AKIRA SEIKI H3XP
Features : Table 320mm Compact horizontal machine working with fast twin pallet. (OPT: 6 pallets) Combining the advantages of compact floor size and time saving while waiting for machine to stop t...
AMADA THV-150
KAUFMAN DUOFLEX
The Kaufman DUOflex Horizontal Twin Spindle Machining System is designed for lower volume projects requiring a high-speed machine with ample power at the spindle. The load/ unload area is segregate...
KIRA KN 30HS
KITAMURA MYCENTER-HX250IG
Features • Drastically reduces set-up times for small, detailed, highly accurate complex parts • Amazingly small footprint saves on valuable floor space • Positioning Accuracy: ±0.000078” Full Stro...
MAKINO N2
The N2 is a 4-axis horizontal machining center that delivers high-productivity machining capabilities in a compact design that requires a mere 26 square-feet of floor space. Key N2 design features ...
MAKINO N2-5XA
A 5-axis horizontal machining center, the N2-5XA is specifically designed for high-productivity, near-net-shape machining of medical parts and high-volume die cast components. Its twin direct-drive...
MIKRON XT-ONE
MUGACENTER H4030
REALMECA RM H
SAMAG MFZ 4-3W
Move into the fast lane with our multi-spindle machining centres - take advantage of our tried and tested excellent technological processing concepts. The processing can be carried out, depending ...
SAMAG MFZ 4-4W
Move into the fast lane with our multi-spindle machining centres - take advantage of our tried and tested excellent technological processing concepts. The processing can be carried out, depending ...
SAMAG MFZ 6-4W
Move into the fast lane with our multi-spindle machining centres - take advantage of our tried and tested excellent technological processing concepts. The processing can be carried out, depending ...
SCHMID MASCHINEN SE 410
The dual-spindle machining centre SE 410 is designed for series production and allows moving each spindle alone and individually. Thus, the correction options are given in X, Y and Z axis, benefici...
SCHMID MASCHINEN SE 460
This machining centre is characterised by high efficiency and minimal space requirements. The horizontal slide with the holder of the guide rails of the machining units is located on the machine b...
SW BA 222
Machining small workpieces with two spindles The two-spindle BA 222 machining center with working area dimensions of 200 x 350 x 300 mm per spindle is setting new standards for 4 and 5-axis machin...
SW BA 321
With the new BA 3 series, development continues. Monobloc design is combined with a 3-axis unit, a double swivel table, and 2 or 4 horizontal spindles with a spindle distance of 300 and 150 mm resp...
SW BA 322
With the new BA 3 series, development continues. Monobloc design is combined with a 3-axis unit, a double swivel table, and 2 or 4 horizontal spindles with a spindle distance of 300 and 150 mm resp...
SW BA 341
With the new BA 3 series, development continues. Monobloc design is combined with a 3-axis unit, a double swivel table, and 2 or 4 horizontal spindles with a spindle distance of 300 and 150 mm resp...
SW BA 342
With the new BA 3 series, development continues. Monobloc design is combined with a 3-axis unit, a double swivel table, and 2 or 4 horizontal spindles with a spindle distance of 300 and 150 mm resp...
SW BA 422
Taking what is great and making it even better is a never-ending pursuit, even when concerned about eclipsing the already proven and successful. The BA 400 set a trend that is continued by the BA 4...
SW BA 422 BLOCK
Taking what is great and making it even better is a never-ending pursuit, even when concerned about eclipsing the already proven and successful. The BA 400 set a trend that is continued by the BA 4...
SW BA 442
Taking what is great and making it even better is a never-ending pursuit, even when concerned about eclipsing the already proven and successful. The BA 400 set a trend that is continued by the BA 4...
SW BA 642
The BA 6 opens up new dimensions in produc- tivity for OEMs in highly dynamic 4- and 5-axis machining of steel and cast components in the 600 mm range. Compared to the previous series BA 600, the n...
SW BA 742
Bigger, stronger, faster, and more energy efficient – these were the main targets we set during the development of the new 7 series. Bigger in terms of spindle distance (700 mm) and work area; stro...
SW BA W02-22
Precision and maximum dynamics for economical freeform surface machining are the special domain of the new BA W02. The machining center is setting new standards in 5-axis machining with linear and ...
SW BA W04-22
If you are searching for the optimal MC for machining aluminium parts, look no further. The W04 – with direct drive technology in all axes – is equipped with linear motors in the X-, Y- and Z-axes,...
SW BA W04-22 BLOCK
If you are searching for the optimal MC for machining aluminium parts, look no further. The W04 – with direct drive technology in all axes – is equipped with linear motors in the X-, Y- and Z-axes,...
SW BA W04-42
If you are searching for the optimal MC for machining aluminium parts, look no further. The W04 – with direct drive technology in all axes – is equipped with linear motors in the X-, Y- and Z-axes,...
SW BA W06-42
Do you machine large aluminium workpieces such as gearbox housings or bedplates? Are they around 600 mm long? Is a large proportion of your cycle times due to non-productive times? The BA W06 – wit...
TSUGAMI FMA3-III (10P)
●Vertical-type pallet system of this machine permits free-chip-flow structure. High accuracy is achieved even in unattended operation. ●ATC tool-to-tool time : 1.0sec. X/Y/Z-axis rapid traverse rat...
TSUGAMI FMA3-III (2P)
●Vertical-type pallet system of this machine permits free-chip-flow structure. High accuracy is achieved even in unattended operation. ●ATC tool-to-tool time : 1.0sec. X/Y/Z-axis rapid traverse rat...