BERTHIEZ BM 225
Berthiez BM225 single column vertical borer Travelling table type, 2500mm table, swings normally 4.5 metres but has been extended 6 metre diameter.
TOSHIBA TSS 30/55
118"/216" Toshiba TSS 30/55A, Ram, Sliding Table, 216" Swing, 109" U/R, 80 RPM, DRO, 85 HP (VSD), #31310
HANKOOK VLC 30/70
Type of machine CNC VTL Make HANKOOK Type VLC 30/70 Build in 2004/2016 Type of control FANUC 18i-TB Faceplate diameter 3.000 mm Max. Swing diameter7.000 mm Turning height max. 3.000 mm Max. workloa...
HANKOOK VLC 30/70
HANKOOK CNC VTL Model VLC 30/70 w/ 24 ATC, & C axis & live tools, Under Power Built in 2004 and refurbished in 2016 Type of control FANUC 18i-TB Faceplate diameter 3.000 mm Max. Swing diameter7.000...
TOSHIBA TSS-30/55A
Toshiba TSS 30/55A CNC, 118" Table, 216" Swing, 50 HP, Sliding Table, Fanuc CNC, #32559
O-M TMSI-36/70
141"/275" O-M LTD TMS-1 36/70, 275" Turning Diameter, 114" Under Tool, 40 RPM, Fanuc 16T-A, #31707
O-M TMD-40/55 CNC
CNC Double Column Vertical Lathe Model TMD-40/55 manufactured by O-M Ltd. (Japan) Modified and equipped with CNC FANUC21i-T in 2002 Table diameter 4000mm Maximum turning diameter 5500mm Maximum tu...
O-M TMD44/55
157" O-M TMD44/55, 216" Swing, 145" U.R, 160,000Lb. Tbl Cap. .23 - 60 RPM, 2- Ram, Fanuc 21i-T, 127 HP, #43349
TOSHIBA TD-40/65S
φ6500 T:φ4000 4Jaw chuck 0.8~40rpm(18 steps) AC75Kw(Inverter) Table load:50t Rotation force:16t・m Table top~Cross bottom:4000mm Vertical Ram stroke: 1600 Ram left-right tilt angle:30° Gradient cu...
BLANSKO SK-50A
BLANSKO SK-50A Dual Column CNC Vertical Boring Mill With Retrofitted Siemens 828D CNC Control ** Top Operating Under Power for Inspection.
CARNAGHI TG.50/6000
196"/236" Mario Carnaghi TG.50/6000, Ram w/ Live Spindle, C-Axis, Angle Heads, Siemens 840DE CNC, New in Stock #32623
FRORIEP 40KE 500/600-400 SPHEROMILL
The machine is in absolutely best condition, only the structure is from 1969 the rest was changed during the years. The company invested a lot of money on the machine.
FRORIEP 40KE 500/600-400 SPHEROMILL
Universal Machine 4-axis (turning, milling) Froriep 40KE 500/600-400 Spheromill Year: 1969 (modernized 1984 and 2006) Control: Siemens 840D Swing: 6000 mm Milling length: 8500 mm/ table is moving ...
HNK VTC 5080
Cutting Capacity Table Diameter 5,000 mm Swing/Turning Diameter 8,500 mm Turning Height 4,000 mm ...
SCHIESS 3VKE 500/900
Schiess VKE 500/900,197" Table, 355" Swing, Openside, Live Spindle, 100 Ton Cap.,120HP, Fanuc 18-TB, #25414
CKD BLANSKO SKJ 50-100
CKD BLANSKO SKJ 50-100 CNC SINGLE COLUMN VERTICAL BORING & MILLING MACHINE With Live Spindle Table C-Axis New In 1993. Commissioned In 1994. Rebuilt & Retrofit in 2006 Excellent Condition Rebuilt &...
HNK VTC 50/85
EXCELLENT CONDITION. Featuring: * Fanuc 31i CNC Control System with 104” TFL LCD – M.P.G. Handle. Live Spindle, C axis Machining, Table Indexing 0.001 deg. Attachment Changing Device, Right Angle...
HNK VTC-50/60
TURN MILL LIVE SPINDLE, TABLE C-AXIS. Live Spindle Speed 1500 rpm, Live Spindle Motor 22/26 kW, C-Axis 0.001 deg. Indexing, Table C Axis Speed 0-0.3 rpm.. Fanuc 32iTB CNC Control System with 15" TF...
D-F CK5263M
NEW D-F 6.3m (248") Model CK5263M Vertical Turning/Milling Center with Live Tooling & C axis, 30 ATC. 50 Ton Work-Piece Capacity 280mm square single ram.
OM TMD-55/60N
216" Table, 236" Swing, 145" Turning Height, Dual Fanuc 18-T CNC Controls
NILES DKZ 6300X3500
216"/248" Niles DHZ, 2-Rams, 248" Swing, 138" Under Rail, 71" Ram Stroke, DRO, 100 HP,'60 #22789
O-M LTD TMD 55/60N
216" O-M Ltd. TMD 55/60N, 236" Max Dia., 145" U/R, 66T Tbl Cap., .3-45 RPM, Fanuc 18-TB Ctrl, 1995, #32263
O-M LTD TMD 55/60N
216" O-M Ltd. TMD 55/60N, 236" Max Dia., 145" U/R, 66T Tbl Cap., .3-45 RPM, Fanuc 18-TB Ctrl, 1995, #32264
RCD 13M SWING
RCD (UK) 13m (512”) CNC Double Column, Double Ram Vertical Turning Lathe. Fanuc CNC controls. Retrofitted in 2012
EMSIL VTL-60X63
2 RAMS, 1 For Turning & Milling (Live Spindle), 1 For Turning Only Heidenhain Linear Scales, Faceplate with 8 Jaws Operator Platform, Centralized Hydraulic & Lubrication Unit Full Enclosure (withou...
STANKO 60/63
Stanko 60/63, Retrofit 2017, 236" Table, 248" Swing, 183" U.R, 96" Stroke, Milling, Fanuc 31i CNC, #29555
D-F CK5280
D-F 8,000mm (315”) Model CK5280 CNC Double Column Vertical Turning Lathe
CKX 5280 X40/160
248" CKX Model 5280, 314" Turn Dia., 157" U/R, Live Milling, 46 HP, 167 HP Table Drive, Siemens 840DE,#28360
DORRIES SDE+600
Dorries SDE600 248" Table, 566" Swing, 193" U/R, Openside, Live Spindle, 250 Ton Cap.,150HP, Siemens 840C, #32060
SCHIESS 4/2 VKE 640/1200
6400/12000 MM SCHIESS VERTICAL BORING MILL WITH LIVE SPINDLE, 1968 MANUFACTURER : SCHIESS MODEL : 4/2 VKE 640/1200 YEAR : 1968 S/N: 73466 TABLE DIA. : 252" (6400 MM) MAXIMUM TURNING DIAMETER : 46...
PIETRO CARNAGHI AS65
CNC-VTL / Vertical Lathe for turning & grinding + ATC Carnaghi - Pietro Carnaghi Model AS 65 Year of manufacture 1991 Retrofit & full overhaul 2014 Siemens 840D CNC control Face plate/chuck diame...
HOMMA HTM 7.0/9.0
275"/ 354" Homma HTM 7.0/9.0 Gantry Travel, Milling, 157" Work Ht.,275" Table, 200 HP , Fanuc CNC
TOSHIBA TMG-10750S
Toshiba TMG-10750S, 314.96" Table, 425" Swing, Fanuc 18i, 171" U/R, 7-Axis, Milling, 100 HP, C-Axis, #32236
CKD BLANSKO SKJ 80-140
Excellent Condition Rebuilt & Retrofitted In 2010. Installed In 2012 * With Live Spindle & Table C-Axis
SCHIESS FRORIEP
393"/590" Schiess Froriep, 2-Rams, 196" Under Rail, 220 Ton Weight Capacity, 250 HP, Siemens 840D Rebuilt '99 #25078
ACCUT ACCUT-VTL-160CNC
"Product Introduction: ■ Such series of products adopt modularization design and the function can be selected arbitrarily. The product design is mature and reliable, thus, large amount of users hav...
PIETRO CARNAGHI AP 140 TMY
TURNING DIAMETER…………………………………………14000mm TABLE DIAMETER…………………………………………….10000mm ALLOWED STANDARD WEIGHT…………………..350 TONS (metric) MAXIMUM WEIGHT ALLOWED…………………...500 TONS (metric) MAXIMUM RPM………………...