDE BLADE VERTICAL BAND SAW W/ CONVEYOR