OKK HA400
OKK HM-X6000
OKK HM1000S
New concepts in high-speed machining offer drastic improvements in speed, rigidity and durability over competing machines. Our HM series offers the fastest and most powerful machines in their class...
OKK HM1250S
New concepts in high-speed machining offer drastic improvements in speed, rigidity and durability over competing machines. Our HM series offers the fastest and most powerful machines in their class...
OKK HM1600
The HM1600 Horizontal Machining Center is the Large Parts Expert with the largest work piece capacity in its class. Machine wind turbine gear hubs, large valves and pipeline parts, engine blocks an...
OKK HM500S/40
New concepts in high-speed machining offer drastic improvements in speed, rigidity and durability over competing machines. Our HM Series offers the fastest and most powerful machines in their class...
OKK HM500S/50
The HM500/50 incorporates the long-awaited 50 taper spindle. This enables heavy-duty cutting for small parts as well as hard-to-cut materials. Our HM Series offers drastic improvements in speed, ri...
OKK HM600
New concepts in high-speed machining offer drastic improvements in speed, rigidity and durability over competing machines. Our HM series offers the fastest and most powerful machines in their class...
OKK HM6300S
Our best-selling HM600 Horizontal Machining Center has been re-invented to reach a new level of speed and productivity. This all-new horizontal machining center supports face mills up to 260mm and ...
OKK HM800S
New concepts in high-speed machining offer drastic improvements in speed, rigidity and durability over competing machines. Our HM series offers the fastest and most powerful machines in their class...
OKK HMC400
Built for extreme speed, the HMC400 comes fully loaded with features for incredibly fast cycle times. Achieving 20% faster rapid and acceleration than our phenomenally fast HM500S machine, the HMC4...
OKK HMC500
Like our HMC400 Horizontal Machining Center, the HMC500 comes fully loaded with features for incredibly fast cycle times. Achieving 20% faster rapid and acceleration than our phenomenally fast HM50...
OKK MCH10000
The new MCH10000 boxway horizontal machining center for super heavy-duty cutting inherits the features of OKK's MCH series which have been proven over the years. A 3-step gear spindle develops 1,82...
OKK MCH600
Designed For Ultra Heavy-Duty Cutting - With its wide range of rated output, the spindle meets a variety of cutting requirements as well as provides ultra heavy-duty cutting. The whole machine is a...
OKK MCH8000
Heaviest cutting capacity in the world! New MCH8000 box way machining center for super heavy-duty cutting inherits the features of OKK's MCH series which have been proven over the years. A 3 step g...
TOSHIBA BMC-1000
A horizontal machining center for guaranteed stable powerful cutting and precision type machining. All Axes (X, Y & Z) employ linear roller guides for added rigidity and compliance of the feed sys...
TOSHIBA BMC-800
A horizontal machining center for guaranteed stable powerful cutting and precision type machining. All Axes (X, Y & Z) employ linear roller guides for added rigidity and compliance of the feed sys...
TOYODA CMH 500XL
The column moving type machine series is a new generation of horizontal machining centers. The CMH500XL comes with a CT 40, 20 HP, 8,000 RPM spindle and a 40 automatic tool changer as a standard fe...
TOYODA FA1050
The FA1050S is a heavy-duty horizontal machining center featuring a 6,000 RPM direct-drive spindle, with options of a 6,000 RPM geared-head spindle or 15,000 RPM spindle, and a rapid feedrate of 94...
TOYODA FA630S
The FA630S is a heavy-duty horizontal machining center featuring a robust column and bed, box guideways, and a powerful spindle. These features allow for powerful machining with high accuracy.
TOYODA FA800
The FA800S is a heavy-duty horizontal machining center featuring a 6,000 RPM direct-drive spindle, with options of a 6,000 RPM geared-head spindle or 15,000 RPM spindle, and a rapid feedrate of 944...
TOYODA FA800S
The FA800S is a heavy-duty horizontal machining center featuring a 6,000 RPM direct-drive spindle, with options of a 6,000 RPM geared-head spindle or 15,000 RPM spindle, and a rapid feedrate of 944...
TOYODA FH1000SX
The FH1000SX is a powerful, high-speed horizontal machining center featuring a 6,000 RPM spindle, with options of an 8,000 RPM or 15,000 RPM high-torque spindle, and a rapid feedrate of 2,126 ipm (...
TOYODA FH12500SW-I
The FH12500SW-i is a powerful, high-speed horizontal machining center featuring a 4,000RPM heavy duty gear driven quill spindle with 1,620 ft.lbs of torque. The FH12500 series platform has availabl...
TOYODA FH12500SX-I
The FH12500SX-i is a powerful, high-speed horizontal machining center featuring an upgraded heavy duty 6,000 RPM gear driven spindle with 1,620 ft.lbs of torque. The FH12500 series platform has ava...
TOYODA FH1250SW
The FH1250SW is a quill-spindle horizontal machining center designed for heavy-duty operations. This machine’s unique 3,000 RPM spindle is ideal for boring and deep drilling, allowing workpieces pr...
TOYODA FH1250SX
The FH1250SX is a powerful, high-speed horizontal machining center featuring a 6,000 RPM spindle, with options of an 8,000 RPM or 15,000 RPM high-torque spindle, and a rapid feedrate of 1,654 ipm (...
TOYODA FH1250SX 5-AXIS
The FH1250SX 5-axis is a five-axis horizontal machining center designed for complex, large part machining. It features a 15,000 RPM integral tilting spindle and rapid feedrates of 1,260 ipm (32 m/m...
TOYODA FH1600SW-I
Toyoda's FH1600SW-i horizontal machining center features the largest work envelope in its class with a maximum swing of ⌀126" (⌀3,200 mm) and a workpiece height of 83" (2,100 mm). Engineered for he...
TOYODA FH400J
The FH400J is a compact, high-speed horizontal machining center featuring a 15,000 RPM spindle, tool-to-tool cycle time of .9 seconds, and a rapid feedrate of 2,362 ipm (60 m/min).
TOYODA FH450S
The FH450S is a high-speed horizontal machining center featuring a 15,000 RPM spindle, tool-to-tool cycle time of 1.3 seconds, and a rapid feedrate of 1,968 ipm (50 m/min).
TOYODA FH5000S-I
Designed to achieve remarkable speed and production reliability, JTEKT’s FH5000 Series meets the growing demand for high metal removal rates, short cycle times and superior surface finishes. It fea...
TOYODA FH500J
The FH500J and FH500J-50 are compact, high-speed horizontal machining centers featuring a 15,000 RPM spindle, tool-to-tool cycle time of .9 seconds, and a rapid feedrate of 2,362 ipm (60 m/min). A...
TOYODA FH5500S-I
Designed to achieve remarkable speed and production reliability, JTEKT’s FH5000 Series meets the growing demand for high metal removal rates, short cycle times and superior surface finishes. It fea...
TOYODA FH5500SX-I
Designed to achieve remarkable speed and production reliability, JTEKT’s FH5000 Series meets the growing demand for high metal removal rates, short cycle times and superior surface finishes. It fea...
TOYODA FH550S
The FH550S is a high-speed horizontal machining center featuring a 15,000 RPM spindle, tool-to-tool cycle time of 2.4 seconds, and a rapid feedrate of 2,362 ipm (60 m/min). These features provide e...
TOYODA FH550SX
The FH550SX is a powerful, high-speed horizontal machining center featuring an 8,000 RPM high-torque spindle, with an option of 15,000 RPM spindle, and a rapid feedrate of 2,362 ipm (60 m/min). Thi...
TOYODA FH630SX-I
Developed best-in-class 5-axis machine for a 630 mm platform, the FH630SX-i 5-Axis is designed for complex part machining. It features an 8,000 RPM high-torque spindle, with the option of a 15,000 ...
TOYODA FH800SX-I
The FH800SX-i is a powerful, high-speed horizontal machining center featuring a 6,000 RPM spindle, with options of an 8,000 RPM or 15,000 RPM high-torque spindle, and a rapid feedrate of 2,127 ipm ...
TOYODA GS200H
Toyoda's Multitasking Horizontal Machining Center is the first in the world to equip a skiving function to a general purpose horizontal type machining center to achieve mass production of gear part...
TOYODA HMC500
A step up from a 400 mm size machine, the Wele HMC500 offers larger work envelope and superior production value for high-speed operations. The HMC500 features a 30 HP, 15,000 RPM built-in motor sty...
TOYODA TH555F4X
The TH555 F4X is a space-saving horizontal machining center for dedicated parts production. This TOP center is designed with right- and left-hand specifications to make loading and unloading of the...
TOYODA TH555I4
The TH555i4 is a space-saving horizontal machining center for dedicated parts production. This TOP center is designed with right- and left-hand specifications to make loading and unloading of the w...