Auction - Timed OnlineGull Wing Industries, Inc. - Industrial Sheet Metal FabricationPast

ID #
12845
Description
Press Brakes, Shear, Turret Punch Press, Lathe, Welders, Forklifts, Truck Tractor & More!
Type
Timed Online
Starts At
5/19/21 8:00 AM CDT
Ends At
6/17/21 9:00 AM CDT
Inspection
June 16, 8:00 AM to 5:00 PM or by appointment.
Location
309 NE 1st Street
Alta, Iowa
United States
Equipment Marketers & Appraisers (EMA)

This Auction Is No Longer Active

Receive Auctions By Email

You now can receive a daily email with all promoted auction events. Simply visit your email settings to set up your update.

ID #
12845
Description
Press Brakes, Shear, Turret Punch Press, Lathe, Welders, Forklifts, Truck Tractor & More!
Type
Timed Online
Starts At
5/19/21 8:00 AM CDT
Ends At
6/17/21 9:00 AM CDT
Inspection
June 16, 8:00 AM to 5:00 PM or by appointment.
Location
309 NE 1st Street
Alta, Iowa
United States

Summary of Items

Featured Highlights

Press Brakes: 2004 Piranha press brake, model 17512, serial number 17512- 1036, 175-ton capacity, 12’ overall, 10 6” between the housings, 6” riser block, 175-ton capacity, equipped with Automec CNC 300 auto gauge back gauge, speed control, tonnage control, purchase new, one owner, very good appearance, used on a routine basis. buyer removes at buyers’ expenses.

Diacro press brake hydro mechanical, model 16-72, sn JE1019, the ID tag is missing, 35-ton, 6 foot overall 62 inches between the uprights, front operated mechanical back gauge, manual RAM adjustment, BANNER light curtains, operational.

(14) lots of press brake dies up to 12’ length, various sizes and types.

Shear: Piranha hydraulic shear, model M1/4-10, serial number 1086, 10’ x 1/4″ capacity, programmable front operated power back gauge, 39 inches of travel, single, jog, continuous mode, programmable cut length, hydraulic hold downs, very good appearance.

Turret Punch Press: Strippett CNC turret punch press, model 1250MXP-30, catalogue number 122289-002, serial number 202-611-1095, 30-ton capacity, 40 tool station, (4) indexable stations, one of the 4 is an 8 multi tool indexable, 50“x 120“sheet size, thick turret style tooling, GE Fanuc series OP control, the monitor is etched, machine is operational.

Sander: Timesavers belt sander model 2211-23-0, serial number 28882, 20/10 hp 460 V three phases, 36-inch belt, dry type, single belt, pneumatic tensioning, pushbutton control, feed speed control, programmable height control, used for metal. Purchase new one owner.

Apron brake: Chicago Dries Krump apron brake, model BP0-812-6, serial number 323591-M, 8 foot with 12-gauge capacity, with a full set of fingers, original paint and decal, original condition, very good appearance.

Lathe: Clausing Colchester engine lathe, model 17-inch, serial number 7/0219/11911, 12-inch 3 jaw chuck, 14″ combination 4 jaw chuck 17″ faceplate, power longitudinal feed, power cross feed, taper attachment, English and metric thread, 2 11/16 spindle bore, 17” swing, 64″ center to center, includes DTM quick change tool holder, operates on an as needed basis.

Spot welder: Western Arctronics spot welder, model 30 KVA, serial number FK952, 230V, 100-amp, rocker arm type, with timer, water cooled, foot control, has good appearance.

Painting equipment: Advance Curing Systems, SN 2684-1 painting system, consisting of 3 stage washer, Stage 1 with 1.5 MIL BTU heater natural gas power, iron and phosphate Stage 2 rinse, Stage 3 seal rinse, cure oven 2 MBTU burner, approximately 200′ of conveyor 24″ spacing, variable speed 0-6’/min, maximum part 60″x48″x12′, powder booth 10′ length, 8’ width, buyer removes at buyers’ expense.

Welders: Miller wire welder, Millermatic 350P, serial number LG180349B 200/230/460 V, single or three phase, 350 amp, has voltage and wire speed control, or control, self-contained wire feeder, MIG gun, includes argon 75%, carbon dioxide 25% gas bottle, purchased new, one owner.

Miller power supply, model XMT 304 DC inverter arc welder, serial number KJ143439, 230/460 V single or three phase, 300 amp, 60% DC, voltage and amperage adjustment, includes the Miller Super S32P voltage sensing wire feeder, with Tweco MIG gun, and also includes Miller Spoolmatic 30 AA Aluminum welding gun, entire system is mounted on a 4 caster cart.

TRW Nelson’s stud welder, model TR- 450B, serial number 329481, 1/4 inch up to 1/2-inch stud diameter, includes stud gun, has not been used for many years, current condition unknown.

Angle roll: 1996 E.G.Heller angle roll, model 2000 E Z3023, serial number 96G-0006, 220 V three phase., shafts diameter 1.18 inches, shaft length 2.9 inches, rolls diameter 5 inches, maximum opening between rolled 3.8 inches, working height 34 inches, machine weighs approximately 364 pounds.

Forklifts: Toyota outdoor type forklift, model 7FGU 25, serial number 60478, rated at 3750-pound capacity, triple stage free lift mast, 189-inch mast heights, 48-inch forks, side shift, pneumatic tires, front tire size 7.00 -12 NHS, rear tire size 6.00 -9.00, LP fuel, automatic transmission, fall on proof suspension, 9078 hours on the meter, original paint decal, used on a routine basis.

Hyster forklift model H 200ES, SN V7D – 4780N, integral side shifter, weight of forklift 26,800 pounds, 182” mast heights, rated at 18,000-pound capacity, outdoor type, tires front dual tires solid rubber, wheel size 9.00–20, limited tread, 60-inch fork length, double stage, non-free lift, GMC V6 gas power engine, fall on proof suspension, functions on an as needed basis, has oil leaks, has added a master shut off switch.

Truck Tractor: Manufactured in 1999, titled as a 2000 International truck tractor, model 9100 I 6×4, VIN 2HSCBAHR8YC072866, day cab, 52,000 pound GVWR, 12,000 pound front axle, 40,000 pound rear axle capacity, Eaton Fuller 10 speed transmission, sliding fifth wheel, power divider lockout, four bag air ride suspension with dump valve, air brakes, air conditioning and heat, power mirrors, speed control, throttle control, engine brake, AM/FM weather radio, 686,098 miles on the odometer, manual windows, manual locks, two seats, the interior is exceptionally clean for a truck of this age, Cummins ISM 11 355/375 hp, engine compartment is clean, front tire size 11R22.5 on steel rims was approximately 65 to 75% tread remaining, (2) 75 gallon aluminum fuel tank, rear tires are 11R22.5 on steel rims with 70 to 85% tread remaining, single stack, 161 inch wheelbase, 69 inches from front axle spindle to back of cab, back of cab to rear axle 122 inches, front bumper to rear frame 262 inches, in good condition for its age. This truck has been stored indoors.

Sheet metal: Numerous lots of carbon steel sheets, Aluminum sheets, Galvanized sheets.

Copper bar: 1381 lbs. Copper bars, (10) 1/4” by 5” width by 12’, 1/4” by 2” width 12’, 1/4“x 1“ 12’, 4 inch 4“ x 1/4” x 12’.

Racking: Quantity of custom-built sheet steel tacks with roll out shelves; Lot of pallet racking, assorted racks.

Distribution Panels: (4) Gull Wing power distribution panel, model GWTB54HMLM- 5U2005, serial number 89911–146, line voltage 480, LD voltage 120/280, three phase, four wire, type 3R, short circuit current with Stan rating 10,000 A, 20 amp and 30-amp breakers, Square D breakers, 50-amp, 20-amp receptacles, mounted on portable base.

Electrical supplies: Large quantity of lots consisting of electric copper wire, breakers, boxes, couplers, VFD, Lugs, switches, transformers, to many items to mention.

General support: quantity of power hand tools, quantity of manual tools, finally have drop cords, quantity of fashioner hardware, (6) closed parent jobox gang boxes, copper cable, racking, office furniture and equipment, painting supplies, and general support merchandise.

About the Auctioneer

Address
P.O. Box 369
Cedar Falls, Iowa 50613
United States