FOREMOST HMG-1116
The Hot Melt Model HMG-1116 is intended for processing hot thermoplastic directly from the extruder die without pre-cooling. Hot blow molding parisons, wire and cable hot melt, as well as compoundi...
FOREMOST HSFG-1116
FOREMOST HSFG-1124
FOREMOST HSFG-1132
Our High Shear Film and Sheet Granulators are suitable for a wide range of applications including grinding sheet, film, roll stock, edge trim, and slabs. Specific models are available for each type...
FOREMOST HSFG-1632
FOREMOST MS14
FOREMOST MS28
FOREMOST QG-1010
FOREMOST QG-1410
The Foremost QG-1410, with 40% more throat area than the Model 1010, retains that model’s slim profile, with the same two foot width. Along with the usual sprues and runners, this size can accommod...
FOREMOST QG-1814
The Foremost QG-1814, only a few inches wider than the smaller models in the QG Series, has a throat area at east 80% greater than competitive models of similar width. This is large enough to accom...
FOREMOST S-45
This line of high capacity, heavy duty granulators can accommodate heavy extruded or cast sheet, or thermoforming scrap. Additionally, they are well suited for batch granulator of scrap parts, spru...
FOREMOST s30
FOREMOST S3E-2
Foremost’s High Shear Granulator has been field-proven for over 40 years, both alone and as part of complete inline film recycling systems. Intended for all types of film and other soft materials, ...
FOREMOST SCG-1116
FOREMOST SCG-1132
FOREMOST SHD-6
FOREMOST SMBWB-4
FOREMOST SW-0936
Foremost’s SW-0936 Low Profile Sheet & Web Granulators process thermoform scrap including skeletal scrap, sheet web, expanded polystyrene, high impact polystyrene, HDPE, ABS, PET, and CPET. Featuri...
GETECHA GRS 180
GETECHA GRS 300
GETECHA RS 2002
GETECHA RS 2004
GETECHA RS 2006
GETECHA RS 2009
GETECHA RS 2012
GETECHA RS 3004
GETECHA RS 3006
GETECHA RS 3009
GETECHA RS 3015
GETECHA RS 352
GETECHA RS 353
GETECHA RS 354
GETECHA RS 355
GETECHA RS 4506
GETECHA RS 4509
GETECHA RS 4512
GETECHA RS 4515
GETECHA RS 8012
GETECHA RS 8015
GETECHA SRS 100-A4
GLOBAL DEVELOPMENT INTERNATIONAL GRANULATOR
The design from the 1930's is still well received for cutting of materials using a rotating knife assembly in an enclosed chamber. The use of screens for retention of product in the chamber allows ...
