DSME Trenton LtdPastAuction - On-Location (w/ Webcast)

ID #
10689
Description
Late Model $75M Wind Tower Manufacturing Operation! This Is An Exceptional Once In A Lifetime Opportunity Not To Be Missed!!!
Type
On-Location (w/ Webcast)
Starts At
11/14/18 9:30 AM AST
Ends At
11/15/18 5:00 PM AST
Inspection
11/12/18 8:00 AM AST – 11/13/18 5:00 PM AST
Monday, November 12 & Tuesday, November 13 from 8:00 A.M. to 5:00 P.M
Location
34 Power Plant Rd
Trenton, Nova Scotia B0K 1X0
Canada
Corporate Assets Inc.

This Auction Is No Longer Active

Receive Auctions By Email

You now can receive a daily email with all promoted auction events. Simply visit your email settings to set up your update.

ID #
10689
Description
Late Model $75M Wind Tower Manufacturing Operation! This Is An Exceptional Once In A Lifetime Opportunity Not To Be Missed!!!
Type
On-Location (w/ Webcast)
Starts At
11/14/18 9:30 AM AST
Ends At
11/15/18 5:00 PM AST
Inspection
11/12/18 8:00 AM AST – 11/13/18 5:00 PM AST
Monday, November 12 & Tuesday, November 13 from 8:00 A.M. to 5:00 P.M
Location
34 Power Plant Rd
Trenton, Nova Scotia B0K 1X0
Canada

Summary of Items

It is with great pleasure that we announce our recent acquisition of the former assets of DSME Trenton, a world renown wind tower manufacturing facility established in 2011 at a cost of over $75,000,000 Dollars! This facility was equipped with state of the art and late model equipment, resulting in exceptional capacities for manufacturing in both the wind tower & heavy fabricating sectors. With only 35 wind towers manufactured from the site, the facility has been very lightly used and extremely well cared for over the years. Most of the major assets have little to no hours of usage, and this is an exceptional opportunity to acquire late model machinery, to either expand current capacities or break into a new market that is thriving across the globe! For further information about this opportunity please contact Ryan Haas at 416-962-9600, and a brief summary of the facility’s equipment is as follows:

WHEELABRATOR (2014 - $1M USD+ REPLACEMENT COST) 6 wheel top & bottom plate blast system w/ 30HP wheels, reclamation unit etc.; DAVI (2011) MCB-3076WT, 3” x 10’ 4-roll hydraulic plate bending rolls w/ overhead support and in-feed table; DAVI (2011) MCB-3070WT, 2 ¾” x 10’ 4-roll hydraulic plate bending rolls w/ overhead support and in-feed table; DAVI (2011) MAV-3072, 2 ½” x 10’ 3-roll hydraulic plate bending rolls; (2) MESSER (2011) TMC4510, high definition & large capacity CNC plasma cutting tables; (8) Large sub-arc welding systems with 2011 traveling car positioners from 3- 9 meter capacity, 2012 powered tank roll sets up to 100 ton capacity, all fitted with LINCOLN (2011) DC-1000 dual wire power supplies, flux recovery systems, PLC controls etc.; Assortment of large gantry type sub-arc welding cells w/ LINCOLN DC-1000 power supplies; (100+) powered driver and idler tank roll sets from 20 ton – 120 ton capacity; (2) COLMET (2011) 130’ long, pass through paint booths w/ side draft exhaust systems; CUSTOM FABRICATION shot blast booth w/ reclamation system; MI-JACK (2012 - $500K+ USD NEW) MJ110, mobile outdoor straddle lift; MUNCK (2013) 50 ton, double girder stationary gantry crane system; (6) ZENAR (LATE MODEL & RADIO CONTROLLED) 40 ton x 90’, double girder bridge cranes; ZENAR 40 ton x 90’, outdoor double girder bridge crane system w/ freestanding supports & runways; MUNCK 25 ton x 110’, double girder bridge crane; (10+) Assorted bridge cranes from 5 ton – 25 ton capacity; (25+) LINCOLN (2011 - $25K USD NEW EACH) DC-1000, welding power supplies; (100+) MILLER MIG & TIG welders; (2) THERMITRON spray welders; (4) GULLCO KBM 28V, plate bevellers; (2) INGERSOLL RAND (2015) 200HP air compressors w/ dryers; (2) INGERSOLL RAND (2015) 125HP air compressors w/ dryers; (2) GARDNER DENVER 50HP air compressors w/ dryers; (3) GE (REBUILT) locomotives; (15+) flat deck rail cars; HAULOTTE HA61, boom lift; (2) JLG 660ST, boom lifts; CATERPILLAR 350KW, back-up generator; OLYMPIAN 100KW, back-up generator; HUGE ASSORTMENT OF paint equipment, (2) QUIET CUBE industrial vacuums, TORIT dust collectors, heavy capacity forklifts, bobcats, scissor lifts, lifting equipment & accessories, trucks & trailers, complete machining & fabricating departments, wood working department, HUGE spare parts inventory, necessary electrical support assets, & MUCH MORE!

This is an exceptional once in a lifetime opportunity not to be missed!

**Sale Starts 9:30 AM AST both days

FEATURING -

CNC PLATE CUTTING MACHINES

(2) MESSER TMC4510 (Purchased NEW in 2011 for $1M USD) bridge type CNC plasma & oxy-acetylene plate cutting system with continuous load & cut capability, BECKHOFF MESSER CNC CP7002-1070 15" touch screen CNC controls, 118” max work piece width capacity, 150’ max. working length each bridge, 3.15” max work piece thickness capacity, 57.67 IPM cutting speed @ 1.18” plate thickness; system consisting of (2) MESSER TMC4510 independent travelling gantry bridges with BECKHOFF MESSER CNC CP7002-1070 15" stand alone touch screen CNC controls, SURE STOP collision protection, powder markers, (1) high definition plasma head each machine , (1) oxy-acetylene head each machine , 201' bridge travel, 136" head cross travel, 14.5" head vertical stroke, double side CNC synchronized rack & pinion longitudinal drive with 3.93-1181 IPM variable traverse speed; 220'L x 10.5'W sectional down draft cutting table; (2) HYPERTHERM HPR400XD high definition plasma power sources with chillers; (2) DONALDSON MESSER DFT3-24 25 hp downdraft cartridge type dust collect systems with (12) canister filters; (2) MESSER 4291.3725 heavy duty spark arrestors, s/n TMC45110P-11-5452
HYPERTHERM H2P2-0110 oxy-acetylene CNC cantilever type oxy-acetylene cutting table with HYPERTHERM EDGE CNC control, (8) oxy-acetylene torch heads, travels X-375", Y-98", Z-10", tilt and bevel heads, 384"x 120" dry type table, s/n 1100001515
ESAB (2004) AVENGER-2 SPECIAL CNC gantry type plasma plate cutting machine with ESAB ATAS CNC control, 276" head cross travel, 14" head vertical stroke, (2) ESAB ESP-600C plasma power sources with chiller, (not in service), s/n 0560936746R

HORIZONTAL PLATE SHOT BLAST SYSTEM

WHEELABRATOR (Purchased NEW in 2014 for $795K CAD) PSM-1018-6-30 (6) wheel top & bottom thru type plate and structural shot blast machine with ALLEN BRADLEY COMPACT LOGIX L24E PLC control with 8" color HMI touch screen, 126" Wide x 3" thick cleaning envelope in current configuration, 135" x 18" aperture, 2-10 fpm cleaning rate, (6) 14" diameter EZEFIT direct drive, bi directional, 30 HP blast wheels; traverse wire belt brush-off; MANGANESE cabinet and shed plates; auger type media recovery; bucket elevator; hopper feeders; 50' in feed roll conveyor with 1500 LBS/FT capacity, 24" roll spacing, slave chain driven; 50' out feed roll conveyor with 1500 LBS/FT capacity, 24" roll spacing, slave chain driven; (3) AIRFORCE ONE high pressure blow off systems with nozzles; Cincinnati Fan HDBI – 300 CJP 36 cyclonic type dust collector with 15,000 CFM capacity and 30 HP blower; ONLY 127 HRS recorded on meter at the time of listing, s/n 600550

PROGRESSIVE GROWING TYPE WIND TURBINE TOWER MANUFACTURING LINE
(Purchased NEW in 2011 for $3.5M USD)

JONGHAP - LINCOLN ELECTRIC LW-01 (2011) MA-42-02 Longitudinal In/Out Side Sub Arc welding system consisting of LONGI LW-01 fixed base, rotary column welding manipulator with MITSUBISHI GOT-1000 touch screen PLC control, 190" boom vertical travel with 47 IPM constant vertical travel speed, 165" boom horizontal travel with 9.5-98.6 IPM variable horizontal travel speed, 660 LBS working end load capacity, 90 degree swing bracket, +/- 180 degree manual column rotation; LINCOLN ELECTRIC sub arc welding system with (2) LINCOLN ELECTRIC AC/DC 1000SD welding power sources, Dual Wire Feed with (2) LINCOLN ELECTRIC MAXSA10 digital programmable controls, CYCLONIC type flux recovery system; ROMAR KUMKANG (2012) HGK40, 40 TON capacity driver & idler turning roll sets with 17.70" urethane lined rolls, bi directional variable speed control with 0.1-1.03 RPM variable speed, 5.5-57 IPM, multi position driver and idler adjustment with conical turning capability, pendant and wireless remote controls, 600V/3PH/60Hz, s/n 2011012002
JONGHAP - LINCOLN ELECTRIC LW-02 (2011) MA-42-03 Longitudinal In/Out Side Sub Arc welding system consisting of LONGI LW-02 Traveling Car, rotary column welding manipulator with MITSUBISHI GOT-1000 touch screen PLC control, 190" boom vertical travel with 47 IPM constant vertical travel speed, 165" boom horizontal travel with 9.5-98.6 IPM variable horizontal travel speed, 660 LBS working end load capacity, 90 degree swing bracket, +/- 180 degree manual column rotation, rail mounted left to right traveling column with 260" travel; LINCOLN ELECTRIC sub arc welding system with (2) LINCOLN ELECTRIC AC/DC 1000SD welding power sources, Dual Wire Feed with (2) LINCOLN ELECTRIC MAXSA10 digital programmable controls; CYCLONIC type flux recovery system; (2) JONGHAP (2011) STR-40/20, 40 TON capacity driver & idler turning roll sets with 17.70" urethane lined rolls, bi directional variable speed control with 0.1-1.03 RPM variable speed, 5.5-57 IPM, multi position driver and idler adjustment with conical turning capability, 600V/3PH/60Hz, s/n 2011012003
JONGHAP - LINCOLN ELECTRIC LW-03 (2011) MA-42-01 Longitudinal In/Out Side Sub Arc consisting of LONGI LW-03 fixed base, rotary column welding manipulator with MITSUBISHI GOT-1000 touch screen PLC control, 190" boom vertical travel with 47 IPM constant vertical travel speed, 165" boom horizontal travel with 9.5-98.6 IPM variable horizontal travel speed, 660 LBS working end load capacity, 90 degree swing bracket, +/- 180 degree manual column rotation; LINCOLN ELECTRIC sub arc welding system with (2) LINCOLN ELECTRIC AC/DC 1000SD welding power sources, Dual Wire Feed with (2) LINCOLN ELECTRIC MAXSA10 digital programmable controls; CYCLONIC type flux recovery system; JONGHAP (2011) STR-40/20, 40 TON capacity driver & idler turning roll set with 17.70" urethane lined rolls, bi directional variable speed control with 0.1-1.03 RPM variable speed, 5.5-57 IPM, multi position driver and idler adjustment with conical turning capability, 600V/3PH/60Hz, s/n 2011012001
JONGHAP - LINCOLN ELECTRIC FW-01 (2011) MA-42-06(CAR) car type Circumferential Outside Sub Arc welding system consisting of LONGI FW-01 traveling, rotary column welding manipulator with MITSUBISHI GOT-1000 touch screen PLC control, 180" boom vertical travel with 47 IPM constant vertical travel speed, 79" boom horizontal travel in current limit switch configuration, existing pre-set expandable to max 168" horizontal travel with 9.5-98.6 IPM variable horizontal travel speed, 660 LBS working end load capacity, 90 degree swing bracket, +/- 180 degree manual column rotation; rail mounted left to right traveling column with 260" travel; LINCOLN ELECTRIC sub arc welding system with (2) LINCOLN ELECTRIC AC/DC 1000SD welding power sources, Dual Wire Feed with (2) LINCOLN ELECTRIC MAXSA10 digital programmable controls; CYCLONIC type flux recovery system; (2) JONGHAP (2011) STR-80/40 80 TON capacity driver & idler turning roll sets with 17.70" urethane lined rolls, bi directional variable speed control with 0.1-0.95 RPM variable speed, 5.27-52.75 IPM, multi position driver and idler adjustment with conical turning capability, 600V/3PH/60Hz, s/n 2011012006
JONGHAP - LINCOLN ELECTRIC (2011) MA-42-05 (FLANGE) Longitudinal In/Out Side Sub Arc welding system consisting of JONGHAP GL-01 traveling, rotary column welding manipulator with MITSUBISHI GOT-1000 touch screen PLC control, 190" boom vertical travel with 47 IPM constant vertical travel speed, 165" boom horizontal travel with 9.5-98.6 IPM variable horizontal travel speed, 660 LBS working end load capacity, 90 degree swing bracket, +/- 180 degree manual column rotation, rail mounted front to back traveling column with 195" travel; LINCOLN ELECTRIC sub arc welding system with (2) LINCOLN ELECTRIC AC/DC 1000SD welding power sources, Dual Wire Feed with (2) LINCOLN ELECTRIC MAXSA10 digital programmable controls; CYCLONIC type flux recovery system; (2) JONGHAP (2011) twin parallel running driver & idler turning roll sets with 17.70" urethane lined rolls, bi directional variable speed control multi position driver and idler adjustment with conical turning capability, 600V/3PH/60Hz, s/n 2011012005
JONGHAP - LINCOLN ELECTRIC (2011) MA-42-04 (FLANGE) CNC sub arc IN/OUT sub arc welding system consisting of JONGHAP GL-02 traveling, rotary column welding manipulator with MITSUBISHI GOT-1000 touch screen PLC control, 190" boom vertical travel with 47 IPM constant vertical travel speed, 165" boom horizontal travel with 9.5-98.6 IPM variable horizontal travel speed, 660 LBS working end load capacity, 90 degree swing bracket, +/- 180 degree manual column rotation, rail mounted front to back traveling column with 195" travel; LINCOLN ELECTRIC sub arc welding system with (2) LINCOLN ELECTRIC AC/DC 1000SD welding power sources, Dual Wire Feed with (2) LINCOLN ELECTRIC MAXSA10 digital programmable controls; CYCLONIC type flux recovery system; (2) JONGHAP (2011) twin parallel running driver & idler turning roll sets with 17.70" urethane lined rolls, bi directional variable speed control multi position driver and idler adjustment with conical turning capability, 600V/3PH/60Hz, s/n 2011012004
JONGHAP - LINCOLN ELECTRIC GL-03 (2011) MA-75-01 CIRC/IN sub arc welding system consisting of JONGHAP GL-03 fixed base, rotary column welding manipulator with MITSUBISHI GOT-1000 touch screen PLC control, 185" boom vertical travel with 33 IPM constant vertical travel speed, 300" boom horizontal travel with 4.6-46.45 IPM variable horizontal travel speed, 660 LBS working end load capacity, 90 degree swing bracket, +/- 180 degree manual column rotation; LINCOLN ELECTRIC sub arc welding system with (2) LINCOLN ELECTRIC AC/DC 1000SD welding power sources, Dual Wire Feed with (2) LINCOLN ELECTRIC MAXSA10 digital programmable controls; CYCLONIC type flux recovery system; JONGHAP (2011) STR-100/50, 100 TON capacity driver & idler turning roll set with 17.70" urethane lined rolls, bi directional variable speed control with 0.1-1.03 RPM variable speed, 5.5-57 IPM, multi position driver and idler adjustment with conical turning capability; 76.5' driver travel; stationary hydraulic adjustable fit-up steady rest, 600V/3PH/60Hz, s/n 2011012007
JONGHAP - LINCOLN ELECTRIC GL-04 (2011) MA-75-03 CIRC/IN sub arc welding system consisting of JONGHAP GL-04 fixed base, rotary column welding manipulator with MITSUBISHI GOT-1000 touch screen PLC control, 185" boom vertical travel with 33 IPM constant vertical travel speed, 300" boom horizontal travel with 4.6-46.45 IPM variable horizontal travel speed, 660 LBS working end load capacity, 90 degree swing bracket, +/- 180 degree manual column rotation; LINCOLN ELECTRIC sub arc welding system with (2) LINCOLN ELECTRIC AC/DC 1000SD welding power sources, Dual Wire Feed with (2) LINCOLN ELECTRIC MAXSA10 digital programmable controls; CYCLONIC type flux recovery system; JONGHAP (2011) STR-100/50, 100 TON capacity driver & idler turning roll set with 17.70" urethane lined rolls, bi directional variable speed control with 0.1-1.03 RPM variable speed, 5.5-57 IPM, multi position driver and idler adjustment with conical turning capability, driver travels 76.5', stationary hydraulic adjustable fit-up steady rest, 600V/3PH/60Hz, s/n 2011012009
JONGHAP - LINCOLN ELECTRIC GW-01 (2011) GANTRY-01 traveling gantry type OUTSIDE sub arc welding system consisting of JONGHAP GW-01 traveling gantry type welding manipulator with MITSUBISHI GOT-1000 touch screen PLC control, 118.11”-177.16” work piece O.D. capacity, 185” max flange O.D, 0.47”-2.75” wall thickness capacity, 75 TON max work piece weight capacity, 133.85" cross rail vertical travel, 47.24 IPM cross rail vertical speed, 271" max distance between uprights, rail mounted gantry with 250' horizontal travel, 78.74-393.70 IPM gantry travel speeds; LINCOLN ELECTRIC sub arc welding system with 7.87” torch head vertical travel, 5.90” torch head left-right horizontal travel, 7.84” torch head front to back horizontal travel, (2) LINCOLN ELECTRIC AC/DC 1000SD welding power sources, Dual Wire Feed with (2) LINCOLN ELECTRIC MAXSA10 digital programmable controls; CYCLONIC type flux recovery system; (4) JONGHAP (2011) STR-100/50, 100 TON capacity driver & idler turning roll sets with 17.70" urethane lined rolls, bi directional variable speed control with 0.1-1.03 RPM variable speed, 5.5-57 IPM, rail mounted with manual positioning, multi position driver and idler adjustment with conical turning capability, 600V/3PH/60Hz, hydraulic adjustable stationary steady rest, 600V/3PH/60Hz, s/n 2011012012
JONGHAP - LINCOLN ELECTRIC GW-02 (2011) GANTRY-02 traveling gantry type OUTSIDE sub arc welding system consisting of JONGHAP GW-02 traveling gantry type welding manipulator with MITSUBISHI GOT-1000 touch screen PLC control, 118.11”-177.16” work piece O.D. capacity, 185” max flange O.D, 0.47”-2.75” wall thickness capacity, 75 TON max work piece weight capacity, 133.85" cross rail vertical travel, 47.24 IPM cross rail vertical speed, 271" max distance between uprights, rail mounted gantry with 250' horizontal travel, 78.74-393.70 IPM gantry travel speeds; LINCOLN ELECTRIC sub arc welding system with 7.87” torch head vertical travel, 5.90” torch head left-right horizontal travel, 7.84” torch head front to back horizontal travel, (2) LINCOLN ELECTRIC AC/DC 1000SD welding power sources, Dual Wire Feed with (2) LINCOLN ELECTRIC MAXSA10 digital programmable controls; CYCLONIC type flux recovery system; (4) JONGHAP (2011) STR-100/50, 100 TON capacity driver & idler turning roll sets with 17.70" urethane lined rolls, bi directional variable speed control with 0.1-1.03 RPM variable speed, 5.5-57 IPM, rail mounted with manual positioning, multi position driver and idler adjustment with conical turning capability, 600V/3PH/60Hz, hydraulic adjustable stationary steady rest, 600V/3PH/60Hz, s/n 2011012013
JONGHAP - DW (2011) manual door assembly and welding station consisting of (4) JONGHAP (2011) traveling base tank turning rolls with 16" rubber lined wheels; catwalk operator steel mezzanine with stairs; (4) monorail traveling beams with (2) ARO 2 TON capacity pneumatic chain hoist per beam; (6) MILLER DELTAWELD 452 digital MIG welders with wire feeders; (5) LINCOLN ELECTRIC IDEALRC DC 600 MIG welders with wire feed, steel catwalk with lights, power plugs and integration, s/n n/a

CNC HYDRAULIC HEAVY PLATE BENDING ROLLS

DAVI PROMAU (Purchased NEW in 2011 for $ 738K USD) MCB 3076WT CNC 4-roll double pinch, full hydraulic roll bending machine with DAVI LEONARDO CNC touch screen control, 29.92” top roll diameter, surface hardened rolls, 3.49” x 120” rolling max., 2.75” x 120” pre-bending, , 570” max plate length, , 177.16” max rolled work piece diameter, 20 TON max work piece weight, 12 TON Hyd. Overhead support , 10 TON Hyd. side support with pusher, 6 TON Hyd. side support, hydraulic end cap, 220 HP main hydraulic drive, hydraulic actuated side wing roller supports, 46' x 10' hydraulic scissor lift type powered in feed roll conveyor table with 20 TON capacity, 600V/3PH/60Hz, s/n 21140003
DAVI PROMAU (Purchased NEW in 2011 for $ 586K USD) MCB3070WT N1 CNC 4-roll, double pinch, full hydraulic roll bending machine with DAVI LEONARDO CNC touch screen control, 27.56” top roll diameter, surface hardened rolls, 2” x 120” pre-bend capacity, , 570” max plate length, 0.39” to 2.16” plate thickness capacity, 177.16” max rolled work piece diameter, 20 TON max work piece weight, 12 TON Hyd. Overhead support, 10 TON Hyd. side support with pusher, 6 TON Hyd. side support, hydraulic end cap, 150 HP main hydraulic drive, hydraulic actuated side wing roller supports, 46' x 10' hydraulic scissor lift type powered in feed roll conveyor table with 20 TON capacity, 600V/3PH/60Hz, s/n 21140002
DAVI PROMAU (Purchased NEW in 2011 for $ 525K USD) MAVI 3072 CNC 3-roll variable axis, full hydraulic roll bending machine with DAVI SMART BASIC CNC control, 28.34” top roll diameter, surface hardened rolls, 2.27” x 120” Pre-Bend Capacity, 3.93”-120” plate width capacity, 570” max plate length, 0.39” to 2.16” plate thickness capacity, 177.16” max rolled work piece diameter, 20 TON max work piece weight, 12 TON Hyd. Overhead support, 220 180 HP main hydraulic drive, , 600V/3PH/60Hz, s/n 21130002

PORTABLE ID/OD CIRCULAR MILLING MACHINE

CLIMAX (Purchased NEW in 2012 for $ 225K USD) CM6200 portable ID/OD circular milling machine with MITSUBISHI GOT-1000 travel case mounted PLC control, 78.9"-177.2" ID face mounting range, 73.5"-199" ID milling diameter range, 69.5"- 189.0" single point ID machining diameter range, 73.5"-189.0" ID grinding diameter range, 135.6" min swing diameter, 197" max swing diameter, 24" radial tool slide travel, 8" axial milling tool head travel, 98.4"-209.9" OD mounting range, 69.5"-184" OD milling diameter range, 69.5"-189.0" single point OD machining diameter range, 73.5"-189.0" grinding diameter range, #50 taper hydraulic driven spindle with 25 HP power-pack, grinding attachment, associated leveling and chucking pads, complement of #50 taper tooling, s/n 1202024T

PLATE BEVELLERS

(2) GULLCO (2011) KBM-28 heavy duty portable top side plate edge beveling machines with 5/16" to 2" plate capacity, speeds to 6.5'/min capacity, self-aligning hydraulic spring-loaded caster wheel undercarriage, s/n 29993-1; 29993-2
(2) GULLCO (2011) KBM-28U heavy duty portable underside plate edge beveling machines with 5/16" to 2" plate capacity, speeds to 6.5'/min capacity, self aligning hydraulic spring-loaded caster wheel undercarriage, s/n 29994-1; 29994-2

WELDERS

(20) LINCOLN ELECTRIC (Purchased 2011 for $ 45K USD each) POWER WAVE AC/DC 1000 SD SUBARC WELDERS iARC digital controlled Input Power 380/460/575/3/50/60, Rated Output 1000A/44V/100% s/n: N/A
(2) PRECISION ARC (2015) THERMION push type precision spray arc metalizing system with 1/8" to 3/16" aluminum wire capacity with 63 LBS/HR spray rate @ 75% efficiency, 1/8" to 3/16" 85/15 wire capacity with 150 LBS/HR spray rate @ 70% efficiency, 1/8" to 3/16" zinc wire capacity with 220 LBS/HR spray rate @ 65% efficiency, MILLER DELTAWELD 652 digital power source; s/n 54221; n/a
ARCAIR N7500 portable air-carbon/arc gouging and grooving system with 5/16" to 3/4" gouging electrode capacity, s/n CN1344000291
LINCOLN ELECTRIC compact sub arc welding system with (2) LINCOLN ELECTRIC AC/DC 1000SD welding power sources, (2) LINCOLN ELECTRIC MAXSA10 digital programmable controls, CYCLONIC type flux recovery system, s/n n/a
THERMAL DYNAMICS PAKMASTER 150XL heavy duty portable plasma cutter with cables and gun, s/n n/a
MILLER INVISION 456P digital MIG welder with cables and gun, s/n n/a
LINCOLN IDEALARC DC600 MIG welder with MILLER wire feeder, cables and gun, s/n n/a
LINCOLN IDEALARC DC600 MIG welder with MILLER wire feeder, cables and gun, s/n n/a
(3) LINCOLN DC400 MIG welders with LINCOLN wire feeders, cables and gun, s/n n/a
(5) MILLER DELTAWELD 452 MIG welder with MILLER wire feeder, cables and gun, s/n n/a
(2) LINCOLN ELECTRIC IDEALARC CV 400 MIG welders with wire feeders, s/n n/a
LINCOLN ELECTRIC IDEALARC DC-600 MIG welder with wire feeder and gun, s/n n/a
MILLER BIG BLUE 402P CC/CV-DC diesel welder generator with 300 Amp welding power supply, 12,000 WATT, 120/240V generator, approx 1362 HRS recorded on meter at the time of listing, s/n LA085012
(2) RED-D-ARC D300K 3PLUS10 tow behind diesel welder generators with 250 Amp welding power supply, 10,000 WATT, 120/240V generator, s/n 806; 869
(19) LINCOLN ELECTRIC IDEALARC DC 600 welding power supply, s/n n/a
(196) MILLER DELTAWELD 452 digital welding power supplies, s/n n/a
(2) LINCOLN ELECTRIC PRO CUT 55 portable plasma cutter s/n N/A
(2) LINCOLN ELECTRIC CRUISER digital track welders, s/n n/a

SPECIALTY WIND TURBINE TOWER MANUFACTURING EQUIPMENT

2KM/WATLOW (2012) RMLL-810D-XMC1 fiberglass turbine blade manufacturing line with WATLOW PLC control consisting of: 2KM (2012) POLYTOOL 2K8128 resin piston metering system; customized clamshell turbine blade mold with max 284" x 30" max part dimensions, vacuum bag resin infusion system with (3) vacuum pumps, (16) zone heating blanket with WATLOW PLC control, (2) CLEAN AIR TECHNOLOGIES (2012) SYS-050-1840000 portable high efficiency vacuums, s/n 201201-1
(2) FF01-FF02 wind tower flange fit-up welding jigs, s/n n/a
R.P. HAWBOLDT wind tower section hydraulic up-ender, s/n 5460

TANK TURNING ROLLS

(2) KUMKANG (2012) HGKBS100 100 TON capacity tank turning rolls with 20" rubber lined rolls, (2) position driver & idler roll adjustment, s/n 1391-0101; 1391-0103
(16) JONGHAP (2011) STR-100/50, 100 TON capacity driver & idler turning roll sets with 17.70" urethane lined rolls, bi directional variable speed control with 0.1-1.03 RPM variable speed, 5.5-57 IPM, rail mounted with manual positioning, multi position driver and idler adjustment with conical turning capability, 600V/3PH/60Hz, s/n n/a

FABRICATION EQUIPMENT

PIRANHA P50 hydraulic iron worker with 50 ton capacity, 1-1/16" through 3/4" punch capacity, 3/4" x 10" max flat bar shear capacity, 5" x 5" x 3/8" angle shear capacity, 1" square bar shear capacity, 1 1/2" round stock shear capacity, 2 3/4" x 4" x 1/4" notching capacity s/n 5467
EXCEL 7012 hydraulic iron worker with ... ton capacity, 4" max punch capacity, 4" max shear capacity, 5" x 5" x 3/8" angle shear capacity, 1" square bar shear capacity, 1 1/2" round stock shear capacity, 2 3/4" x 4" x 1/4" notching capacity s/n 7055
YING YAO 3 in 1 combination shear/brake/roll with 40" x 20GA capacity s/n 10214
(2) FEIN (2011) GRIT A/S GI75 floor type belt sanders, s/n n/a

CONVENTIONAL MACHINE TOOLS

(2) KING CANADA KC-918S-V 9"x18" metal cutting horizontal band saw with variable speed, miter capability, coolant, 1"x.032"x131.75" blade, (2) 15"x84" in feed roller conveyors, (2) 15"x120" out feed roller conveyors, s/n n/a (I.D. 4308)/ 0020092
CHEVALIER FSG-618 conventional surface grinder with 6"x16" magnetic chuck, 8" wheel, coolant, s/n n/a
CASER 2' radial arm drill with 8" column, speeds to 2300RPM, 18" x 24" x 16" t-slot box table, s/n 11-334
ARBOGA G2508 floor type gear head drill with 13" x 16" table, speeds to 3480RPM, s/n 299459
OSTER 9006-270 power pipe and bolt threader with max 2" capacity, 14" stroke, coolant, foot pedal control, s/n ACD1022
RIGID 1224 portable power threader with 4 3/4" capacity, RIGID 918 roll groover, dual chuck, tube cutting attachment, reamer attachment, coolant s/n EB13253K97
RIGID 1224 portable power threader with 4 3/4" capacity, dual chuck, tube cutting attachment, reamer attachment, coolant, s/n EB13330K97
RIGID 300-T2 portable power threader with 2" capacity, dual chuck, reamer attachment, s/n ED358570712
OTC electro-hydraulic H-frame shop press s/n N/A
KALAMAZOO 14" abrassive cut off saw with 5HP s/n 386.001

AIR COMPRESSORS

INGERSOLL RAND (2014) R160N-A 200 HP variable speed screw type air compressor with digital microprocessor control, approx 364 HRS recorded on meter at the time of listing, s/n VN1738U14265
INGERSOLL RAND (2014) R160N-A 200 HP variable speed screw type air compressor with digital microprocessor control, approx 143 HRS recorded on meter at the time of listing, s/n VN1739U14265
INGERSOLL RAND (2014) R901-A110 125 HP variable speed screw type air compressor with digital microprocessor control, approx 383 HRS recorded on meter at the time of listing, s/n V2254U14253
INGERSOLL RAND (2014) R901-A110 125 HP variable speed screw type air compressor with digital microprocessor control, approx ONLY 64 HRS recorded on meter at the time of listing, s/n V2253U14253
SULLAIR 12-50L 50 HP screw type air compressor with digital analog control, approx 5040 HRS recorded on meter at the time of listing, s/n 47948JG1
GARDNER DENVER TWISTAIR EWD99D 50 HP OIL FREE screw type air compressor with digital control, approx 29,880 HRS recorded on meter at the time of listing, s/n 5050626
GARDNER DENVER TWISTAIR EWD99D 50 HP OIL FREE screw type air compressor with digital control, approx 30,500 HRS recorded on meter at the time of listing, s/n 5050627
GARDNER DENVER TWISTAIR EWD99D 50 HP OIL FREE screw type air compressor with digital control, approx 29,880 HRS recorded on meter at the time of listing, s/n 5050626
SULLAIR 12-50L 50 HP screw type air compressor with digital analog control, approx 5040 HRS recorded on meter at the time of listing, s/n 47948JG1
SULLAIR S10D-25AC-5 25 HP screw type air compressor with digital analog control, approx 8243 HRS recorded on meter at the time of listing, s/n 003-76347
SULLAIR 175/185DPQ tow behind, diesel powered screw type air compressor with JOHN DEERE 4 cylinder diesel engine, 2979 HRS recorded on meter at the time of listing, s/n n/a (I.D. C-016)
CHAMPION 10 HP tank mounted piston type air compressor s/n n/a
(2) PORTER CABLE 7HP tank mounted piston type air compressors s/n n/a
(3) INGERSOLL RAND (2014) NVC800A600X refrigerated air dryers, s/n 553377; 553423-1; 553423-2
(2) FRIULAIR PURESTREAM DFE118/AC refrigerated air dryer, s/n 041004701; 031000756;
FRIULAIR (2010) PURESTREAM ACT400U-2 refrigerated air dryer, s/n 10004025
(2) ABINGDON STEEL FAB (2014) 6'dia X 25'H steel air receiver tanks, s/n n/a

PAINT BOOTHS

(2) COL-MET (Purchased NEW in 2011 for $ 640K USD each) SO24677.0 side draft paint & bake booth with 120'Lx23'Wx23'H approx interior dimensions, (2) 18'W x 23'H roll up steel doors, (6) man doors, lights and air make up ventilation, steam heat bake air make up system with 138,000 CFM, 50-160 degrees F working temperature range, all bolted construction, s/n 1166-03
JBI downdraft paint & bake booth with 121'Lx24'Wx24'H approx interior dimensions, (2) 18'W x 23'H roll up steel doors, (6) man doors, lights and air make up ventilation, steam heat bake air make up system, all bolted construction, COL-MET (2015) 16' extension s/n n/a
JBI 105'L x 24'W x 24'H approx open ended thru type touch up paint booth with lights, s/n n/a
(2) TRENTON WORKS 73'L x 17'W x 20'H approx thru type paint booths with light and exhaust, s/n n/a
(8) GRACO XP50 D13A high pressure air less paint systems with hoses, heat pumps and guns, s/n n/a

BLAST BOOTHS

COL-MET (Purchased NEW in 2011 for $ 640K USD) SO24695.0 downdraft blast booth with 120'Lx23'Wx23'H approx interior dimensions, (2) 18'W x 22'H roll up rubber panel doors, (4) man doors, (2) SCHMIDT blast pressure pots with (2) manual guns each, (3) auger media recovery system with bucket elevator and dust collector, lights and ventilation, ONLY 473 HRS recorded on meter at the time of listing s/n 1106-05
HOFFMAN downdraft blast booth with 120'Lx30'Wx30'H approx interior dimensions, (2) 18'W x 21'H roll up rubber panel doors, (3) man doors, (2) SCHMIDT blast pressure pots with (8) manual guns each, (3) auger media recovery system with bucket elevator, 20 TON/HR capacity, 60 HP dust collector, lights and ventilation, s/n n/a
(2) INDUSTRIAL VACUUM (2011) HURRICANE 500 EM QUIET CUBE skid mounted cyclonic vacuums with digital microprocessor controls, 100 HP ROOTS 616 blowers, manual lift hopper, level sensors, s/n HS500E-1101; HS500E-1101

TRAVELING GANTRY CRANE

MI-JACK (Purchased NEW in 2011 for $720K USD) MJ110 110 TON capacity traveling gantry crane with 40' inside clear width, 30' height under the hook, 40' wheelbase, 43 degree steering angle, inward facing full cab enclosure with heat, electronic step-less infinitely variable speed all directions, CUMMINS 6.7L diesel with POWER-ON-DEMAND system, load scale with digital read out, (ONLY 1225 HRS recorded on meter at the time of listing) s/n 2041PD

BRIDGE CRANES

MUNCK (2013) 50 TON capacity free standing double girder overhead crane with approx. 75.5' span, 24' height under the hook, radio pendant control, s/n 13-00065
ZENAR (Purchased NEW in 2011 for $540K CAD) 40 TON capacity, class D, double girder, top running OUTDOOR overhead bridge crane with approx. 100' span, 31' max height under the hook, cab & remote control, digital crane hook scale with large easy read LED DRO, s/n 8409
(2) ZENAR (Purchased NEW in 2011 for $540K CAD each) 40 TON capacity, class D, double girder, top running overhead bridge cranes with approx. 87’11” span, 31' max height under the hook, GENTEC radio pendant control with optional tandem run feature, s/n 8403; 8404
(4) ZENAR (Purchased NEW in 2011 for $540K CAD each) 40 TON capacity, class D, double girder, top running overhead bridge cranes with approx. 87’11” span, 31' max height under the hook, GENTEC radio pendant control with optional tandem run feature, digital crane hook scales with large easy read LED DRO, s/n 8405; 8406; 8407; 8408
DEMAG 20 TON capacity free standing gantry crane system with (2) DEMAG 10 TON capacity top running single girder bridge cranes with approx. 30' span, 150' runway with uprights, 20' height under hook, all bolted construction, s/n D1154; D1152
OCS 15 TON capacity, double girder, top running overhead bridge crane with approx. 88' span, 20' max height under the hook, pendant and cab control, s/n 9435-21
OCS 10 TON capacity, double girder, top running overhead bridge crane with approx. 88' span, 32' max height under the hook, pendant control, s/n 9416-21
MFG N/A 10 TON capacity, double girder, top running overhead bridge crane with approx. 68' span, approx. 20' height under hook, pendant control, s/n 1116
MFG N/A 10 TON capacity, double girder, top running overhead bridge crane with approx. 100' span, approx. 30' height under hook, pendant control, s/n n/a
KONE CRANES 4300LBS capacity free standing fixed gantry crane with approx. 30' span, approx. 15' height under hook, ARO 2 ton pneumatic chain hoist, all bolted construction, s/n n/a
NORTHERN 15 TON capacity double girder, top running overhead bridge crane with approx. 88' span, approx. 26' height under hook, pendant & cab control, s/n 1125
SHAWBOX 25 TON capacity double girder, top running overhead bridge crane with approx. 88' span, approx. 28' height under hook, pendant & cab control, s/n 1118
PROVINCIAL 20 TON capacity, double girder, top running overhead bridge crane with approx. 100' span, 20' max height under the hook, pendant cab control, s/n n/a (NOT IN SERVICE)
TRENTON WORKS J55 900lbs capacity free standing jib arm crane with 21' span, 16' height under hook, (no hoist) s/n N/A
DEMAG 7.5 TON capacity, single girder, top running overhead bridge crane with approx. 31' span, 14' max height under the hook, 134' runway, pendant control, s/n 85578
DEMAG DOVER 7.5 TON capacity, single girder, top running overhead bridge crane with approx. 31' span, 19' max height under the hook, pendant control, 100' freestanding gantry system with uprights and runway all bolted construction, s/n 1158-D3
CRANE PRO 500 LBS capacity freestanding jib crane with 110" reach span, 75" height under the hook, ARO 250 KG pneumatic chain hoist, s/n n/a
LD III 28' x 25 TON capacity plate lifting spreader beam with (3) WALKER NATIONAL CAT 20x72 RL lifting electro-magnets with 37,500 LBS capacity ea. (5) underslung hook positions, s/n n/a
LD 158 28' x 25 TON capacity plate lifting spreader beam with (3) WALKER NATIONAL CAT 20x72 RL lifting electro-magnets with 20,000 LBS capacity ea. (5) underslung hook positions, s/n n/a
LD 017 47' x 11 TON capacity spreader beam with (11) underslung hook positions, s/n n/a
LD 106 12' x 7 TON capacity spreader beam with (3) underslung electromagnets, s/n n/a
LD 140 14' x 20 TON capacity spreader, s/n n/a
LD 018 21' x 12 TON capacity spreader beam with (3) WALKER NATIONAL CAT 12x60 RL lifting electro-magnets, (5) underslung hook positions, s/n n/a
LD 00141 21.6 TON capacity “C" type lifting hook, s/n n/a
LD 00142 21.6 TON capacity “C" type lifting hook, s/n n/a
LD 00170 20 TON capacity “C" type lifting hook, s/n n/a
LD 00143 20 TON capacity “C" type lifting hook, s/n n/a
LD 159 64' X 70 TON capacity spreader beam with pneumatic actuated underslung hooks, s/n n/a
WALKER NATIONAL BP 23X48-272 lifting electro-magnet with 50 TON hot lifting capacity, 75 TON cold lifting capacity, s/n 1221

RAIL ROLLING STOCK

(2) GENERAL ELECTRIC (REBUILT 1994) CLASS B-B-90/90-2 GE733 45 TON diesel-electric shunt locomotives with (2) CUMMINS 6 cylinder diesel engines, (2) trucks, (2) live axles, side rod, s/n 32242; 29880
(2) GENERAL ELECTRIC CLASS B-B-90/90-2 GE733 45 TON diesel-electric shunt locomotives with (2) CUMMINS 6 cylinder diesel engines, (2) trucks, (2) live axles, side rod, s/n 29013; n/a
(12) TRENTON WORKS 80' flat deck rail cars with 84' x 8.5' steel deck, s/n CBNS901291; SSCX125; IC977516; CBNS901196; SSCX; SSCX138; SSCX140; CN4037; n/a; CN40362; 135; (SHUNTER/YARD CARS)
(2) TRENTON WORKS 46' flat deck rail cars with 46' x 8.5' steel deck, s/n 11; 241 (SHUNTER/YARD CARS)
(2) TRENTON WORKS 52' flat deck rail cars with 52' x 8.5' steel deck, s/n 27; 14 (SHUNTER/YARD CARS)

ROLLING STOCK

CHEVROLET (2013) SILVERADO 1500 regular cab pickup truck with 4.3L V6, auto, RWD, approx 53,000 KM recorded on meter at the time of listing, tailgate not available, VIN 1GCNCPEX8DZ381920
HYUNDAI (2010) SANTA FE 4-DR SUV with 2.4L 4 cylinder engine, auto, FWD, power package, approx. 190,000 KM recorded on meter at the time of listing, VIN 5NMSG3AB9AH402235
CHEVROLET (2001) SILVERADO 3500HD regular cab flatbed truck with 6.5L DIESEL engine, 5 speed manual transmission, RWD, dually, 55,000 KM recorded on meter at the time of listing, VIN 3GBKC34F31M100452
GMC (2001) SIERRA 2500HD regular cab pickup truck with 6.0L V8 engine, auto, 4WD, unknown KM, WESTERN 8'6" MVP+ hydraulic V-plow, VIN 1GTHK24U21Z324621
CHEVROLET (2001) SILVERADO 2500HD regular cab pickup truck with 6.0L V8 engine, auto, RWD, unknown KM, VIN 1GCHC24UX1E269324
FORD (1996) F SERIES SUPER DUTY regular cab flatbed truck with 7.3L DIESEL engine, auto, RWD, dually, 310,000 KM recorded on meter at the time of listing, WESTERN TORNADO salt spreader, VIN 1FDLF47F8VEA72549
CHEVROLET (2001) SILVERADO 1500 regular cab pickup truck with 4.3L V6, auto, RWD, unknown KM, VIN 1GCEC14W51Z298110
BOBCAT 743 skid steer loader with diesel engine, bucket attachment, pneumatic tires, approx 3312 hours recorded on meter at the time of listing, s/n 5019-M-36703
TOYOTA 7FDU35 7,000 LBS capacity diesel forklift with 187" max vertical reach, 3-stage high visibility mast, side shift, outdoor pneumatic tires, approx. 4,500 HRS recorded on meter at time of listing, 61721
CATERPILLAR DP35 6,250 LBS capacity diesel forklift with 187" max vertical reach, 3-stage high visibility mast, side shift, outdoor pneumatic tires, full cab enclosure with heat, approx. 10,200 HRS recorded on meter at time of listing, s/n 8BM00196
CATERPILLAR DP35K 7,000 LBS capacity diesel forklift with 131" max vertical reach, 2-stage high visibility mast, side shift, outdoor pneumatic tires, approx. 9305 HRS recorded on meter at time of listing, s/n AT14C-55036
SELLICK SG60 6,000 LBS capacity outdoor diesel forklift with 264" max vertical reach, 3-stage mast, outdoor pneumatic tires, low profile full cab enclosure with heat, approx 8400 HRS recorded on meter at the time of listing, s/n 21994C9652
HAULOTTE (2005) HA61JRT indoor/outdoor diesel articulating boom lift with 550 LBS capacity, 61' max reach, 4WD, outdoor pneumatic tires, approx 3084 HRS recorded on meter at the time of listing, s/n AD109632
JLG (2000) 66OSJ indoor/outdoor LPG/GAS straight boom lift with 500 LBS capacity, 66' max reach, 2WD, outdoor pneumatic tires, approx 4658 HRS recorded on meter at the time of listing, s/n 126783
KARCHER (2005) KMR 1550B ride on type gas powered floor sweeper with BRIGGS AND STRATTON 16hp engine, 36" brush, side brush, hydraulic dumper, ONLY 389 HRS recorded on meter at time listing VIN W0994801854K88002
NILFISK ADVANCE 2060 ride on type gas powered floor sweeper with 1212 HRS recorded on meter at time listing, gas engine, 36" brush, side brush, hydraulic dumper s/n S13C59R59A5P
(2) TEXTRON EZ-GO RVX gas powered golf carts, s/n 5079306; 5079341
INGERSOLL RAND CLUB CAR gas powered golf cart, s/n N/A
RAYMOND (1998) EASI-1 4,500 LBS capacity reach truck with 211" vertical reach, 36 V battery, 2486 HRS KH recorded on meter at the time of listing, s/n EZ-A-98-09019

FACTORY EQUIPMENT

CATERPILLAR (2005) LC6 diesel powered generator with caterpillar 3406 6 CYL diesel engine, 600/340V, 3PH, 60HZ, 350KW, 437KVA, 420 Amp, 141 HRS recorded on meter at the time of listing, skid mounted, s/n G6B00885
OLYMPIAN (2000) D100P1 diesel powered generator with PERKINS 6 CYL diesel engine, 600/340V, 3PH, 60HZ, 100KW, 125KVA, 120.3 Amp, 360 HRS recorded on meter at the time of listing, skid mounted with aluminum fuel tank included, s/n F1838E4/001
CHAMPION C6250 gas powered generator, s/n n/a
GARDNER BENDER BRUTUS CP8000 cable puller set with gang box s/n N/A
EZ-KLEEN EK+ portable hot pressure washer with HONDA 9HP gas engine, diesel fired heater s/n N/A

ALSO:
HOUGEN ROTABROACH magnetic base drills, MILWAUKEE magnetic base drill, BUX 5HP magnetic base drill, (2) ENERPACK portable electro-hydraulic power-pack with assorted cylinders; LARGE SELECTION of power tools consisting of abrasive chop saws, double end grinders, MAKITA & STIHL gas powered chop saws, 4" to 6" electric angle grinders, drills, nibblers, pneumatic impact guns, pneumatic die grinders, abrasive cut-off saws; huge selection of quality brand name hand tools, socket sets; LARGE SELECTION of heavy duty welding tables, (5+) JET & KNAAK portable job boxes; (10+) steel gang boxes with welding supplies; (25+) self dumping hoppers; LARGE QUANTITY OF LIFTING MAGNETS and LIFTING ACCESSORIES; STORES & SPARE PARTS INVENTORY comprising FASTENAL & WURTH indexed fastening hardware cabinets with associated hardware, electrical parts and components, electrical fuses; (10+) GRACO heavy duty pneumatic grease pumps; LARGE QUANTITY of ELECTRIC MOTORS, GEAR REDUCERS, GEAR BOXES, MACHINERY PARTS, WELDING PARTS AND ACCESSORIES; FORKLIFT PARTS; (50+) sections of medium duty adjustable pallet racking; (75+) automotive style steel bins; ladders; shop fans; executive office furniture, file cabinets, lockers, business machines and MUCH MORE!

AUCTION CONDUCTED BY CORPORATE ASSETS INC. PROUDLY IN CONJUNCTION WITH: THE BRANFORD GROUP & PRESTIGE AUCTIONS

About the Auctioneer

Address
373 Munster Avenue
Toronto, Ontario M8Z 3C8
Canada