AAF CY44-40
The Cyclone® can be used in almost any application that generates dust particles greater than 20 microns in diameter. Use the Cyclone® as your primary collector with or without the optional after-f...
AAF CY44-50
The Cyclone® can be used in almost any application that generates dust particles greater than 20 microns in diameter. Use the Cyclone® as your primary collector with or without the optional after-f...
ACT 2-12
Specifications: 12 cartridge down flow dust collector 3,048 sq. ft. filter media Rated for up to 10,000 CFM ACT Nano-Elite nano-fiber filters Industry leading MERV 15 efficienc...
ACT 2-16
Specifications: 16 cartridge down flow dust collector 4,064 sq. ft. filter media Rated for up to 13,000 CFM ACT Nano-Elite nano-fiber filters Industry leading MERV 15 efficienc...
ACT 3-12
Specifications: 12 cartridge down flow dust collector 3,048 sq. ft. filter media Rated for up to 10,000 CFM ACT Nano-Elite nano-fiber filters Industry leading MERV 15 efficienc...
ACT 3-18
Specifications: 18 cartridge down flow dust collector 4,572 sq. ft. filter media Rated for up to 14,000 CFM ACT Nano-Elite nano-fiber filters Industry leading MERV 15 efficienc...
ACT 4-16
AGET FH58-2
AGET FILTERKOP shaker-type filter units are designed to improve air quality and provide a safer work environment by removing fine dust particles from high volume exhaust airstreams. Often used afte...
AGET FH58-3
AGET FILTERKOP shaker-type filter units are designed to improve air quality and provide a safer work environment by removing fine dust particles from high volume exhaust airstreams. Often used afte...
AIR CONTROL TECHNOLOGY RRB-11/168-10
AIR CONTROL TECHNOLOGY RSB-10/102-10
AIR CONTROL TECHNOLOGY RSB-10/102-12
AIR CONTROL TECHNOLOGY SPB-1108
CAMFIL APC HANDTE VENTURI 21.0
The Handte Vortex and Handte Venturi wet scrubber systems provide high-efficiency and low-maintenance removal of dusts from the workplace.
CAMFIL APC HANDTE VORTEX 21
The Handte Vortex and Handte Venturi wet scrubber systems provide high-efficiency and low-maintenance removal of dusts from the workplace.
CLEAN AIR AMERICA SC18
COMCO DC2000
The DC2000 is designed to connect to the back of our WorkStation through a four-inch flexible duct. The compact size of the DC2000 allows it to be located next to the bench on which the WorkStatio...
DENRAY MACHINE 85120
Denray's 85120 model comes equipped with a 7.5 HP motor, developing a CFM of 10,000, to a maximum width of 14' (widths over 14' require multiple power units). Dust Booths work great for a larger ap...
DONALDSON TORIT CYCLONE 44-40
DONALDSON TORIT CYCLONE 44-50
DONALDSON TORIT DF-4-16
DONALDSON TORIT DFO3-18
DONALDSON TORIT DFT 2-16
DONALDSON TORIT DFT 4-16
DONALDSON TORIT ECB-3
DONALDSON TORIT UNIMASTER 750
EXTREMA DC-3250S
IBIS MAC-100
The Multi Application Collector is applicable to disposable hygienic product trim, textile dry face finishing machines such as shears, nappers, etc. The MAC is also used in plastic film, tissue, fi...
IBIS TC-5
An Ibis Trim Collector is a passive air & material separation system. This collector can handle a wide variety of production line waste streams, ranging in size from whole products to fiber. The ma...