CITIZEN A16 VI Swiss Type CNC Lathe (used) New 2011 - only 3,500 cut hours! w/LNS Alpha ST320 magazine bar loader, live tools, sub spindle, ran oil, tool kit, manuals.

Citizen Cincom A20, .79" Dia, 8,000 RPM, 3.15" Max Part Length, C-Axis, FS32i-A CNC, #29767

3/4", Citizen A20VI, Fanuc 32iA, 2008, 6-Axis, Edge C-320,C-Axis

Can be seen under power in our PA warehouse!

CITIZEN A(2)20 VII (2F7PL) Swiss Type CNC Lathe (used) New 4/2012 - UPGRADE TO 25mm / 1" BAR CAPACITY - MACHINE AND LOADER!!! w/Edge C320 Magazine bar loader (12'), LIVE BACK WORKING, chip conveyor, parts conveyor, 8 line 2000 PSI High pressure coolant system, Mist Collector, FIRE SUPPRESSION Sys...

Citizen A20 VII (3F7) Swiss Type CNC Lathe (used) New 2017 w/FMB Turbo 3-26 magazine bar loader, 25mm increased bar feed capacity option, Chip Conveyor, High Pressure Coolant, Mist Collector, ran oil, UNDER 1000 HOURS!!!!

Citizen A20 VII (2F7) Swiss Type CNC Lathe (used) New 11/2010 put in service 2011 - Equipped with - C320 Magazine Bar loader, Mist collector, Part Conveyor, High Pressure coolant system, Chip Conveyor, Manuals.

Citizen Cincom Model A20VII CNC Swiss Type Screw Machine, Fanuc 32i Model A CNC Control, Main & Sub-spindles, 20 mm Max. Machining Diameter, 5-Axis + C-axis on Main Spindle, 5 Turning Tool Positions, 4 Rotary Tool Positions, 4 Stationary Tools for Main Spindle + 8 for Sub-spindle, Hi-pressure Coo...

Very well equip machine. Rear power tools are a great option! Photo's are from the customers floor. Machine is now at Peerless!! Come in and kick the tires!

CITIZEN A32 VII (1M7PL) Swiss Type CNC Lathe (used) New 2010 w/C332 magazine bar loader, (6) NSK High Frequency Live Spindles, Live Back Working Attachment w/ speeder spindles, high pressure coolant, mist collector, parts conveyor, chip conveyor, ran oil, low hours. Motorized rotary guide bushing.

CITIZEN #ASC-206 ROTARY CROSS DRILLING SPINDLE FOR F20/F25

CITIZEN ASE-110 Rotary Face/End Drill SPINDLE FOR F20/F25

CITIZEN ASE-206, END/FACE DRILL FOR BACKWORKING FOR F20/25

CITIZEN ASE-110 Rotary Face/End Drill SPINDLE FOR F20/F25

CITIZEN, ASM-206, ROTARY CROSS MILLING SPINDLE FOR F20/F25

CITIZEN, ASM-806, ROTARY CROSS MILLING SPINDLE, "AS-IS" ADJUSTABLE F20/25

CITIZEN, ATF-516L, FIXED BIT HOLDER FOR F20/F25/G32

CITIZEN, ATF-713L, FIXED BIT HOLDER FOR F20/F25/G32

CITIZEN, ATP-101, F20/25 SETTING BLOCK W/TOOL SETTING JIG, MOUNTS TO TP-1000

CITIZEN, AUS-106L, Die Sleeve, 1" Dia. x 80mm L for 1/4" (3/4")

CITIZEN, AUS-110L, Die Sleeve, 1" Dia. x 80mm L for 5/16" (1")

CITIZEN, AUS-112L, Die Sleeve, 1" Dia. x 80mm L for 25/64" (1 1/2")

This is a one owner machine, B12 Type I, equipped with FMB Mini Turbo bar loader - Collets, guide bushings and loader collets included......Also end working attachments.

NEW 1998 B12 V TYPE 5 ... GOOD CONDITION. ALSO M20 AVAILABLE NICK R&K MACHINERY

Citizen B12 VI (1F6) Swiss CNC Lathe (used) New 1999 w/Iemca CH112 Magazine bar loader (12'), sub spindle, 2 live tools, ran oil.

CITIZEN B12 VI (2F6) Swiss Type CNC Lathe (used) New 2004 w/Ikura Seiki magazine bar loader (12'), sub spindle, live tools, ran oil, good condition.

Citizen C16 VII Swiss Type CNC Lathe (used), New 2001 Equipped with CAV16C-IS Magazine Bar Loader, live tools, sub spindle, Manuals and tool kit, ran oil.

This Citizen C16 VII Lathe was built in 2004 in Japan and has been working for approximately 71000 hours. Equipped with a Mitsubishi Meldas Control unit, this machine incorporates 2 spindles and can operate with a spindle speed up to 10000 rpm.

CITIZEN C16 VII (1M7) Swiss Type CNC Lathe (used) New 2003 w/CAV16C-IS Magazine bar loader, tooling, live tools, sub spindle, C axis, ran oil.

- Diameter bar capacity : 32 mm - Max machining length : 320 mm - Spindle power : 7,5 kW - Spindle speed : 8 000 rpm - Combined + counter-combined : 5 positions each - Indexing on sub spindle : 1 ° - Maximum diameter in sub spindle : 32 mm - 5 Rotating tool holders on the main spindle - 4...

CITIZEN CAV20L-IS Magazine Bar Loaders (used) New 2006 - Used on Citizen L(7)20 VIII (7M8) machine. Standard bar kit and small bar adapter kit for 7mm barstock, manuals, good condition.

CITIZEN #CIT-BTW-2000-A220, THREAD WHIRLING, 2013, 12 pos ring, 25 deg adj

1" Dia. Citizen E-25J CNC SWISS TYPE LATHE, Live Tool, Subspindle, FMB Barloader

CITIZEN E32-III (2M3) Swiss Type Twin Turret Lathe (used) New 1995 w/Iemca Boss 542 Magazine Bar loader w/misc guide channel and pusher sets, Live and static turret tooling, High Pressure Coolant System, ran oil, manuals.

CITIZEN E32-IV Swiss Type Twin Turret Lathe (used) with Y AXIS TURRET, New 1995, w/Iemca Boss 542 Magazine Bar loader w/misc guide channel and pusher sets, Live and static turret tooling, High Pressure Coolant System, ran oil, manuals.

CITIZEN, F10-U11Z, FIXED GUIDE BUSHING FOR D-10

CITIZEN, F10-U11Z, FIXED GUIDE BUSHING FOR D-10

CITIZEN, F12S-U10Z, FIXED GUIDE BUSHING, FOR F12-SERIES (ORIG)

CITIZEN, F16S-U10Z, FIXED GUIDE BUSHING FOR F16

CITIZEN, GTF-1210L, VERTICAL TOOL HOLDER,6 POS,3/8" TLS,FOR L16 TYPE II,III,V&V

CITIZEN Guide Bushing with Housing for M20

16mm (0.625") Swiss Turning Center with 15,000 RPM Main, 10,000 Back Spindle and 6,000 RPM Rotary Tools. Includes Fanuc CNC Control, 4 Live Milling Spindles, Rotary Guide Bushing, Cool Blaster HP Coolant and Mist Collector.

CITIZEN K16E VII Swiss Type CNC Lathe (used) New 2011 w/Cutoff tool breakage detector, Workpiece conveyor, 3-color patrol light, Work light, Chip Conveyor, 10-Line HP Cool with Mist, CAV 16KE Magazinr bar loader w/ (2) Additional guide channel sets, Network Installed, Auto-Dialer, Ran oil. A...

Citizen K16 VII Swiss Type CNC Lathe (used) New 2005 (2) available w/LNS Express 220 magazine bar loaders, ran oil.

CITIZEN K16 VII (1F7PL) Swiss Type CNC Lathe (used) New 2010 w/Citizen/Edge C320 magazine bar loader, mist collector, High pressure coolant system, Fire Trace, ran oil, medical parts.

Very nice K16 and CAV loader. On our floor! Ready to go. Fanuc control

CITIZEN, KDFZ-201, (2)POS DBL END FIXED,1/2 INDEX,FOR E25J/E32/M(2)20/M32

Citizen M32/E32 Turret tool holder - KSA-407 right angle live tool.