RELIANTT PT48K-1300
COMANDULLI OMEGA 60
G&P 2MSSH-2000
G&P 2MVSH-2000
BAUERRICHTER GPM-4
MARMO MECCANICA LCR 7233 M-SE
• Practical and easy to use. • Particularly suitable for pencil rounds production (on max. 40mm thickness ‐ 45° chamfers on up to 60mm thickness) • Extra mandrels and functional units available. • ...
G&P 2MSSH-1500
G&P 2MVSH-1500
TIMESAVERS 2300 SERIES | SEGMENTED POLISHER 52"
TIMESAVERS 2300 SERIES | SEGMENTED POLISHER 64"
TIMESAVERS 3300 SERIES | SEGMENTED POLISHER 52"
A dependable polisher that can be outfitted with up to four heads. Its versatility and durable design make it ideal for a wide range of woodworking projects, including veneer and lacquer sanding, p...
TIMESAVERS 3300 SERIES | SEGMENTED POLISHER 64"
A dependable polisher that can be outfitted with up to four heads. Its versatility and durable design make it ideal for a wide range of woodworking projects, including veneer and lacquer sanding, p...
BAUERRICHTER ESR 1
MARMO MECCANICA LCT 521
LCT 521 is equipped with: no. 1 CALIBRATING MANDREL to gauge thickness at an adjustable depth (max 6 cm). This mandrel can be adjusted both transversely and longitudinally with respect to the too...
DALAL CFM-240
Manufactured as per the set industrial norms and guidelines, the offered Orthopaedic Implant PolishingMachine quality never deteriorates. The high grade raw materials used in its making, make the p...
BOSSI MULTIPLA UO
Machines suitable for brushing and polishing flat parts (such as sections, sheet, plates and frames), for obtaining very high-quality finishing. The use of this machine is necessary where the p...
BOSSI F1
Thanks to the vertical working position with respect to the piece, this model allows a good removal that a traditional centreless machine can’t obtain on equal number of working units. The machine...
GARBOLI LT 130 S W
Orbital “WET” grinding line consisting of TWO PROCESSING UNITS: first head is for grinding, while second head is for the finishing of STRAIGHT parts withround,oval, elliptical or irregular section,...
GARBOLI LT 200 S
Orbital grinding line consisting of TWO PROCESSING UNITS: the first head is for grinding, while second head is for the finishing of STRAIGHT parts with round, oval, elliptical or irregular section ...
GARBOLI LT 200 S W
Orbital “WET” grinding line consisting of TWO PROCESSING UNITS: first head is for grinding, while second head is for the finishing of STRAIGHT parts withround,oval, elliptical or irregular section,...
HAUSCHILD PC-CNC
The CNC-controlled double shaft polishing machine of the series PC-CNC is designed for rough and final polishing of knife blades up to a lentgth of 550 mm (21.7 in)
HAUSCHILD PS-CNC
The CNC-controlled transfer line of the series PS-CNC consists of six to eight CNC-controlled double shaft polishing machines, an automatic exchange table and an automatic unclamping table.
G&P 2MSS1000
G&P 2MVS1000
G&P SSH-2000
G&P VHS-2000
U.S. ELECTRICAL TOOL 100-20HP
BAUERRICHTER KPM-8L
MARMO MECCANICA LCG 711
• Basic compactness • Practical and easy to use. • Suitable for average‐massive productions on up to 10cm thickness. • Extra mandrels and functional units available. • Suitable for any kind of mate...
MARMO MECCANICA LCH 711 M
• Basic compactness • Practical and easy to use. • Suitable for average‐massive productions on up to 6cm thickness. • Extra mandrels and functional units available. • Suitable for any kind of mater...
SWISS SUPER FINISHING CUTLERY
Buff width 600 mm Power 17 Hp. Oscillation Amplitude 50 cydes/ min (Variable) Max upward Movement-200 mm Floor space 1500 X 1500 mm
MARMO MECCANICA LCV 711 M
• Compact and affordable, with very low service cost. • Practical and easy to use. • Suitable for average‐massive productions on up to 6cm thickness. • Extra mandrels available. • Particularly appr...
DALAL CFM-160
Manufactured as per the set industrial norms and guidelines, the offered Orthopaedic Implant PolishingMachine quality never deteriorates. The high grade raw materials used in its making, make the p...
G&P 2MSS700
G&P 2MVS700
G&P S-6261-F
G&P SSH-1500
G&P VHS-1500
HAMMOND ROTO-FINISH 15-VTDL
VTDL Lathe— Hammond Roto-Finish is the last manufacturer that uses a cast iron base. This machine can be equiped with buffs, abrasive belts, flap wheels, scotbrite wheels or belts. This machine r...
SPEEDFAM K48GPAW
U.S. ELECTRICAL TOOL 100-15HP
U.S. ELECTRICAL TOOL 103VS-15HP
U.S. ELECTRICAL TOOL 104VS-15HP
BOSSI CPS-CP
The traditional centreless machines for grinding and polishing tubes, bars and cylindrical parts with small-medium diameters, available in various configurations, both manual and automatic, for mee...
HAUSCHILD EB1000
The single shaft polishing machine of the series EB is an end facing machine. Dependig on its configuration, it can be used for rough or final polishing of spoons, forks or similar items.
AUTOPULIT PD-4500x3000 TORPEDO
HONGJIAN HJ-TPJ
HJ-TPJ Copper surface polishing machine is developed on the basis of Japanese Copper polishing machine, combined with use experience of designers and modern numerical control technology. In order t...
GARBOLI LPC 500
Planetary grinding machine with abrasive belts for grinding, buffing and satin finishing STRAIGHT or BENT items made of stainless steel, brass, iron, aluminium or any other kind of metal, having ro...
HAUSCHILD DS1000
The double shaft polishing machine of the series DS is used for rough and final polishing of the narrow edge area of the handle neck (transition between handle and bowl) of spoons, forks and simila...
HAUSCHILD DWP/VS
Double shaft rough and final polishing of spectacle frames with or without brackets