WRIGHT MACHINE TALON P-3C
The Talon P-3C is designed to profile grind and bevel circular saws with a state-of-the-art computer control system to accuratley profile grind, maintain wheel shape, diameter, and wheel R.P.M. Wit...
WINSLOW ENGINEERING HR
Quick setup and changeover for lower drill quantities; grinds Bickford Point in a single cycle Automatic infeed and cycle counter Cam-generated motion and rotation of the drill assures concentric d...
WINSLOW ENGINEERING HC
Quick setup and changeover; extreme versatility; for lower drill quantities Cam-generated motion and rotation of the drill assures concentric drill points Manual profile, tracer-type dresser duplic...
WINSLOW ENGINEERING 932
The 932 Autoloader Drill Point Grinder is a machine for grinding Conventional and Helical points on drills in the diameter range of 1/2" (12.7mm) - 1" (25.4mm). Maximum hourly production rate: 250 ...
WINSLOW ENGINEERING 525
Computer-controlled servo feed 360° workhead clamping of drill during grinding; 180° workhead indexing of drill ±15' Automatic, self-compensating, tracer-type dresser duplicates dresser cam form on...
WINSLOW ENGINEERING 520
WINSLOW ENGINEERING 100C
High-quantity grinder; production is predictable with electronic "Pace Setter" control. Automatic, self-compensating, tracer-type dresser duplicates dresser cam form onto wheel
WINSLOW ENGINEERING 1000CC
Hopper-loaded machine for jobber-length drills Designed for new drill manufacture only Cam-generated motion and rotation of the drill assures concentric drill points Automatic, self-compensating, t...
WEISS MACHINERY UDG-80A
WEISS MACHINERY UDG-60A
WEISS MACHINERY UDG-25A
WEISS MACHINERY UDG-21A
WEISS MACHINERY DG-26A/D
WEISS MACHINERY DG-13A/D
WEISS MACHINERY CG-F6
WEISS MACHINERY CG-F4
WEISS MACHINERY CG-A4
VULMAC V-28
VULMAC 13
VERTEX VDG-13A
STERLING MCDONOUGH DV220F
STERLING MCDONOUGH DV
STERLING MCDONOUGH DG
SHARPERDRILLS DGS-29
SHARPERDRILLS DGS-25
SHARPERDRILLS DGS-21
SHARPERDRILLS DGS-19
SHARPERDRILLS DGS-18
SHARPERDRILLS DGS-11
SHARPERDRILLS DGS-09
SHARPERDRILLS DGS-07
SHARPERDRILLS DGS-05
SHARPERDRILLS DGS-01
RUSH 382S
The Model 382S offers a unique combination of versatility and capacity. It has a dual-cam workhead for grinding both odd (1, 3, 5 & 7) and even (2, 4, 6, 8 & 10) numbered flutes and the large capac...
RUSH 380
The Model 380 is a heavy-duty machine designed for grinding even numbered fluted drills, taps, reamers, countersinks and endmills up into the larger sizes - 3/16" to 3-1/8" (5 - 80 mm). It is avai...
RUSH 252S
RUSH 252
The Models 250A, and 252 have a capacity of 3/32" to 2" diameter. The Model 252 is the most versatile drill and tool grinder available today. The 252 can grind odd-numbered fluted tools (1, 3, 5 &...
RUSH 250A
The Models 250A, and 252 have a capacity of 3/32" to 2" diameter. The Model 250A has a 2:1 ratio only. All models use hardened cams and the cam change takes only 5 seconds. When no cam is in place...
RUSH 132C
The Model 132C incorporates versatility, rapid setup and accuracy into a rugged and affordable machine. It has a .080" (2 mm) to 1.25" (32 mm) diameter capacity and it can grind tools with 1, 2, 3...