BUDERUS 235 MA
Largest workpiece diameter: 150 mm Max. workpiece diameter: 280 mm Largest swing diameter above the table:200 mm Height of the workpiece spindle above the floor: 1250 mm Workpiece spindle speeds NC...
CNC NEW, INC. GT-ISL50
2016 CNC New GT-ISL50 CNC turning center. Machine is in very good condition and can be inspected under power as needed. Machine has a gang style turret.
CNC NEW, INC. GT-ISL50
2014 CNC New GT-ISL50 CNC turning center. Machine is in very good condition and can be inspected under power as needed. Machine has a gang style turret.
COLCHESTER TORNARDO A 50
Bar feeder included Chip conveyor Collet device with inserts Working hours 5800 H Max. turning Ø:170mm X-Axis: 170mm Z-Axis: 350mm Spindle bore: 42mm Speedrange: 4000Rpm Spindle...
CUBIC GT MINI PLUS
CUBIC GT-MINI PLUS CNC LATHE (2 AVAILABLE)CUBIC GT-MINI PLUS CNC LATHE (2 AVAILABLE)
DOOSAN LYNX 2100LSY
With FANUC i-Series CNC Control, Chip Conveyor, Coolant System, Sub Spindle, LNS Bar feeder & Tool Pre-setter
EMAG VL 1 TWIN
This twin-spindle turning machine is perfect for the manufacturing of workpieces up to 75mm (3in) in diameter. With two main spindles in one machining area, the VL1 TWIN can simultaneously machine ...
EUROTECH 710SLL
1998 Eurotech Elite 710SLL Quattroflex Multi-Axis CNC Lathe, C-Axis, Live Tooling, High-Pressure Coolant, Coolant Filtration System, Bar Feeder, Programmable Parts Catcher, Boring Bar Holders, Chip...
HARDINGE CHNC
Lot 155: Hardinge CHNC CNC Chucker w Allen Bradley 7300 CNC Control Equipped With: Allen Bradley CNC Control, 8 Position Tool Turret, Vertical Cut Off Slides, Air 5C Collet Closer, Enclosure Manu...
KITAKO HS4200
2013 Kitako HS-4200 with Fanuc OiTD CNC Control and Fanuc Dual Robot Integrated Installed Robotic Part Loaders and All Input-Output Conveyors Systems and Flexible Post Process Gauging Systems and a...
LEADING EDGE INDUSTRIAL HX710
The HX710 Turning Center (TC) is a compact, yet incredibly versatile, totally enclosed, Benchtop CNC lathe, suitable for all skill levels. The small footprint of the HX710 TC allows it to comfortab...
MAZAK INTEGREX I400ST
2012 Mazak Integrex I-400ST Multi-Axis CNC Lathe, 12000 RPM Milling Spindle W/ Coolant Through, Sub-Spindle, B-Axis, Y-Axis, 12" And 10" Kitagawa Hydraulic Chucks, Chip Conveyor
MAZAK INTEGREX I400ST
2011 Mazak Integrex I-400ST Multi-Axis CNC Lathe, 12000 RPM Milling Spindle, Sub-Spindle, B-Axis, Y-Axis, Hydraulic Chucks, Chip Conveyor
MORI SEIKI NZ2000 T2Y
CNC controller: F31iA5 (MAPPS 4) Capacity X-axis travel mm: 210 Y-axis travel mm: 110 Z-axis travel mm: 810 B-axis travel mm: 360º(0,001) Turning length mm: 310 Max. turning diameter mm: ø...
MURATEC ML400
Muratec Model ML 400G CNC turning centers . machines are specially equipped with Optional heavy duty A/C spindle motors, tailstocks, single turrets, Gantry loaders, part holders, chip conveyors, to...
MURATEC MW80
2014 Muratec MW-80 GT Twin Spindle with Twin Gantry Loaders Feature Super High-Speed Processing with for high-speed processing of parts up to 80mm ( 3.14") in diameter for Shorter Cycle Times With ...
NAKAMURA-TOME SUPER NTM3Y
(1) Nakamura-Tome Super NTM 3 (3 turret, Y axis) CNC Lathe (used) New 2008 w/Fanuc 16iTB control, Collet Chuck For Head One And Head Two, LNS Chip Conveyor, High Pressure Coolant Unit, LNS Quick Si...
OKUMA LFS10-2SP
ONE USED OKUMA TWIN SPINDLE CNC LATHE with loader/unloader and gantry system Hours: as of 8/28/20 and now in warehouse. PRICE REDUCTION -SELLING AS IS FOR $10,000.00 Run: 67,330 Operate: 19,585 ...
OKUMA LFS10-2SP
Okuma LFS10-2SP, 8.6" Swing, 3.9" Machining Length, 6" Chuck, Parts Loader, OSP-U100L CNC, #32336
OMNITURN GT-JR
Omniturn GT Junior Series I CNC Gang Tool Turning Center w/ Bar Feeder
QUICK-TECH T8 HYBRID
2016 Quicktech Model T8 Hybrid 9-Axis CNC Lathe, Twin Spindle, Milling, B-Axis, Fanuc 0i0TF Control, 4,000 RPM, Low Hours Equipped With; - Fanuc 0i-TF CNC Control - Full C-Axis - Main and Sub-Spi...
TAKAMAZ XW-180
Takamaz XW-180 Dual Turret/Spindle CNC Turning Center, New in 2007
TAKAMAZ XW-180
Takamaz XW-180 Dual Turret/Spindle CNC Turning Center, New in 2006
TONGTAI MT-2000
- Kitagawa Chucks, Dual Gantry Loaders, Dual Stockers