GLEASON 102
GLEASON Hypoid gear generator Model: No. 102 5 SETS IN STOCK
GLEASON 104
(1) Set-Up of Change Gears For Speed, Feed and Roll, Index and Ratio Roll, Hydraulic Double-Acting Chucking Mechanism (Less Draw-in-Bar and Nut), Self-Contained Hydraulic System, Self-Contained Coo...
GLEASON 104
GLEASON 106
GLEASON 106
GLEASON 106
Technical details X Axis ±720° Z axis 280 mm Rapid speed X Axis 6480 degrees/min Rapid speed Z Axis 10000 mm/min Rapid speed Y Axis 136800 degrees/min Feed speed X Axis from 0 to 6480...
GLEASON 106
Gleason Model 106 Hypoid Gear Generator, Max. Cone Distance 4.25", Rebuilt 1985.
GLEASON 108
Quality machine in excellent condition previously used in Scandinavia New 1967 Complete rebuild by Curdworth in July 2000 with revised electrics and retrofitted Danfoss VLT5000 frequency converter...
GLEASON 114
Hydraulic Chucking, Change Gears, Guards, Coolant
GLEASON 116
Excellent Running Condition, 18"" Maximum Pitch Diameter, 10:1 Extreme Ratio, 9"" Maximum Cone Distance, 5-175 Teeth, Equipped With Modified Roll, Coolant system, Hydraulic System, Chip Conveyor, S...
GLEASON 116
gleason 116 hypoid generator two machines are available.
GLEASON 116
Immediately Available, 18" Maximum Gear Pitch Diameter, 2.3" Maximum Face, Equipped with Fanuc 18T Control, Enclosed Guarding, Hydraulic Clamping, 6 Axis Digital Read Out, Coolant System, Stock Div...
GLEASON 118
GLEASON 118
GLEASON 22
GLEASON 24A
Coniflex, Modified Roll, Rough/Finish Cam, Stock Divider, Hydraulic Chucking Cylinder, Blade Holders, Setting Gauges, Change Gears
GLEASON 24A
Hyd. Chucking Cylinder, Cutter Setting Gauges, Cutter Blocks, Stock Divider, Coniflex, Rough/Finish Cams, Extra Blades, Change Gears
GLEASON 24R
MODEL 24R GLEASON STRAIGHT BEVEL GEAR ROUGHER Setting Gauges, Hydraulic Cylinder for Power Chucking, Change Gears, Two Cutter Blocks With Finishing Cutters, Auto Lube, Coolant System
GLEASON 24R
Gleason Model 24R Straight Bevel Gear Rougher (2)
GLEASON 26
Gleason Model 26 Quench Press, , S/N 32355, machine is for press quenching straight and spiral bevel gears while utilizing the proper dies to maintain form during the heat treat quenching process.
GLEASON 26
8" WORK HEAD BORE, STOCK DIVIDER, HYDRAULIC CHUCKING, CHANGE GEARS, CUTTER BOLT, GAUGES, COOLANT PUMP
GLEASON 437 G60S
Gleason 437 (G60S) 60" Spiral Bevel Gear Planing Generator
GLEASON 450HC
• Machine furnished with machine mounted, air-conditioned, electrical enclosure, operator’s controls located at front of machine, adjacent to powered access door. • FANUC Model 150MB computer co...
GLEASON 450HC
Face Hobbing and Face Milling Compatible, 450mm Maximum Diameter, Equipped with Workhead Change Gears, Fanuc 150MB Control, Chip Evacuation System, Hydraulic Work Clamping, Chip Auger, Hydraulic Sy...
GLEASON 601
GLEASON 606
Gleason Model 606 Spiral Bevel gear cutting machine, utilizing the generating method, (4) available, inspect under power.
GLEASON 609
GLEASON NO. 609 GEAR FINISHER Stock Divider, Hydraulic Work Clamping, Chip Conveyor, Index Plate, Change Gears, Hydraulic System, Coolant System,
GLEASON 609
IMMEDIATE AVAILABILITY, Inspect Under Power! Max. Gear Pitch Diameter 20", Face Width 3", Min. Outside Cone Distance 2.75", Max. Cone Distance 10". Equipped with: Stock Divider, Hydraulic Work Cla...
GLEASON 610
immediate availability, inspect on power. 20" max. pitch diameter, 1.250" whole depth, 3" face width, 60-80 deg. root angle. equipped with: hydraulic work holding, pendant control, chip conveyor,...
GLEASON 641 G-PLETE
The best job shop spiral bevel model Gleason made-will do the complete range with just 3 different cutter heads so you can respond quickly with a minimum of tooling. This is the last of a highly re...