STANKO 1M63
Stan Canada Industrial Machine Tools and Service All new and used machines are internally and externally checked by our machinist to make sure that we properly deliver the quality of the equipment...
TOOLMEX TUR 630A
The lathe is in fully functional working condition
AMERICAN 2516 STYLE E
This is a great lathe to have in your shop. Watch the video to see how good this lathe runs.
DAEWOO-IKEGAI DA25
This lathe runs really well and can be seen under power.
EUROPEAN LION 25-CU 25 X 157
European built, heavy duty 25" swing engine lathe with 4" spindle bore.
EUROPEAN LION 25-CU, 25 X 60
European built, heavy duty 25" swing engine lathe with 4" spindle bore.
EUROPEAN LION 25-CU, 25 X 80
European built, heavy duty 25" swing engine lathe with 4" spindle bore.
EUROPEAN LION 25-CU, 25" X 120"
European built, heavy duty 25" swing engine lathe with 4" spindle bore.
KINGSTON HL-2500
Description 25” x 96” Used Kingston Geared Head Lathe Model HL2500 Specifications: Swing Over Bed Ways 25″ Swing Over Cross-Slide 16” Distance Between Center 96” Spindle Hole 3-1/8″ Spindle Motor 1...
LEBLOND 25X144
LeBlond lathe, model 25X144, with 16" 4 jaw chuck and Sony 3 axis digital read out, s/n 11F 446 [LOC: Pulp Mill Maintenance Shop]
LEBLOND NH
25" Swing 216" Centers LeBlond NH ENGINE LATHE, Rapids,Taper,4-Jaw,(2) Steadies,20 HP
LEBLOND SERVO SHIFT
LeBlond 25" x 32' CC Servo-Shift 2516 Heavy-Duty Engine Lathe, 21" 4-Jaw Chuck, 2" Thru Hole, 26" Swing Over Ways, 16" Swing Over Cross Slide, 10 to 1300 RPM, Inch Threading, Taper, 1-Steady rest, ...
NARDINI IN25200T
22460 Nardini IN25200T 25” x 120” Gap Bed Engine Lathe Model: IN25200T sn:C6-JKL-537 mfg. Swing: 25" Center Distance: 200" Chuck Size: 15" 3-Jaw Spindle Bore: 4" Spindle Speeds: to 1,250 RPM De...
NARDINI ND-325
Nardini 25" x 92" Gap Bed Engine Lathe S/N: G4-BKBBR72, Mfg: 2021, Stock No: 87343 Model: ND-325 Swing Over Bed: 25" Swing in Gap: 32" Swing Over Cross Slide: 18" Distance Between Centers: 92" Spin...
TOOLMEX TUR 630
This lathe is super clean and comes equipped with a chip conveyor and Siemens 810D. It has very low hours, has been well-maintained. To the best of our knowledge, all details listed below are dee...
TOOLMEX TUR 630M/80
25" X 78" TOOLMEX TUR630/MN-78 CNC Teach Lathe
WROCLAW TUR-630A
1994 Wroclaw TUR-630A X 80" Engine Lathe, 12" Manual 3-jaw Chuck, 5.5" Bore, Tailstock, DRO, 900 lb Jib And Hoist Included
ACRA 26120 ACH
ACRA Engine Lathe Model ACH 2660 26" x 120" Capacity Made in same factory as Kingston lathes Features: Meehanite cast iron, vibration stresses relieved Induction hardened (HS70 degree) and precisio...
ACRA 2660 ACH
ACRA Engine Lathe Model ACH 2660 26" x 60" Capacity Made in same factory as Kingston lathes Features: Meehanite cast iron, vibration stresses relieved Induction hardened (HS70 degree) and precision...
ACRA 2690 ACH
ACRA 2690 ACH PRECISION ENGINE LATHE 26" Swing x 90 Centers 7,200 lbs Introducing the new ACRA 2690 ACH Precision Engine Lathe with a 26" swing and 90 centers. This hefty item weighing 7,200 lbs ex...
AMERICAN 26" X 96" ENGINE LATHE
26" Swing, 18" Over Cross Slide, Steady Rest, Heavy Duty Tailstock
CINCINNATI 26" X 50" ENGINE LATHE
3-Jaw Univ. Chuck, Tool Post
CUTMASTER BIG-JOE
GANESH GTW-2680
GANESH (Expand Machinery) Precision Lathe Model GT-2680, 26" swing 80" cc 15-HP Spindle Motor Spindle Speeds from 15 – 1200 RPM 12-Spindle Speed Gear-Ranges for High-Torque D1-11 Camlock Sp...
KINGSTON HD-2690
Swing: 26" Distance: 90" Chuck: 20" 4 Jaw Chuck Swing Over Cross Slide: 17.5" Swing Gap: 35.1" Bed Width: 15 3/4" DRO: 2 Axis Newall DP700 Spindle Bore: 4-1/16" Spindle Taper: MT7, MT5 Spindle Moun...
LEBLOND REGAL
LeBlond Regal 26" x 132" Gap Bed Engine Lathe
NARDINI ND-325
MAIN MACHINE SPECIFICATIONS Machine Model ND 325x2200 Capacities METRIC SAE Max turning over the bed 650 mm 25,6 inch Max turning cross slide 475 mm 18,7 inch Max. turning over the carriage 475 ...
PINACHO ML 18 325 X 2000
PINACHO/METOSA Engine Lathe Model ML18 325 x 2000 26" Swing x 80" CC, with FAGOR 20iT DRO 2 axis DESCRIPTION New range of manual lathes with variable speed head. The new range of ML lathes, equipp...
SHARP 2660B
SHARP 2660B 4.5" SPINDLE BORE Precision Engine Lathe FEATURES: • D1-11 Camlock • 4.5” Spindle Bore • Direct Selection For Inch/Metric Threads • One Piece Cast Meehanite Bed • Quick Change Gearbox •...
SHARP 2680B
"New SHARP Model 2680B Precision Lathe with 4.5" Spindle Bore available at Blackout Equipment, LLC. This 2022 engine lathe boasts a 26" swing, 80" centers, and a powerful 15 hp motor. With a spindl...
SHARP 2680B
This our reliability, durability, simplicity heavy duty precision Lathe. The 4.5” spindle bore is perfect for larger work pieces. The spindle made of hardened and ground alloy steel with a triple...
SMTCL CA6266C
Contact Us (780) 465-3667 sales@stancanada.com www.stancanada.com
LODGE & SHIPLEY RXE2516
Used LODGE & SHIPLEY RXE-2516 Precision Lathe (Used) Swing over carriage 26-1/2(673)、Swing over cross slide 20(508)、Center distance 120"(3048)、Pulley speed 845、spindle hole 65mm、4jaw chuck 550φ、mai...
LAGUN TURNMASTER HR-680X 1100G
Lagun American Turnmaster HR-680X 1100G Engine Lathe with DRO, Tailstock
AXELSON A20
27" X 226" Used Axelson Hollow Spindle Engine Lathe
ROMI SUPERMASTER
27"x160"cc ROMI Engine Lathe
STANKO 1M635
27.5"X 120" Stanko Heavy Duty Engine Lathe Model 1M635
STANKO 1M635
27.5"X 120" Stanko Heavy Duty Engine Lathe Model 1M635
TIMEMASTER SUPER M
27"x120"cc TIMEMASTER Engine Lathe
STANKO 1M635
27.5"X 120" Stanko Heavy Duty Engine Lathe Model 1M635
HERCULES AJAX SPM710X4000
Hercules Model SPM710 Engine Lathe; New in (1997); Serial #1997486; Swing over Bed: 28"; Swing Over Cross Slide 17.71"; Center Distance: 157"; Working Diameter In Gap 37.9 "; Work Piece Length in G...
LANSING 28"-9 1/4"
Lightly used excellent condition inspect in service Delivery available
LANSING G-28 HOLLOW SPINDLE LATHE
28" x 180", Big Bore, Front and Rear Chuck, 9 ¼” hole in the work head 24” 4-Jaw chuck on front side; 19” 3-Jaw chuck on back side (2) retrofitted heavy duty steady rests Heavy duty tail stock with...
LEBLOND 2516HD
28"x192"cc LEBLOND Engine Lathe