Auction - Live WebcastPlastic Injection Molding Machines - Live Virtual AuctionPast

FEATURING -

Plastic Injection Molding Machines

Negri Bossi
Negri Bossi injection molding machine, Janus model M224, Euromap classification 1700H - 670, serial number 224–100, manufactured in 2010, 460 V, hybrid machine, screw diameter 45mm, 12 ounce shot size, real injection volume 374cc, distance between tie bars (H x L) 18.11X20.87 inches, platen dimensions (H xL) 27.17X30.31 inches, 13,544 hours on the meter. Has robotic interface, includes hopper dryer. Sells with owners’ confirmation. Lot 45

Toshiba
Toshiba injection molding machine, model ISE 720–54B, serial number 612803, new in 1986, clamping force 716 short ton, 125.9 ounce shot size, distance between tire rods, (H x V) 37.4“x 37.4 inches, platen dimension (H x V) 55.1X 55.1 inches, clamping stroke 53.1 inches, open daylight maximum 70.9 inches, close daylight minimum 17.8 inches approximate weight 77,200 pounds, This machine has been producing parts. Has core pull one, no air blow. Sells with owners’ confirmation. Lot 51

Toshiba injection molding machine, model ISE 500–27V, serial number 824201, manufactured in 1988, clamping force 496 short tons, distance between tire rods (H x V) 31.8“x 31.8 inches, platen dimension ( H x V) 45.6 by 45.6 inches, 62.7 ounce barrel, Injectrol Control, Pro Visor PMC heater control, core pull, eject, air blow. This machine was producing parts. Lot 57

Toshiba injection molding machine model ISE 500–27V, serial number 720807, manufactured in 1987, clamping force 496 short tons, distance between tire rods (H x V) 31.8“x 31.8 inches, platen dimension ( H x V) 45.6 by 45.6 inches, Injectrol Control, Pro Visor PMC heater control. Does not have core pull, air blow, does not have any safety switches on the backside. Lot 58

Toshiba injection molding machine, ram type, model ISF390VL - 19V, serial number 327110, new in 1993, Injectvisor VL CONTROL, core pull, no air blow, eject, injection capacity PS 40.9 ounces, clamping force 386 ton, mold opening fours 28.6 ton, distance between tire rods (H x V) 27.9“ x 27.9 inches, platen dimension ( H x V ) 39.3 by 30 9.3 inches, clamping stroke 37.4“, open daily (maximum distance) 49.2 inches, close daylight minimum (mold distance) 11.8 inches ejection stroke 4.9 inches, Sells with owners confirmation. Lot 49

Toshiba injection molding machine, model ISF250VL - 198, serial number 377409, manufactured in 1993, Injectvisor VL Control, eject, core pull, no air blow, clamping force 240 ton, distance between tire rods 22 inches horizontal by 22 inches vertical, platen dimensions 32.3 inches horizontal, 32.3 inches vertical, 8.1 ounce barrel, this machine was producing parts. Has core pull, no air blow. Sells with owners’ confirmation. Lot 54

Toshiba injection molding machine, model IS220FA - 10 A, serial number 491405, manufactured in 1994, injectvisor SI Control, 4 zone heater, eject, no core pull, no air blow mold close protection safety valve needs repair, 22 1/2 inches horizontal distance between tie bar, 22 inches vertical distance between tie bars, platen size 32“ x 32“, 250 mm stroke, 220 ton clamp force. An electric motor needs repair. Lot 53

Toshiba injection molding machine, model ISF190S - 2–10 A, serial number 263507, manufactured in 1992, currently the main pump is not functioning on this machine, considered to be non-operational. Lot 59

Toshiba injection molding machine model ISG120V 10 3A, serial number 50876, manufactured in 1996, clamping force 110 ton, 3.4 ounce shot size, tie bar spacing 18.1 horizontal by 16.1 vertical, platen dimension 26 inches horizontal by 24 inches vertical, single air blow, no core pull, intermittent problem with back pressure valve sticking screw doesn’t recover. Located in Roland, Iowa. Sells with owners’ confirmation. Lot 46

Toshiba injection molding machine, model ISF120S 2 - 5 A, serial number 495802, manufactured in 1994, InjectVisor SI Control, 4 zone heat, eject, core pull, clamping force 113 tons, distance between tire rods (H x V ) 16.1“ x 16.1“, platen dimensions (H x V ) 24“ x 24“, 8 ounce barrel. Sells with owners’ confirmation. Lot 48

Boy
Boy injection molding machine model 22D, serial number 29163, manufactured in 1994, clamping force 220 KN, 1 ounce barrel. Lot 50

Van Doren
Van Dorn injection molding machine, model 85 – RS – 3F – VV – HT, Lot 3, serial number 148, manufactured in 1989, Van Dorn pathfinder control, clamping force 85 ton, this machine has not been able to produce parts. Lot 52
Van Dorn injection molding machine model 300 – RS – 30 F - HT, lot number 113, serial number 2318, manufactured in 1992, Van Dorn pathfinder control, this machine is not producing parts. Lot 55

Nissei
Nissei Injection molding machine, model FS360S100ASC, serial number S36F061, manufactured in 1987, needs hydraulic pump repair. Clamping force 363 ton, this machine is in fair to poor condition. Lot 56

Nissei injection molding machine, model FS360S100ASE, serial number S36J040, manufactured in 1989, distance between the tire rods vertical 27 3/4 inches, horizontal distance 28 1/8 inch, 360 ton clamp force, 26 inch centimeter injector travel, machine is in poor condition. Lot 60

Nissei injection molding machine, model FS260S71ASE, serial S26L019, manufactured in 1991, this machine is considered non-operational. Lot 61

Dryer Hopper bin
(11) resin dryer hoppers, various sizes and brand names. Lot 73-81

Resin Mixer
IMS mixer model TG - 0255, serial number S - 35270642, 240/460 V three phase, 2 hp, gearbox, manual barrel clamp, 34 inch height. Lot 39

Resin silo
Resin silo, (6) galvanized corrugated rings, bolt together design, six ring height, mounted on eight support legs, side fill tube for plastic resin, safety ladder guard, bin indicator, located outside, cone bottom, very good appearance. Sells with owners’ confirmation. Lot 73

Forklift
Caterpillar forklift model GC70K, serial number 80 890-0651, rated 15,500 pound capacity, 148 inch mast height, includes Wesco PIV jib, rated at 6000 pound capacity, the jib and forklift will sell as a package. Very good appearance. Sells with owners’ confirmation. Lot 40

Raymond standup forklift, model EASI, serial number ET - B – 95–02260, 24 V, rated at 2,500 pounds capacity, 181 inch mast height, double stage, pantograph reach attachment, Sells with owners confirmation. Lot 41

Drexel forklift, model SLT30, serial number 902162–156, electric type, 36 V, battery type LA, rated at 3000 pounds capacity, 205 inch mast, view the video for demonstration. Sells with owners’ confirmation. Lot 42

Clark forklift model GCS15, indoor type, serial number G127–0 565–7228KOF, rated at 2700 pounds capacity, 188 inch mast height, triple stage mast, free lift, has a carburetor exhaust problem. Lot 43

Hyster forklift model S30 XL, serial number B010B08866N, indoor type, rated at 2750 pounds capacity, 191.5 inches mast height, this forklift is considered non-operational, has not operated for five years. Lot 44

Air Compressor
Gardner Denver air compressor, rotary screw type, model FVF0FC, identification number 8ACCAAC, serial number M35656, rotary screw type, 25 hp, 7950 hours on the meter, Sells with owners’ confirmation. Lot 35

Quincy air compressor, model QMB25ACA32SG, serial number UN047440, rotary screw type, 58,322 hours on the meter, 25 hp. Sells with owners’ confirmation. Lot 36

Refrigerant dryer, used with the air compressor systems, unable to locate a manufactures ID tag, has been retrofitted and mounted on a 60 gallon horizontal air tank. Lot 37

Bauer air compressor, 50 hp, 230/460 V rotary screw type, condition unknown. Lot 38

Vertical Milling Machine
Allianz milling machine, model RT2S standard head, serial number 61110066, 9“ x 42“ T slotted table, step pulley head, 80–2760 RPM. Lot 28

Drill Presses
Johansson drill press, model unknown, serial number 21300, sliding head, geared head 105 – 1200 RPM. Lot 27

Jet drill press, model number JDP - 14MF, serial number 106-0956, 3/4 HP power, single phase. Lot 28

Stretch Wrap machine
Orion stretch wrap machine, model L6 6–9, serial number 409-4662, 120 V, single phase, 59 inch round diameter table, approximately 60 inches vertical travel, forklift transportation channels, blue in color. Sells with owners’ confirmation. Lot 31

Cardboard Packer
Cram-A - Lot cardboard packer, model 60, serial number 983-1199, self-contained hydraulic power pack, push button controls, automatic or manual controls, pushbutton controls, with extra tie wire, 29 1/2 inches depth, 60 inches left to right, blue in color, has very good appearance. Sells with owners’ confirmation.

Granite Surface Plate
Cram-A - Lot cardboard packer, model 60, serial number 983-1199, self-contained hydraulic power pack, push button controls, automatic or manual controls, pushbutton controls, with extra tie wire, 29 1/2 inches depth, 60 inches left to right, blue in color, has very good appearance. Sells with owners’ confirmation. Lot 34

Pick Up Truck
Chevrolet pickup truck, model 1500, 2007 model year, VIN 1GCEC14 X77Z178472, model C15903, GVWR 6400 pounds, regular cab, manual windows, manual locks, cloth interior, 40/20/40 seats, automatic transmission, 195,980 miles on the odometer. Lot 72

Cooling Tower
AEC chiller, NECW-1-15, SN 93G0995, 15 HP, 460 V three phase, heat transfer fluid water refrigerant R 20-to-15-pound, minimum temperature 45°, (1) heat exchanger, (1) evaporator, mounted on a shop made support stand. The PVC piping does not sell with this unit. Lot 67

Thermal Care Chiller, unable to identify model or serial number. Mounted on casters. Lot 68

Circulation tank and pumps. Lot 69

Circulation tank and pumps, (1) 10 hp circulation pump, (1) 5 hp circulation pump, (1) 5 hp circulation pump, steel tank. PVC piping is not included with this lot. Lot 70