DAVI MCB 3053
(4) Roll, 120" x 2" Capacity, 1.5" Capacity Prebend, 90 HP
FACCIN 4HEL
Rolling width: 3000mm Rolling thickness 3x toproll Ø:60mm Rolling thickness 5x toproll Ø:70mm Rolling thickness prebending: 55mm Top Roll Ø: 660mm Bottom Roll Ø:...
FACCIN HCU3001
-Plate rolling machine one-pass full rolling with rubber coated roll 2-roll pinch pre-bend system -Plate sheet width max. 3000 mm -Plate thickness max 2 mm depending on the material hard...
HAEUSLER VRM HY
MACH-id 5563 MAKE Haeusler TYPE VRM-HY YOP 1990 / 2000 SPECIFICATIONS Rolling width 3000 mm Rolling thickness 3x toproll Ø 120 mm Rolling thickne...
HAEUSLER VRM-HY
Rolling width: 3000mm Rolling thickness 3x toproll Ø:130mm Rolling thickness 5x toproll Ø:140mm Rolling thickness prebending: 120mm Top Roll Ø: 950mm Bottom Roll...
HAEUSLER VRM-HY
HAEUSLER 4 roller 3000 x 110 mm - Make : HAEUSLER SWISS - Typ : VRM HY - Serial No : WO 1667 - Age : 1991 / 94 - Bending length : 3.000 - Ø 1500 Bending thickness : 110 mm - Ø 1500 pre bending : ...
AKYAPAK AHS 30/10
AKYAPAK 4-Roll Plate Roll Machine Model AHS 30/10, 10' x 1/2" Capacity One of the longest-established producers in Bursa, Akyapak celebrates its 58th foundation anniversary. Akyapak proudly export...
AKYAPAK AHS 30/16
The AHS features a 4 roll design that is arranged in such a way so that the 4 rollers work in tandem to ensure the plate is rolled evenly and without distortion. This innovative design provides an ...
AKYAPAK AHS 30/16
Akyapak AHS 30/16 CNC Plate Roll CAPACITY ¾” X 10’ , CNC, Hardened rolls, oil cooler, variable speed, prepared for top/side supports Akyapak has 54th years of experience and engineering expertise i...
AKYAPAK AHS 30/20
The AHS features a 4 roll design that is arranged in such a way so that the 4 rollers work in tandem to ensure the plate is rolled evenly and without distortion. This innovative design provides an ...
AKYAPAK ASM-S
10’ X 11 GA Plate Roll with Separate Moving Control Panel, Induction Hardened Rolls, Motorized Back Roll, Central Rollers Powered by Electric Motor & Gear Box.
BAILEIGH MH-314C
2014 Baileigh MH314C Four Roll Plate Roll, 480V, 1/2" x 10' Cap(LOCATION: ROME, TX)
BENDMAK BENDMAK
1-⅛” X 10’ Four - Roll Plate Roll with AK 400 CNC Control System, Cone Rolling Device, Induction Hardened Rolls, Two Rolling Speeds and Oil Cooler.
BENDMAK CY4R-HHS
5/8" X 10' 4 Roll Plate Roll with CNC Graphical & Networkable Controller, Cone Bending Device, Induction Hardened Rolls, Digital Display for Both Side Rollers, Machine Body is Steel (st-52) Constru...
BENDMAK CY4R-HHS
1/2" x 8' CNC Plate Roll with AK400 CNC Controls, Variable Speed, Induction Hardened Roll, Cone Bending Device and Prepared for Side and Top Support
BERTSCH 25-10
10' x 1/4" BERTSCH MODEL #25-10 HYDRAULIC PLATE BENDING ROLL
BERTSCH M-10240
3 Roll Plate Roll
BERTSCH M-10240
Bertsch M-10240 3 Roll Plate Roll, 10' x 1/2"
BIKO 3HCD 3028
Contact us for pricing, more information, or if you would like to see the machine at our Cambridge warehouse. +1 (877) 337-7424 sales@ferricmachinery.com Sold as is in good working condition.
CO.MA.L KAPPA3 PLATE BENDING ROLL
3/4" x 10' capacity, 15" dia Roll, Hyd Drop End
DAVI MCB 130
DAVI MCB 130 CNC Plate Bending Roll, 2022
DAVMAR D10100
Davmar Model D10100 Initial Pinch Hydraulic Plate Rolls. 3000mm x 40mm bending capacity. Rolling speed 0 - 20 ft/min 480mm diameter rolls, 50HP main motor. End Mounted Section Roll with Various Dies
FACCIN B3-3158
2.36” X 120” Hydraulic 3-Roll Plate Roll with Hydraulic Drop End, Independently Powered Hydraulic Rolls, Variable Rolling Speeds, Hydraulic Roll Adjustment, Induction Hardened Rolls, Cone Rolling P...
FACCIN BIKO B3 3158
2-1/3" x 10', Faccin-Biko 3158, 3-Roll, 22.8" Upper Roll, Hyd Drop End & Roll Adj, 75 HP, 2014
FACCIN BIKO B3 3158
10' x 2.36" Faccin Biko B3-3158, 3-Roll Dbl. Pinch, 22.83" Top Roll Dia, 75 HP, 2014, #29111
IMCAR SIHR 12/5
10' x 1/2" Double Pinch Hydraulic Plate Roll
MG SRL M3008
With side and top supports and CNC control
MG SRL M3008
FULL FEATURES
MG SRL M3022
FULL FEATURES
MG SRL MG 3015
MGSRL 3165
MGSRL 3200
MONTGOMERY 12025-H
0.25" Cap 120" Width Montgomery 12025-H BENDING ROLL
REVOLUTION MACHINE TOOLS R-GENIUS
● CNC Unit (Optional) ● Cone bending ● Polished rolls ● Oil Cooler (Optional) ● Side support system (both sides) (Optional) ● Vertical hydraulic overhead support system 4 TON x 4 m (Optional) ● NC ...
ROLSHEAR 2-H
ROUNDO PS-255
0.5" Cap 120" Width Roundo PS-255 BENDING ROLL
ROUNDO PS310
5/8″ x 10′ Roundo PS-310 Plate Roll, 1993
ROUNDO PS310
Contact us for pricing, more information, or if you would like to see the machine at our Cambridge warehouse. +1 (877) 337-7424 sales@ferricmachinery.com Sold as is in good working condition.
U.S. INDUSTRIAL USR1025
US Industrial 1/4" x 10', 3-Roll Initial Pinch, Hardened Rolls, Cone Rolling, 2018, #31963
WDM 400-7-10
1/8" x 10' Four Roll Plate Roll