The machine of feed axes for the X, Y, Z coordinate control, spindle servo motor driving, the tool magazine capacity is 24 or 30T (opt.) for both drum and arm type. It can be achieved processing for a variety of a complex parts such as plate, plate, shell, cam, the mould. The machine can achieved...

"Static Rigidity The machine features high rigidity with Finite Element Method (FEM) analysis. Static rigidity is increased by 30% compared to other machines. Dynamic Rigidity With improved frequency response and vibration-damping characteristics, the intrinsic frequency is increased by 35...

"Static Rigidity The machine features high rigidity with Finite Element Method (FEM) analysis. Static rigidity is increased by 30% compared to other machines. Dynamic Rigidity With improved frequency response and vibration-damping characteristics, the intrinsic frequency is increased by 35...

"ACCUT POWER Get power and productivity in a gearhead VMC! ACCUT Machine tools delivers HEAVY CUTTING SOLUTIONS for your shop. Great value for heavy cutting manufacturers! Taking big cuts? These super heavy-duty machines ensure rigidity for powerful cutting Powerful spindles with 2-...

The machine of feed axes for the X, Y, Z coordinate control, spindle servo motor driving, the tool magazine capacity is 24 or 30T (opt.) for both drum and arm type. It can be achieved processing for a variety of a complex parts such as plate, plate, shell, cam, the mould. The machine can achieved...

TWIN SPINDLE VMC With unique design, the vertical machining center (VMC) is developed with 2 sets of spindle and 2 sets of ATC units. Multiple-process including rough and finish machining can be accomplished with just one-setup, or multiple number of workpieces can be loaded for high efficient ma...

"TWIN SPINDLE VMC With unique design, the vertical machining center (VMC) is developed with 2 sets of spindle and 2 sets of ATC units. Multiple-process including rough and finish machining can be accomplished with just one-setup, or multiple number of workpieces can be loaded for high efficient...

Acer EMC-2240A Machining Center with ATC Featuring FAGOR Control (#11635)

Acer VMC-2040L with ATC Featuring ANILAM Control (#11649)

Acer EMC-2550 with ATC Featuring FAGOR Control (#11670)

Acer EMC-3060 with ATC Featuring FAGOR Control (#11672)

Acer EMC-35100 with ATC Featuring FAGOR Control (#11676)

Acer EMC-3580 with ATC Featuring FAGOR Control (#11674)

Acer EMC-3580 93"X 30" Table 13.3Hp 8K Spindle Vert Machining Center W/Fagor 8055i /FL-MC Cntrl (#16093)

Acer VMC-2035 43"X 20" Table 10K Rpm Vert Machining Center W/Fanuc 0i-MF Control (#18096)

Acer VMC-2243 47"X 23" Table 10K Rpm Vert Machining Center W/Fanuc 0i-MF Control (#18097)

This Akira Seiki PC 460 Vertical Machining Center was made in Taiwan in 2011 and has been operative for 7117 hours, from which 3315 are spindle hours. Equipped with a Mitsubishi M70 Control unit, this machine can work with a spindle speed up to 15000 rpm.

2002 Akira Seiki JR - Parts Machine - Video

BT40 Mitsubishi Control, LOW HOURS, UNDER POWER & RUNNING

- 4th axis - Table dimensions : 910 x 380 mm - Weight allowed on the table : 600Kg - Spindle power : 15 kW - Spindle speed : 11 000 rpm - Travel axis : X = 762 - Y = 410 - Z = 460 mm - Spindle taper : BT 40 - Tools changer : 20 tools - Dimensions of the machine : 3200 x 2500 x 2800 mm -...

Akira Seiki Vertical Machining Center, 40x20x20, cat 40 , 1998

2013 Akira Seiki V5.5 XP CNC Vertical Machining Center. Machine is in very good condition and can be inspected under power as needed. Options include: Akira Seiki CNC control, 28 station side mount automatic toolchanger, remote jog handle, and RS232 port. Please contact: Bob Nelson at 847-92...

This Akira Seiki RMV 700 APC Vertical Machining Center was built in 2012 in Taiwan. Operated with a Mitsubishi M70V Control unit, this machine can perform with a spindle speed up to 12000 rpm. It stands out for incorporating twin pallets and an internal workspace splash. Two 4th axis are included...

This machine Just came in will not be available for 2-3 weeks... we are all busy right now and want to check machine out well before releasing to customer or dealer... thank you

All specifications are approximations, and are subject to verification. “50 Taper Gear Head Spindle, 30 tool side mount tool changer On our Floor now, fully powered / tested & is in Great working condition.”

EQUIPPED WITH FANUC O-MD CONTROL, 7500 RPM, RIGID TAPPING, CHIP AUGER, THRU SPINDLE COOLANT, 65 TOOL HOLDERS, CAT-40, 48X20 TABLE

64” x 32” x 32” Travels CNC Vertical Machining Center with Fanuc OM-C Control, Full Contouring 4-Axis Rotary Table with Center, 24 ATC, Cat 40, 7500 RPM Spindle, 25 HP, ZF Gearbox, Box Ways, Spindle Chiller. Refurbed in 2014.

Year of production: 2002 Country of origin: Spain Working travel: X: 1 300 mm Y: 560 mm Z: 560 mm Table: 1 420 x 600 mm Spindle rpm range: 8 000 rpm./min Tool magazine: 24 pcs. Tool holder: BT 40 Control: CNC HEIDENHAIN Overall power demand: 25 kW

This ANAYAK ANAKMATIC-7 Vertical Machining Center was built in the year 1998 in Spain. It is equipped through a FANUC SERIES O-M control unit. This machine can work with a spindle speed up to 6000 rpm. It is in good condition.

Vertical Machining Centre (3 axis) ARGO TAIWAN MODEL: A-5 YOM: 2001 SKU # 0785 Brief Specifications/ Details Travels: 560 x 410 x 410mm Table Size: 550 x 420mm ATC: 20H Tools Spindle Speed: 8000RPM Spindle Taper: BT: 40 Controller: MITSUBISHI M64 Accessories Full Enclosure

Upgrated Siemans 808D Advaned Control, Upgrated Servos, 50 ACTUAL CUTTING HOURS, 22 BT. Tool Holders, All Manuals LIKE NEW CONDITION, VIDEO AVAILABLE

Machine equipped with: CNC Heidenhain TNC 530 Electronic Flywheel Chip Extractor 20 bar Internal Refrigeration Standard Refrigeration 24 ATC Machine location: Gijón, Spain

This Avia VMC 650 Milling Machine was made in the year 2008 in Poland. It is equipped with a Fanuc Series Oi-MC control unit. This machine counts with a spindle speed up to 10000 rpm. It presents good conditions.

VERTICAL MACHINING CENTER

DEMO Machine

Awea LG-5030II, X-196", Y-118", Fanuc 18iMB, 32 Station ATC, 137" Between Columns, #30363

This AXA VCC 1200 Vertical Machining Center was made in the year 2012 in Germany. It has a production history of 32422 working hours since then. It is operated with a Heidenhain iTNC 530 control unit. This machine has a spindle speed range up to 12000 rpm. It includes a tool holders, a renishaw w...

This AXA VCC 1200 Vertical Machining Center was manufactured in Germany in the year 2012. It has been working for 33704 hours since then. It is equipped with a Heidenhain iTNC 530 control unit. This machine has a spindle speed range up to 12000 rpm. It includes a tool holders, a renishaw workpiec...

Delta 2000, 42.22.24", 6000 RPM, Cat 40, Manual Indexer, Conversational Programming

Bostomatic 12G 13"X 16"Table 230V 3Ph CNC Vertical Mill W/30k Spindle New 00 (#18157)

Bostomatic 12G VMC 2001 with: 3200X CNC Controller, 6-ATC, Chiller, Donaldson Torit VX1200 Dust Collector, and Manuals.

40” X 17” CNC Graphite Machining Center with Bostomatic BDC 3200X CNC Control, Tool Setter, Ethernet, Glass Scales, Complete Graphite and Dust Removal Ventilation System, Donaldson Torit Dust Collection Filter System, Spare Filters, Spindle Chiller, Transformer, 15 Tool Holders, 46 Collets, All A...

(1) Used Bridgeport Model GX 480 APC CNC Vertical Machining Center, New 2014, Travels: X-Axis 18.90” (480mm), Y-Axis 15.80” (400mm), Z-Axis 16.90” (430mm), Spindle Taper No. 40, BIG PLUS®,Tool Holder CT40, Motor Power Rating CT/30/15/1min. 7.5/10/20HP (5.5/7.5/15kW) FANUC i...

This Bridgeport GX 600 Vertical Machining Center was built in 2007 in the United Kingdom. Equipped with a SIEMENS SINUMERIK Control unit, this machine can operate with a spindle speed up to 8000 rpm.