SPECIFICATIONS: Stroke:18", Bore Size - Maximum:1.5", Part Size - OD Maximum: 5.0", Distance between Spindles: 5.166", Spindles: 6, Index Stations: 8, Index Table Diameter: 20", Column to Table Center: 13-1/2", Spindle Motor: 7-1/2 HP, Spindle Speeds: Variable to 1200 RPM, Feed Rate: 0 - 200...

- Curso Útil Usinável...........................................................6000 M/M - Diâmetro Máximo Admissível.....................................................600 M/M - Potência do Motor do Porta Ferramentas............................................5 HP - Potência do Motor/Bomba H...

Spindle 65 in distance to column 15 in Table 17 "X 37-3 / 4" 10 hp motor

Bores between 63 to 177mm (2.5 - 7ins) diameter, can Hone Cylinders up to 3.25 mtrs long, has powerfull 7KW motors for both rotation & Honing, overall length of machine is 10.75 mtrs, the last picture shows the machine when first delivered to present owners 10 yrs ago , later pictures s...

Dynetics HL20, 5" Media Cyl. Dia., 500 PSI, Media Temp. Ctrlr., AB PLC, 1996

Extrude Hone Model 77B 4" / 100mm bore Its not seen much use as you can see from the pictures Note. Chiller attached to the power unit does not come with the machine. It works without this Machine is in good working order and can be tested under power I can load to transport

Electro chemical deburring system) Electro Chemical deburing (ECD) is a method of removing burrs and sharp edges from metal components by electrolysis. The ability to prevent any removal in one are while aggressively attacking another makes the ECD process usefull when applied to today's ...

Profile 200, Extrude Hone, 8" Media Cyl, 4" Hyd Ram Dia, 2000 PSI, 10 HP, 1996

Nagel ECO 40 Twin Spindle CNC Bore Hone, 1.57" Bore Cap, 7.87" Stroke, 39.37" Part Height, Gauging, AB Controls, New 2012, #29032

Used NISSIN VERTICAL TYPE HONING MAHCINE Model: CMH-100-N-3H

Used NISSIN VERTICAL TYPE HONING MACHINE Model: MH-100-K-S

Used NISSIN Vertical Honing Machine CMH-100-N-S

SCHOU DENMARK CYLINDER HONNING MACHINE MODEL ……………………………….260 MAXIMUM BORE CAPACITY……..300MM(12 INCHES) MAXIMUM LENGTH OF BORE……600MM(24 INCHES) LOT OF EXTRA EQUIPMENT LIKE CONTACTORS,SWITCHES,OVERLOAD COILS,TRANSFORMERS,PRINT CARDS,OILSEALS ETC .

Used SUN CHEN Horizontal Honing Machine FT-3B

Sunnen Pin Hone

Sunnen #CK-21 Vertical Hone, .75”-8” Diameter, 12” Stroke Length, Programmable Control, Well Tooled, New 2007. Like New Condition!

EC-3500D,Sunnen,.060"-6.5"Cap.Auto Size Ctrl, ACS Probe,Auto Stone Wear Comp,'95

Photograph SUNNEN ECLIPSE EC-3500-D HORIZONTAL HONE/HONING MACHINE General Specifications Diameter range (ID): Manual stroking .060-6.500" Power stroking .060-4.000" Automatic sizing .125-2.000" Stroke length .236-6.700" Spindle speeds 200-3000 (adjustable in fine increments) Str...

.060" - 6.5" ID range, 1/8" x 16" length, 200-1600 RPM, 1/2 HP, 230/440, S/N 42213

SUNNEN HONE MBB1600 IN VERY NICE CONDITION-ADDITIONAL PICTURES UPON REQUEST-USED IN ELECTRONICS COMPANY -NOT MUCH USE-4.75 X 16INCH LONG

MANUAL BASIC HONE, PFN FILTRATION UNIT

6.5" Dia 16" Stroke Sunnen MBB-1650DMS HONE, Sunnen KKN-100 Square Honing Fixture

Sunnen MBB1660

6.5" Dia 16" Stroke Sunnen MBB-1660 HONE, SINGLE PHASE/115-230 VOLTS, MANUAL STROKING

6.5" Dia 16" Stroke Sunnen MBB-1660 HONE, LARGE TOOLING PACKAGE

Loaded with Accessories, & Cabinet, Excellent Condition, Can be seen under power in our PA warehouse!

6.5" Dia 16" Stroke Sunnen MBC-1801-D HONE, POWER STROKING, AUTO CYCLE,

No. MBC-1803 Sunnen Hone, 1986.

Sunnen Model MBC-1803 Horizontal Hone (1990) Power Stroking, Stones, Mandrels Specifications and Equipment Mandrel Dia. (min): 0.06" Mandrel Dia. (max): 6.5 " Stroke (max): 16" Internal work diameter range with power stroke: .060" to 3-3/4" Length range: open or blind holes can...

Machine is in good working order. Can be inspected under power.

Honing Diameter: .030" - 3.75" Power Stroke / .060" - 6.5" Manual Max Stroke: 0-16" Max Hone Length: 0-10" Honing Speeds: 20-2,500 RPM Stroke Speeds: 80-110-160-220-310 SPM Oil Tank Capacity: 25 Gallon Main Motor: 1 HP Equipped with: Automatic Power Stroke, Auto-Sizing, Honing Fluid Syst...

ML-3500D, Sunnen,.060" - 6.5"Cap.,Auto-Sizing,StoneWare Comp,Feed Regulator,'07

Sunnen Model SV-1015-3-200 3-Spindle Column Type Vertical Honing System, Windows based PC touchscreen, 10-position servo driven rotary index table, in porcess gauging, 2010

Sunnen SV3 Series Vertical Honing Machine