Anzeigen27 Modelle
thumb

VIKING 248

Gehäuse W:24.0 in
Kammer-D:48.0 in
Gehäuse:22.0 in
1 foto
thumb

VIKING 6048-7

Gehäuse W:60.0 in
Kammer-D:48.0 in
Gehäuse:42.0 in
1 foto
thumb

VIKING 6048-7-RPJ2

Gehäuse W:60.0 in
Kammer-D:48.0 in
Gehäuse:42.0 in
1 foto
thumb

VIKING 6048-7DC

Gehäuse W:60.0 in
Kammer-D:48.0 in
Gehäuse:42.0 in
1 foto
thumb

VIKING 6048-9-3

Gehäuse W:60.0 in
Kammer-D:48.0 in
Gehäuse:42.0 in
1 foto
thumb

VIKING 6048-9-RPJ2-3

Gehäuse W:60.0 in
Kammer-D:48.0 in
Gehäuse:42.0 in
1 foto
thumb

VIKING 6048-9DC-3

Gehäuse W:60.0 in
Kammer-D:48.0 in
Gehäuse:42.0 in
1 foto
thumb

VIKING GB 2032

Gehäuse W:32.0 in
Kammer-D:20.0 in
Gehäuse:29.5 in
1 foto
thumb

VIKING GB 2032R

Gehäuse W:32.0 in
Kammer-D:20.0 in
Gehäuse:29.5 in
1 foto
thumb

VIKING GC 110

Gehäuse W:72.0 in
Kammer-D:20.0 in
1 foto
thumb

VIKING GC 110/30

Gehäuse W:72.0 in
Kammer-D:20.0 in
1 foto
thumb

VIKING GC 111

Gehäuse W:72.0 in
Kammer-D:20.0 in
1 foto
thumb

VIKING GC 112

Gehäuse W:72.0 in
Kammer-D:30.0 in
1 foto
thumb

VIKING GC 113

Gehäuse W:96.0 in
Kammer-D:36.0 in
1 foto
thumb

VIKING GC 440

The increased volume over the GC111 makes this cylinder blaster a must when processing larger volumes of cylinders. It will comfortably process 400 gas cylinders per 8 hour shift.

1 foto
thumb

VIKING GC-SR12

The highest production unit available, the GCSR12 will clean cylinders from 33” to 60” in side wall length at an approximate flow speed of 10 to 12 feet per minute achieving approximately 1000 cyli...

1 foto
thumb

VIKING GC1545

Identical to our standard spinner hanger offerings but equipped with fixtures to hold 20 pound propane cylinders, this model has two blast chambers that allow for one chamber to be loaded/unloaded ...

Gehäuse W:15.0 in
Kammer-D:15.0 in
Gehäuse:45.0 in
1 foto
thumb

VIKING GC2560

The GC420 is specifically designed to shot blast clean powder coated or wet painted 100 gallon cylinders, 420 pound cylinders, or chlorine tanks having a length of 82” or less and a diameter of 31...

Gehäuse W:82.0 in
Kammer-D:31.0 in
Gehäuse:31.0 in
1 foto
thumb

VIKING RT 9616-SP

Gehäuse W:132.0 in
Kammer-D:192.0 in
Gehäuse:264.0 in
1 foto
thumb

VIKING SH1545

The model 1545 spinner hanger offers two blast chambers that are 15” by 45”. The dual chambers allow for one chamber to be loaded/unloaded while the other chamber is being blasted. The simultaneous...

Gehäuse W:15.0 in
Kammer-D:15.0 in
Gehäuse:45.0 in
1 foto
thumb

VIKING SH2560

The increased size of the 2560 pinner hanger offers a third chamber, all three of which are 25” by 60”. Like the other spinner hanger models, this allows for one chamber to be loaded/unloaded durin...

Gehäuse W:25.0 in
Kammer-D:25.0 in
Gehäuse:60.0 in
1 foto
thumb

VIKING SH3660

The larger 36” by 60” dual chambers allow for the blasting of larger parts or bigger fixtures to hold and process a higher volume of parts. This coupled with the ability to simultaneously load/unlo...

Gehäuse W:36.0 in
Kammer-D:36.0 in
Gehäuse:60.0 in
1 foto
thumb

VIKING SH4848

The largest of our standard production models offers a 48” by 48” opening to access two chambers for the loading of large parts or bigger fixtures. As with the other models this allows for one cham...

Gehäuse W:48.0 in
Kammer-D:48.0 in
Gehäuse:48.0 in
1 foto
thumb

VIKING SR 24

The SR24 is the largest size most organizations will require. With its 24” opening it can pass rod or pipe through as small as 1” and as large as 24”. Larger applications and custom sizes are commo...

1 foto
thumb

VIKING SR 6

Gehäuse W:48.0 in
1 foto
thumb

VIKING SR12-2

Gehäuse W:48.0 in
1 foto
thumb

VIKING WH 2600

The WH 2600 is the only inline system of its kind offering high production cleaning of approximately 320 truck rims per 8-hour shift.

1 foto