BONARDI 4M GEARLESS 8C
- نظرة عامة على المنتج
THE PERFECT GEARLESS PRINTING MACHINE, SUITABLE FOR ANY TYPE OF PRINTING JOB.
HIGH PERFORMANCE MACHINE WITH A VERY INTERESTING PRICE !
4M Gearless, innovative machine for printing quality.
full machine production in Bonardi company
A sleeve changeover central impression GEARLESS press.
MAIN TECHNICAL FEATURES
Nr of printing decks 8
Printing width max from 800 up to 1600 mm
Repeat range 340-800 mm
Side register capability +/- 10 mm
Up-down register capability +/- 7 mm
Mechanical speed 350 m/min
Safety standard according EC codes
Colour light grey RAL 9018Press performances
Printing speed up to 350 m/min. The actual printing speed is in relation with raw materials quality, repeat and job design.
Half tone process jobs of 54 lines/cm and over can be accomplished for proper Anilox screen selection and high quality pigmented Flexo inksImportant Specific Technical Features
High quality press with several innovative technical features.
Without hydraulics on board and consequently without oil leakage and with a low necessity of maintenance.
Horizontal sequential throw-off.
Inking with chambered doctor blades and ceramic coated anilox sleeves.
Printing heavy duty section frame 120 mm thick.
Outfeed chill rollers with OD 290 mm.
Automatic web tension control during the entire process.Gearless Technology
Servo brushless motors for individual drive of printing and anilox mandrels.
Main servo motor for C.I. drum.
A total of 17 servo motors on printing section plus 32 stepping motors and 8 motors for side register.
Use of large needle bearings positive guides.
Automatic pre-register ( up / down ) to reduce start-up time and waste.
Repeat infinitively variable from 340 up.
Possibility to use any thickness of plate + sticky back adhesive. - عن الشركة
Bonardi Converting s.r.l. is an Italian producer of flexo printing presses, laminators and slitters located in Northerm Italy, less than an hour driving from Milano. Production covers state of the art 8 and 10 colours gearless C.I., various models of geared C.I. press but all with sleeve changeover system. Good stack type, solventless and solvent based laminators, slitters are in the production program of Bonardi s.r.l.. Over two hundred Bonardi’s machines are working in the world ! A great in-house mechanical workshop, a good team of engineers to accomplish installation, start up, training and after sale service. Only a.c. motors and digital drives on all Bonardi equipments !