BAILEIGH SN-F04-MS

If you are looking for a little more capacity from your corner notcher, try the SN-F04-MS sheet metal corner notcher from Baileigh Industrial. The SN-F04-MS is great for making perfect corners in m...

BAILEIGH SN-F09-MS

The SN-F09-MS sheet metal corner notcher from Baileigh Industrial is the perfect machine for making those perfect corners in that just are not possible with hand tools. This corner notcher has a 9...

BAILEIGH SN-F11-AN

The SN-F11-AN pneumatic corner notcher from Baileigh Industrial is the great machine for making perfect corners in sheet metal. The SN-F11-AN corner notcher has an 11 gauge mild steel capacity, so...

BAILEIGH SN-F16-FN

Notching corners is a staple of any fabrication shop. Good clean notches are the difference between a great product and a not so great one. The SN-F16-FN sheet metal corner notcher is an economic...

BAILEIGH SN-F16-HN

The SN-F16-HN manual corner notcher is a high quality cast iron sheet metal notcher perfect for any garage or sheet metal shop. The cutting angle is fixed at 90 degrees and can notch up to 6" x 6" ...

BAILEIGH SN-V04-MS

Ever have odd angles that you need to notch out of sheet metal, something that will look totally whack when finished if not done right? Enter the SN-V04-MS; this great machine is a 220 volt three ...

BOSCHERT K30-120 MINI S

BOSCHERT LB12/4

BOSCHERT LITE

BOSCHERT PN

8-7/8" x 8-7/8" x 5/32" BOSCHERT POWER NOTCHER MODEL PN4         S/N 1969         Year 1993   Capacity .........

JET HN-16T

JET’s high quality cast iron sheet metal notcher is ideal or any garage or sheet metal shop. It's compact design makes it perfect for on-site use. The cutting angle is fixed at ninety degrees and c...

LOCKFORMER ROTO NOTCHER

Dove-tail notch out of 24 to 30 gauge galvanized — in only one pass! Just cut to width and length or use scrap. This machine uses either 3" or 6" width blanks with simple adjustment.

LOCKFORMER SPEEDNOTCH 16

Speednotch allows you to gang-notch sheet metal hydraulically up to 600% faster than by hand, without layout or scribing. It’s the perfect tool for preparing ductwork to receive bar, slip or “S” a...

LOCKFORMER TDC NOTCHER

TDC NOTCHER comes standard with 5 notching heads. The Lockformer TDC NOTCHER will gang notch duct blanks as much as 6 times faster than notching by hand. The Hydraulic powered notch units have in...

RAMS 2001

Notch drive cleats before or after they are formed. Mounts readily to a bench. Easy spring loaded push handle. Easy to change hardened shear blades.

SCOTCHMAN AL1

The AL1 can be used to notch 3/4", 1" and 1-1/4" Schedule 40 Pipe. This hand-operated machine can easily be wall mounted.

SCOTCHMAN AL3

The AL3 can be used to notch 1-1/4" and 1-1/2" Schedule 40 Pipe. This machine can easily be wall mounted.

SCOTCHMAN ALU

The ALU can be used to notch a sink outflow in pipes with an external diameter of 1.0630" to 2.40158".

TIN KNOCKER 1655

A heavy versatile tool capable of not only notching to capacity but also shearing and piercing operations in lighter gauge. Of heavy cast iron and fabricated construction, this table top machine co...

TIN KNOCKER EDGE

Round surface edges for collars and end caps.