Plasma Table : Advanced Cutting Systems Model-Duct cutter 510 Application :HVAC Cutting area: 5x10 Unit features onboard machine controller Age: Approximately 1999 Table has been tested and moves under power Needs: Table needs replacement cutting torch and a copy of any HVAC machi...

Cutting Area: 5’ x 20’; Positioning Accuracy: +/- .012”; Traverse Speed (Max): 1,000 IPM; Ventilation: Down Draft Table; Sheet / Part Support: “Wavy” Slats”; Capacity: Full Sheet of 1/4” Plate - Cutting Capacity is determined by the Plasma unit; Machine Design: Unitized, Single Piece, All Welded...

6’ X 10’ CNC Plasma Cutting System with Hypertherm Edgepro Control (Hypertherm Phoenix Software), Hypertherm hpr260xd Extreme Definition Torch System (with Auto Gas Console), Unitized Water Table Version (Automatic Water Level Control), AKS Wireless Remote, Industrial Laser Pointer & Joy Stick, R...

This Baykal BPL-H 1506 Plasma Cutting Machine was built in the year 2014 in Turkey and has been working for only 40 hours since then. Equipped with a Tecnos PC 12 Control unit, this machine stands out for its large cutting area of 550 x 6100 mm. It presents perfectly good conditions, as it is al...

Baykal BPL-H 4014 CNC Plasma Cutting System with 5-Axis Bevel Head and Programmable Tube Cutting Station, Hyperthem HyDefinition HPRXD400 Plasma Supply Unit , and 6 Position Drill / Tap Spindle Manufacturer: Baykal Model#: BPL-H 4014 Age: 2013 Specs: CNC Control: Technos SCE Sri Modena (1)...

Very high quality and very high capacity CNC plasma system. These systems use high amperage plasma cutters. Control is Linux based for fast response. A very high capacity machine (We build up to 8x40) 1-855-433-3689 (MADE IN THE USA)

High quality, made in the USA CNC plasma tables. These machines feature Hypertherm CAD/CAM (Pronest LT with nesting module)

Kaliburn ProLine 2200 High Density Plasma System.

C & G Systems Challenger Plasma / Oxy Cutting System

Machine is under power and still in operation. Available immediately. Subject to prior sale.

4’ x 8’ Plasma Cutting System with Hypertherm HPR 130 XD Power Source, Tru-Hole Technology, Auto Gas Console, Integrated Zoned Downdraft Table,  and less than 200 hours of use!

2016 C&G Systems Aviator DXD 4' x 8' Plasma Cutting System - 4’ x 8’ Plasma Cutting System with Hypertherm HPR 130 XD Power Source, Tru-Hole Technology, Auto Gas Console, Integrated Zoned Downdraft Table, and less than 200 hours of use!

This CRM CT16025ISO40HPR Plasma Cutting Machine was manufactured in 2007 in Italy and has a working record of approximately 25000 production hours. The machine stands out due to its large Y-axis movement range of 16100 mm and the maximum sheet thickness.

Hypertherm Edge Pro CNC Controls, Hypertherm HPR260XD High Definition Power Supply, Dual Side Drive, Auto Lubrication, High Power Drives, Water Table. Approx 111 Hours Total Power On - 28 Hours Cutting Time

Cybermation Plasma Cutting System

Durma High Definition Plasma system with Siemens 840 control and drive system. Hypertherm HPR 260XD power source. Please note picture shown if of new machine and with dust collection system, which is not included in the quoted price. Approximate new replacement cost of $ 150,000.

8' x 80' Esab Avenger, (1) Plamas Unit, 400 Amp, (4) Oxey Torches, Vision CNC, 2002, #27419

Machine is under power and ready for demonstration. Available immediately, subject to prior sale.

115” X 240” Travels Dual 200AMP Plasma Cutting system with Burny Phantom Controller, Dual Hypertherm HT2000 200AMP Plasma Power Sources, Brushless DC Servo Drives on Hardened and Ground Rack & Pinion Drive System All Completely Refurbished with New Controls, Drives, Gearboxes & Lifters in 2012.

ESAB GXB-800 Plasma Cutting System

115" X 240" ESAB GXB-800 Plasma Cutting System - Fresh Retro

10’ X 40’ CNC Hi Definition Precision Plasma Cutting System with Vision PC Controller, EPP-200 200 AMP Power Source with PT-600 Torch, and PT-24 100AMP Precision Plasma & Part Marking Power Source, Oxy-Fuel Torch, Omni-Directional Crash Protection & Height Control on Both Plasma Stations, Motoriz...

14’ X 43’ CNC Plasma Cutting System with Esab Vision PC CNC Controller, Esab ESP 400C 400 Amp Plasma Power Source, Esab PCM Plasma Marking station and ESAB Edge Prep Manual Oxy Beveling StationGENERAL SPECIFICATIONS

14' X 43' ESAB Sabre 3600 Plasma / Oxy CNC Plasma Cutting System

8' X 12' ESAB Shadow 2 Precision Plasma Cutting System

9' X 12' ESAB Shadow 2 Precision Plasma Cutting System

5’ X 10’ Hi-Def Plasma Cutting System with Hypertherm CNC Controller, Hypertherm HPR-130 Plasma Power Source with Tru-Hole Technology HacoCAM CAD/CAM System and Complete Electronic Upgrade in 2017

5’ x 10’ Travels CNC Hi-Definition Plasma Cutting System with Hypertherm Micro Edge ProCNC Controller, Hypertherm XPR170 High Performance with True-Hole Technology Plasma Power Source, Exhaust Downdraft Table, HacoSoft Plasma Offline CAD/CAM Programming Software and Remote Jog Control.

We have 2 used Hornet Plasma Tables Model HHD78-EDR200 for sale in Phoenix, Arizona. Each has a dust collection system. Each in good condition. Feel free to contact us for visual inspection under power. 602-258-7330. Used equipment is offered in "as is, where is" condition with no warranties...

200 TON X 16’ Hydraulic Press Brake with Manual Ram Height Adjustment, Electric Footswitch and Dual Palm Buttons for Operation, Sectional Ram Clamps and Horn Extensions on Both Ends.

SOURCE ONLY: 100 Amp Hypertherm HD3070 100 Amp HyDefinition Plasma Power Source

HYPERTHERM HT-400 PLASMA POWER SOURCE

HYPERTHERM HT-400 PLASMA POWER SOURCE SN 0335

Hypertherm HT400 Plasma Power Source

Innerlogic Proline 220 High Density Plasma Cutting & Marking System

This is a CNC cutting table for Plasma cutting Machine. Cutting size is 4'x8', 3 axis of CNC control. Machine uses ball screw and linear guides. Motion drive by servo motors for high precision.

We purchased it new in 2014 and it has never been used. It has been stored in our insulated shop, out of all weather. Brand new this would run $30,995 before tax & freight today. Included with the sale of the table is 70 gallons of plasma quench 44 that cost $1,000 back in 2014 and neither of ...

8’ X 20’ Precision Plasma System with Hypertherm EDGE CNC Controller, Hypertherm HPR260XD 260 AMP Plasma Power Source, Bowlin 5’ X 20’ Ducted, Downdraft Self Cleaning Table and Dust Collector

10' X 24' Koike Model BHP CNC Oxygen Cutting System

2008 Koike Mastergraph Cutting Machine with 100 Amp Plasma and 1 Oxy-Fuel station, 8' x 14' Capacity Model: Mastergraph II Millennium model 2500 Dual 56 inch drive trucks, "Y" axis, with integral side-guide bearings for accuracy AC Digital Servo Drive Package, 4 to 700 IPM Dual Side Rack and ...

Koike Mastergraph Millennium Plasma Cutting System

Koike Mastergraph II1500 Plasma Cutting System

Koike Aronson Mastergraph II Millennium 1500, 108" x 168" Tbl., Kaliburn 275 Amp Plasma, 1-Oxy, 2013, #30094