AMINO DSP 100Y
(1) Used 112 Ton Amino Hydraulic Down Acting Spotting Press
BRITISH CLEARING F-4350-108
350 Ton British Clearing F-4350-108 Straight Side Press, Air Clutch, Custom Stop Locks, Back-Guard, Updated Electrics Installed W/ PLC
CLASS 100 CLASS 100
100 Ton Die Spotting Try-out press class 100, 1970s
CLEARING TF-41500-180
1500 Ton Clearing TF-41500-180 Double Action Tryout Press, 1960
DIEFFENBACHER PU5 330A
Capacity 300 Ton Table size 1.500 x 1.500 mm Adjustable stroke 500 - 1.000 mm Piston ø 400 mm Distance table -> ram Minimum: 500 mm Maximal: 1.500 mm Machine height 4.000 mm Under ground 1.0...
HYDRAULIC HYDRAULIC
(1) Used 100 Ton Hydraulic Die Spotting Press
LCH LD-200-2000-1500
Model: LDST-200-2000-1500 Frame: O Type Capacity: 20 - 200 ton Stroke: 1600 mm / 63" Daylight: 1600 mm / 63" Bolster Area: 2000 x 1500 mm / 78.74" x 59" Slide Area: 2000 x 1500 mm / 78.74" x 59" Sl...
LCH LDSMA-700-3000-2000
LCH Die Spotting Press 700 Ton ECO Servo Hydraulic Model LDSMA-700-3000-2000
LIN CHENG CCH-125
Used Lin Cheng(M.I.T) Hydraulic horizontal die spotting machine (for plastic molds) Model: CCH-125 Our website: https://www.ryokuta.com/en/products/cch-125
REIS REIS TUS-90
REIS TUS 115 OK
PRELIMINARY SPECIFICATIONS REIS 4 POST HYDRAULIC SPOTTING PRESS WITH SHUTTLE TABLE TILT DOWN RAM, TILT UP SHUTTLE BOLSTER (LEFT TILT & RIGHT TILT) MODEL TUS 115 OK S/N 971 YEAR 1977 FLOOR S...
REIS TUS 400-250
Little used spotting press in very good condition.
REIS TUS 80 OK-50
(1) Used 50 Ton Reis Mold Spotting and Try-out Press
REIS TUS 90 OK
(1) Used 90 Ton Reis Hydraulic 4 Post Spotting Press
REIS TUS-160-100
(1) Used REIS TUS-160-100 4-Post Hydraulic Spotting Press
REIS TUS125 OK
(1) Used 112 Ton Reis Hydraulic Die Spotting Press
REIS TUS90OK40
Work load 7000 Kg Rotation table load 3500 Kg Table height over floor 665 mm Upper mould half can be freely swiveled out up to 180 Gr. Lower mold half can be swiveled hydraulic using push ...
REIS TUS90OK40
Work load 7000 Kg Rotation table load 3500 Kg Table height over floor 665 mm Upper mould half can be freely swiveled out up to 180 Gr. Lower mold half can be swiveled hydraulic using push ...
SANKI SDP1310-100TD
12,000 # Die Capacity, Split Mold, Rolls Out Lower 1/2, Inverts Upper 1/2 of Mold `180 degrees for polishing and repair. Wax Injection with 100 Ton Clamping force for Tryout.
SANKI SPD1310-100TD
(1) Used 100 Ton Sanki Hydraulic Spotting Press