العلامة التجارية
  • نظرة عامة على المنتج

    This Permadur Series 918 Large Plate Handling System was built with 18ea. TP-2000 Lifting Magnets on a 36’ Load Beam that enables the System to be suspended either from a Fork Truck or a Single/Double Hook Overhead Crane. Each of the Magnet Crossarms can be manually repositioned on the load beam.

    The Controller provides selectivity by Row, 9ea., and is powered by an “On Board” 24VDC Wet Cell Battery Power Supply w/built in Charger. Radio Controls enable the Fork Truck or Crane Operator to control the System from the cab and a backup hard wired PB Pendant is also included.

    The Controller also offers Permadur’s Exclusive Safety Indicator Lighting System that confirms the Magnets have attached to the load in preparation for a safe lift. Permadur Lifting Magnets are electrically Controlled Permanent Lifting Magnets that will not drop a load due to loss of electrical power.

  • عن الشركة
    Permadur Industries Inc.

    Manufacturers of magnetic lifters, positioners & machinery. Magnetic lifters utilize permanent magnets so they won't release the load if power is lost, for single sheet separations, large & small parts. Positioners employ hydraulic control below the hook for precision lowering the last few critical inches. Machinery includes full line of hot stamping & heat transfer machinery & complete industrial control systems utilizing servos, PLC's & computer controls.

تبحث لشراء جديد PERMADUR TP-2000 ؟