MITSUBISHI CARBIDE AEMW 1503093ER

MITSUBISHI CARBIDE CCGT

Turning Insert - 80-degree diamond, 7-degree positive rake General Purpose flat top insert.

MITSUBISHI CARBIDE CCMT

Turning Insert - 80-degree diamond, 7-degree positive rake insert for Light Roughing and Finishing

MITSUBISHI CARBIDE CCMT 3(2.5)1

MITSUBISHI CARBIDE CCMT 3(2.5)2

MITSUBISHI CARBIDE CCMT-FV

Turning Insert - 80-degree diamond, 7-degree positive rake insert for Fine Finishing.

MITSUBISHI CARBIDE CCMT-SQ

Turning Insert - 80-degree diamond, 7-degree positive rake insert for Finishing

MITSUBISHI CARBIDE CCMW

Turning Insert - 80-degree diamond, 7-degree positive rake Flat Top insert for General Purpose.

MITSUBISHI CARBIDE CNMA

Turning Insert - 80-degree diamond, negative rake flat top insert for General Purpose.

MITSUBISHI CARBIDE CNMA 432

MITSUBISHI CARBIDE CNMG

Turning Insert - 80-degree diamond, negative rake insert for Light Roughing and General Purpose.

MITSUBISHI CARBIDE CNMG-C

Turning Insert - 80-degree diamond, negative rake insert for Light Cutting.

MITSUBISHI CARBIDE CNMG-FH

Turning Insert - 80-degree diamond, negative rake insert for Finishing.

MITSUBISHI CARBIDE CNMG-FS

Turning Insert - 80-degree diamond, negative rake insert for Finishing Mild Steel.

MITSUBISHI CARBIDE CNMG-GH

Turning Insert - 80-degree diamond, negative rake insert for Roughing.

MITSUBISHI CARBIDE CNMG-MA

Turning Insert - 80-degree diamond, negative rake insert for Light Roughing and General Purpose.

MITSUBISHI CARBIDE CNMG-MH

Turning Insert - 80-degree diamond, negative rake insert for General Purpose and Medium Roughing

MITSUBISHI CARBIDE CNMG-MS

Turning Insert - 80-degree diamond, negative rake insert for Medium Cutting. Ideal breaker for low machinability metals

MITSUBISHI CARBIDE CNMG-MW

Turning Insert - 80-degree diamond, negative rake Wiper insert designed for Medium Finishing.

MITSUBISHI CARBIDE CNMG-SA

Turning Insert - 80-degree diamond, negative rake insert for Light to Medium Cutting.

MITSUBISHI CARBIDE CNMG-SH

Turning Insert - 80-degree diamond, negative rake insert for Semi Finishing.

MITSUBISHI CARBIDE CNMG-SW

Turning Insert - 80-degree diamond, negative rake Wiper insert designed for Light Finishing.

MITSUBISHI CARBIDE CNMM-HA

Turning Insert - 80-degree diamond, negative rake insert designed for Heavy Roughing.

MITSUBISHI CARBIDE CNMM-HV

Turning Insert - 80-degree diamond, negative rake insert designed for Heavy Roughing.

MITSUBISHI CARBIDE CNMM432KMS

Turning Insert - 80-degree diamond, negative rake insert designed for Medium Roughing.

MITSUBISHI CARBIDE CNMP432

Turning Insert - 80-degree diamond, negative rake insert designed for Medium cutting.

MITSUBISHI CARBIDE CPG

Turning Insert - 80-degree diamond, 11-degree positive rake flat top insert for General Purpose.

MITSUBISHI CARBIDE CPMT-MQ

Turning Insert - 80-degree diamond, 11-degree positive rake insert for Medium Finishing.

MITSUBISHI CARBIDE CPMT-SQ

Turning Insert - 80-degree diamond, 11-degree positive rake insert for Medium Finishing.

MITSUBISHI CARBIDE DCMT

Turning Insert - 55-degree diamond, 7-degree positive rake insert for Semi Finish and Finishing.

MITSUBISHI CARBIDE DCMT-FV

Turning Insert - 55-degree diamond, 7-degree positive rake insert for Fine Finishing.

MITSUBISHI CARBIDE DCMT-SQ

Turning Insert - 55-degree diamond, 7-degree positive rake insert for Finishing.

MITSUBISHI CARBIDE DCMW

Turning Insert - 55-degree diamond, 7-degree positive rake general purpose flat top insert.

MITSUBISHI CARBIDE DEGX-R/L

Turning Insert - 55-degree diamond, 20-degree positive rake insert for Aluminum application.

MITSUBISHI CARBIDE DNGG-R/L

Turning Insert - 55-degree diamond, negative rake insert for Medium and Fine Finishing.

MITSUBISHI CARBIDE DNMA

Turning Insert - 55-degree diamond, negative rake general purpose flat top insert.

MITSUBISHI CARBIDE DNMG

Turning Insert - 55-degree diamond, negative rake insert for Light Roughing and General Purpose.

MITSUBISHI CARBIDE DNMG 432

MITSUBISHI CARBIDE DNMG 433

MITSUBISHI CARBIDE DNMG 433SA

MITSUBISHI CARBIDE DNMG 543

MITSUBISHI CARBIDE DNMG-C

Turning Insert - 55-degree diamond, negative rake insert for Light Cutting.

MITSUBISHI CARBIDE DNMG-FH

Turning Insert - 55-degree diamond, negative rake insert for Finishing.

MITSUBISHI CARBIDE DNMG-FS

Turning Insert - 55-degree diamond, negative rake insert for Finishing Mild Steel.

MITSUBISHI CARBIDE DNMG-GH

Turning Insert - 55-degree diamond, negative rake insert for Roughing.

MITSUBISHI CARBIDE DNMG-MA

Turning Insert - 55-degree diamond, negative rake insert for Light Roughing and General Purpose.

MITSUBISHI CARBIDE DNMG-MH

Turning Insert - 55-degree diamond, negative rake insert for General Purpose Medium Cutting.

MITSUBISHI CARBIDE DNMG-MS

Turning Insert - 55-degree diamond, negative rake insert for Medium Cutting. Ideal for low machinability metals.

MITSUBISHI CARBIDE DNMG-SA

Turning Insert - 55-degree diamond, negative rake insert for Light to Medium Cutting.

MITSUBISHI CARBIDE DNMG-SH

Turning Insert - 55-degree diamond, negative rake insert for Semi Finishing.