LOCKFORMER ROTO NOTCHER
Dove-tail notch out of 24 to 30 gauge galvanized — in only one pass! Just cut to width and length or use scrap. This machine uses either 3" or 6" width blanks with simple adjustment.
RAMS 2001
Notch drive cleats before or after they are formed. Mounts readily to a bench. Easy spring loaded push handle. Easy to change hardened shear blades.
TIN KNOCKER EDGE
Round surface edges for collars and end caps.
VICON EDGE NOTCHER
The Vicon Edge Notcher has an unlatching feature so that round pipe can be notched after it is rolled. Tap-in locks can be notched after they are roll formed. The punch will notch right up to the ...
TENNSMITH 16-18
The heavy cast iron construction allows the notcher to be used to side shear six inches of material to its rated capacity; and the throat behind the upper ram is beveled on one side to permit long ...
BAILEIGH SN-F16-FN
Notching corners is a staple of any fabrication shop. Good clean notches are the difference between a great product and a not so great one. The SN-F16-FN sheet metal corner notcher is an economic...
BAILEIGH SN-F16-HN
The SN-F16-HN manual corner notcher is a high quality cast iron sheet metal notcher perfect for any garage or sheet metal shop. The cutting angle is fixed at 90 degrees and can notch up to 6" x 6" ...
JET HN-16T
JET’s high quality cast iron sheet metal notcher is ideal or any garage or sheet metal shop. It's compact design makes it perfect for on-site use. The cutting angle is fixed at ninety degrees and c...
KIDDER 68B
Long the industry standard, this popular 6" x 6" gauge Notch-Master comes equipped with reversible blades. This means that you can splay or pierce cut and adds coping to your capabilities. This mac...
LOCKFORMER SPEEDNOTCH 16
Speednotch allows you to gang-notch sheet metal hydraulically up to 600% faster than by hand, without layout or scribing. It’s the perfect tool for preparing ductwork to receive bar, slip or “S” a...
TIN KNOCKER 1655
A heavy versatile tool capable of not only notching to capacity but also shearing and piercing operations in lighter gauge. Of heavy cast iron and fabricated construction, this table top machine co...
LOCKFORMER TDC NOTCHER
TDC NOTCHER comes standard with 5 notching heads. The Lockformer TDC NOTCHER will gang notch duct blanks as much as 6 times faster than notching by hand. The Hydraulic powered notch units have in...
KIDDER 70-S-H
Truly the finest power notcher ever made combining smooth hydraulic force, safe convenient foot control, precision and versatility. The offset head permits full 6" x 6" corner notching in 14 gauge ...
KIDDER 70S
Perhaps the finest shearing machine ever made. This 6" x 6" notcher has patented split head that adjust in seconds to any tap up to 1". Blades are reversible for either splay or piece cutting, perm...
VOGEL ECONO ARC-FIT 25
The Vogel #25 Econo Arc-Fit is the perfect tool for low-volume notching of light-wall fence industry tubing. This tool is complete with three cutting disks for notching 1-3/8”, 1-5/8” & 1-7/8 - 2” ...
BAILEIGH SN-F11-AN
The SN-F11-AN pneumatic corner notcher from Baileigh Industrial is the great machine for making perfect corners in sheet metal. The SN-F11-AN corner notcher has an 11 gauge mild steel capacity, so...
KIDDER 43B
Extra heavy duty notcher with capacity for 5" x 5" notch in 1/8" inch mild steel or 14 ga. stainless.The throat is 7" deep, permitting a full 5" x 5" corner notch. Comes with short or long handles ...
KIDDER 43BMP-S
This heavy duty hydraulically operated 5" x 5" notching machine can be used for shearing, squaring and trimming. Kidder's hydraulic system delivers smooth, safe power from 115VAC, under foot contro...
KIDDER 59H40
Cuts a full 7-1/2" x 7-1/2" notch in 1/8" steel or shears any length to 7" width. 14 gauge capacity in stainless. Will take a full corner notch. operation is hydraulic with jug type foot control. F...
VOGEL ECONO ARC-FIT 25A
The Vogel #25 Econo Arc-Fit is the perfect tool for low-volume notching of light-wall fence industry tubing. This tool is complete with three cutting disks for notching 1-3/8”, 1-5/8” & 1-7/8 - 2” ...
BAILEIGH SN-F04-MS
If you are looking for a little more capacity from your corner notcher, try the SN-F04-MS sheet metal corner notcher from Baileigh Industrial. The SN-F04-MS is great for making perfect corners in m...
BAILEIGH SN-F09-MS
The SN-F09-MS sheet metal corner notcher from Baileigh Industrial is the perfect machine for making those perfect corners in that just are not possible with hand tools. This corner notcher has a 9...
BAILEIGH SN-V04-MS
Ever have odd angles that you need to notch out of sheet metal, something that will look totally whack when finished if not done right? Enter the SN-V04-MS; this great machine is a 220 volt three ...
VOGEL 101-HPP
The ARC-TWIN notches both sides of pipe and tubing ends for T-joints with one stroke of the press. There is no deformation, all edges are clean and the “twin notches” form perfect T-joints for weld...
SCOTCHMAN AL1
The AL1 can be used to notch 3/4", 1" and 1-1/4" Schedule 40 Pipe. This hand-operated machine can easily be wall mounted.
SCOTCHMAN AL3
The AL3 can be used to notch 1-1/4" and 1-1/2" Schedule 40 Pipe. This machine can easily be wall mounted.
SCOTCHMAN ALU
The ALU can be used to notch a sink outflow in pipes with an external diameter of 1.0630" to 2.40158".
CHICAGO DREIS & KRUMP HN-25
Chicago Dreis & Krump's productive, reliable, heavy duty, hydraulic notcher for all your notching needs. It will shear mild steel and stainless at high production speeds and it's a snap to operate....
GMC HN-25HA
Specifications Max. capacity: Mild Steel (C.R.S.) 1/4" Max. capacity: Stainless Steel 3/16" Min. notching thickness 22 Ga. Notching angle, fixed angle 90 degree Max. cutting length 10" Stroke per ...
KNUTH KAM 250
•The KAM 250 fixed-angle notches features a compact design and long cutting length •The powerful hydraulic drive and heavy, rigid construction allow machining of up to 0.3 in thick plates •Automati...
FRANKLIN CN-100
Coper Notchers are used to cope angle and flatbar to the desired cope or notch as required by your job. The notching can be square or rectangular with the dimensional parameters of the cutter and d...
BAILEIGH TN-50M
If you only need to notch small sizes of schedule 40 pipe, then the TN-50M manual pipe notcher is for you. The TN-50M might be small but it sure delivers enough punch to cope ¼”, 3/8”, and ½” sche...
FRANKLIN CN-196
Coper Notchers are used to cope angle and flatbar to the desired cope or notch as required by your job. The notching can be square or rectangular with the dimensional parameters of the cutter and d...
JD SQUARED TN-100
The TN-100 is known for its high-quality, long life, and accuracy. CNC Machined. 3/4" ground and polished stainless steel shaft. Tube Capacity 3/4" to 2" diameter at angles up to 50 degrees in u...
BAILEIGH TN-125M
Sometimes that need for a reliable manual pipe notcher pops up when you least expect it. That is where the TN-125M from Baileigh Industrial comes in. This ninety degree pipe notcher can be bolted...
SCOTCHMAN AL2
The AL2 can be used to notch 1-1/2" and 2" Schedule 40 Pipe. This machine can easily be wall mounted.
BAILEIGH TN-200E
Do you make 90 degree notches in schedule 40 pipe all day, every day? Then the TN-200E is for you. This electric tube notcher was specifically designed to notch schedule 40 pipe ranging in sizes ...
BAILEIGH TN-200M
The TN-200M is the monster of the Baileigh Industrial manual pipe notcher line. This manual pipe notcher has the ability to notch 1-1/2” and 2” schedule 40 pipe at 90 degrees. Like all Baileigh I...
BAILEIGH TN-210H
Are you looking to notch tubing economically? If so there is nothing better than a hole saw style tube notcher. The TN-210H is the perfect tube notching machine for the economical garage fabricat...
BAILEIGH TN-400
Abrasive style belt notchers have been around for a long time and over that time many have tried, Baileigh Industrial included, coming up with something better. And while the newer machines did do...
BAILEIGH TN-250
Ever have to notch tube in an awkward place, like say on a bend? Well good luck getting a tight clamp with the conventional tube notchers on the market. Baileigh Industrial took this challenge he...
BAILEIGH TN-300
The TN-300 pipe notcher from Baileigh Industrial is the best production hole saw notcher on the market today. This 110 volt notcher is built using only the best components. The idea of the TN-300...
BAILEIGH TN-600
If you are looking for a high quality top rated abrasive tube notcher made in the USA. Then look no further, the TN-600 from Baileigh Industrial is just what you are looking for. This abrasive tu...
BAILEIGH TN-800
If you are a shop that wants the best in tube and pipe equipment, then you have to look at the TN-800 tube and pipe notcher from Baileigh industrial. This patented (patent No: 6,435,783) design do...
DAKE DLN-6200
This corner Notcher has a 6mm or 4-gauge mild steel capacity, so it can make quick work of most any job. The DLN-6200 sheet metal corner Notcher machine has blades that are fixed at 90°, ensuring a...
DAKE DLN-6220V
This model hydraulic Notcher will cut notches from 30 to 140 degrees in mild steel and up to 6mm in thickness and will do this at a maximum rate of 15 strokes per minute. 24 Ton Capacity 4 Ga. Mild...
HECK WFN1
HECK WFN2
Pipe and Tubing Notchers We offer the fastest and easiest tools for fabrication of pipe and tubing notches. Creating 90° notches in the ends of tube for fence, railings, cages, and frames has never...
HECK WFN3
Pipe and Tubing Notchers We offer the fastest and easiest tools for fabrication of pipe and tubing notches. Creating 90° notches in the ends of tube for fence, railings, cages, and frames has never...