Auction - Live WebcastNexxa Industries Ltd.

FEATURING:

DOOSAN (2020, commissioned in 2021) PUMA GT3100 CNC turning center (LIKE NEW); HYUNDAI WIA (2014, commissioned in 2015) F500 5-axis vertical machining center; OMAX (2007) 55100 CNC waterjet cutting system ; NAKAMURA-TOME (2003) SC-300 CNC turning center; CINCINNATI HAWK 150 A2100 CNC turning center; MATSUURA (2001) MC-800VG2 vertical machining center; MATSUURA (2001) RA-2G twin-pallet vertical machining center; MATSUURA RA-3G2 twin-pallet vertical machining center; KASTO (2004) KASTO A 2 CNC horizontal bandsaw; HYD-MECH (2003) S-20 horizontal bandsaw; MODERN 22-80 gap bed engine lathe; TIMESAVERS 125 IMW 25” automatic belt sander; FS CURTIS FNB11B8X3JXXX 15 HP air compressor; FRUILAIR (2011) ACT75U-1 air dryer; (3) BURR KING VIBRA KING 25 vibratory finishing machine; MITSUBISHI (REFURBISHED 2007) 2FBC15 36V electric forklift with 3,000 LB capacity; ALSO FEATURING: BT 40 tool holders, tool cabinets with perishable tooling, machine vises, rotary table, angle plates and indexing heads, selection of inspection equipment, non-ferrous and ferrous raw materials, MRO spare parts & MORE! CNC TURNING CENTERS

DOOSAN (2020, commissioned in 2021) PUMA GT3100 CNC turning center with DOOSAN EOP CNC control, 28.35” swing over bed, 18.94” max. turning diameter, 29.72” max. turning length, travels: X-10.24”, Z-32.68”, 4.53” spindle bore, 10-station turret, speeds to 2,800 RPM, 29 HP spindle motor, SAMCHULLY MH-212 12” 3-jaw chuck, coolant, chip conveyor, hydraulic tailstock, tool checker arm, LNS (2021) CHIPBLASTER D30-35 chip blaster (may be sold separately), s/n ML0311-000392
NAKAMURA-TOME (2003) SC-300 CNC turning center with FANUC 21-T CNC control, 22.04” max. swing over bed, 13.77” max. turning diameter, 23.62” max. turning length, travels: X-8.75”, Z-25”, 3.34” spindle bore, 12-station turret, speeds to 3,500 RPM, 29.91 HP spindle motor, KITAGAWA B- 212 12” 3-jaw chuck, coolant, chip conveyor, hydraulic tailstock, tool checker arm, s/n S308105
CINCINNATI (2000) HAWK 150 A2100 CNC turning center with ACRAMATIC 2100 CNC control, 20.47” max. swing over bed, 9.45” max. turning diameter, 17.32” max. turning length, travels: X-8.46”, Z-17.32”, 2.01” spindle bore, 12-station turret, speeds to 5,500 RPM, 7.5 HP spindle motor, 7” 3-jaw chuck, coolant, chip conveyor, hydraulic tailstock, s/n 7051 A00 990446

5-AXIS CNC VERTICAL MACHINING CENTER

HYUNDAI WIA (2014, commissioned in 2015) F500 5-axis vertical machining center with FANUC I SERIES CNC control, 47.2” x 19.7” table, travels: X-31.5”, Y-18.1”, Z-20.5”, A-180 DEG in 0.01 DEG increments, B-90 DEG in 0.01 DEG increments, 30.9” maximum distance spindle nose to tabletop, spindle speeds to 10,000 RPM, BT 40 taper, 24-station ATC, RENISHAW OTS tool setter, through spindle coolant, chip conveyor, s/n G3684-1422

4-AXIS CNC VERTICAL MACHINING CENTER

MATSUURA (2001) MC-800VG2 vertical machining center with YASNAC CNC control, 45.27” x 20.07” table, travels: X-31.5”, Y-20.07”, Z-19.68”, A-180 DEG in 0.01 increments, 25.59” maximum distance spindle nose to tabletop, spindle speeds to 12,000 RPM, BT 40 taper, 30-station ATC, through spindle coolant, chip conveyor, 200-220v/3ph/50-60hz, s/n 010314675 (4th axis may be sold separately)

TWIN-PALLET CNC VERTICAL MACHINING CENTERS

MATSUURA (2001) RA-2G twin-pallet vertical machining center with YASNAC CNC control, (2) 28.3” x 17.3” pallets, travels: X-26”, Y-18.11”, Z-19.09”, 25” maximum distance spindle nose to tabletop, spindle speeds to 15,000 RPM, BT 40 taper, 30-station ATC, coolant, chip conveyor, 200-220v/3ph/50-60hz, s/n 010214544
MATSUURA (2000) RA-3G2 twin-pallet vertical machining center with YASNAC CNC control, (2) 31.5” x 19.3” pallets, travels: X-31.5”, Y-20.08”, Z-19.69”, 25.59” maximum distance spindle nose to tabletop, spindle speeds to 12,000 RPM, BT 40 taper, 30-station ATC, coolant, chip conveyor, 200-220v/3ph/50-60hz, s/n 000914369 (not in service)

CNC WATERJET CUTTING SYSTEM

OMAX (2007) 55100 CNC waterjet cutting system with OMAX WINDOWS PC based CNC control, 55” x 100” table, travels: X-97”, Y-52.6”, Z-6”, bevelling head with 9 DEG tilt, OMAX P4055V intensifier pump (rebuilt 05/2020), closed loop filtration system, media recovery system, 460v/3ph/60hz, s/n B512083

CNC HORIZONTAL BANDSAW

KASTO (2004) KASTO A 2 CNC horizontal bandsaw with KASTO COMPACT CNC control, 10.25” x 10.25” cutting capacity, 30” stroke hydraulic feed saddle, bundle cutting, 178.35” x 1.34” x 0.04” blade, coolant, chip conveyor, 108” in feed conveyor, 440v/3ph/60hz, s/n 6459 102 012

CONVENTIONAL MACHINE TOOLS

MODERN 22-80 gap bed engine lathe with 22” swing over bed, 31-3/8” swing over gap, 80” between centers, 4-1/16” spindle bore, speeds to 1,200 RPM, 16” 3-jaw chuck, in/mm threading, steady rest, ACU RITE 2-axis DRO, 208v/3ph/60hz, s/n 01009
HYD-MECH (2003) S-20 horizontal bandsaw with 2 HP motor, manual bundling, coolant, 208v/3ph/60hz, s/n 61000308
TIMESAVERS 125 IMW 25” automatic belt sander, 230v/3ph/60hz, s/n 19152
DOUCET PMC-202 stroke belt sander with 28” x 71.5” table, 6” x 202” sanding belt, 3 HP motor, PIONEER PNR 12-100 dust collector unit, s/n 7006-09-211
REXON RDM-100F 14” drill press with 12” DIA table, 5/8” capacity, s/n N/A
ADVANCE drill press with ½ HP motor, s/n N/A
(2) MFG UNKNOWN arbor presses with 5.25” throat, s/n N/A

FACTORY SUPPORT EQUIPMENT

FS CURTIS FNB11B8X3JXXX 15 HP air compressor with 125 PSI, 230v/3ph/60hz, s/n NB11F18071
FRUILAIR (2011) ACT75U-1 air dryer with 200 PSIG max. air pressure, 115v/1ph/60hz, s/n 110003074
TAL INTERNATIONAL (2010) 1CC-03FE20C-02G 20’ sea container, s/n TCCC10A 007237
(3) BURR KING VIBRA KING 25 vibratory finishing machines, s/n BK-21565; BK-21566; BK-21567

ROLLING STOCK

MITSUBISHI (REFURBISHED 2007) 2FBC15 36V electric forklift with 3,000 LB capacity, 188” maximum vertical reach, side-shift, cushion tires, 5,132 hours (recorded on meter at time of listing), ENERGIC PLUS TSS-D 36/120 36V battery charger (may be sold separately), s/n A2BC1-21051

ALSO:

LARGE SELECTION OF BT 40 tool holders; tool cabinets with perishable tooling including drill, endmills, reamers, taps, carbine insert cutters, carbide insert boring bars, carbide inserts; machine tool accessories consisting of machine vises, rotary table, angle plates and indexing heads; hand tools, power tools and pneumatic tools; tool boxes; selection of inspection equipment, non-ferrous and ferrous raw materials including bar, tube and flat stock; MRO spare parts & MUCH MORE!