CORSTEEL IN-LINE SERVO
The Grinder/Slotter/Chamfer machine is a fully automated three-stage process designed to replace the three single operation machines needed to grind, slot, and chamfer brake pads. It is equipped wi...
CORSTEEL 300T
CORSTEEL AUTOMATIC
The Glue Machine is a machine with electrical, mechanical and pneumatic systems used to put beads of adhesive onto brake lining. This machine is designed to operate automatically with the exception...
CORSTEEL ID/OD
The ID/OD/OD machine complete with integrated paint and printing is a fully automated five-stage process designed to replace the single operation machines needed to produce a part finished to the s...
CORSTEEL VERTICAL
This vertical surface grinder is specifically designed to grind the surface of brake pads.
CORSTEEL 6 LITRE
This 12-liter mixer (total volume) is designed to be a self-contained single unit, capable of mixing up to 6 liters (working volume).
CORSTEEL 10 LITRE
This 20-liter mixer (total volume) is designed to be a self-contained single unit, capable of mixing up to 10 liters (working volume).
CORSTEEL 150 LITRE
This mixer has a total volume of 300L, and is capable of mixing up to 150 Litres of working volume. It is designed to be a self-contained single unit.
CORSTEEL 300 LITRE
This mixer has a working volume of 300 liters and is designed to be a self-contained single unit.
CORSTEEL 600 LITRE
The 316 U.S. (1,200 litres) gallon mixer (total volume) is designed to be a self contained single unit, capable of mixing up to 158 U.S. gallons (600 litres working volume).
CORSTEEL 1200 LITRE
The 2400 liters (631 U.S. gallon) mixer (total volume) is designed to be a self-contained single unit, capable of mixing up to 1200 liters (315 U.S. gallons working volume).
CORSTEEL 12T
This 12-Ton Custom C-Frame Press is designed to press hubs onto automotive water pumps. It is designed to close quickly, and then slow before striking the object being pressed to assemble the comp...
CORSTEEL 75T INVERTED DUAL
This 75 Ton Inverted Dual Layer Preformer is a four-post up-acting press designed specifically to preform loose material (friction and backing) into an accurate weight and easily handled "preform" ...
CORSTEEL 200T
This 200-Ton press is a four-post down-acting press designed specifically for the stamping industry. This system is also designed to work automatically without supervision with the exception of an...
CORSTEEL 1000T BONDING
The CORSTEEL CLUTCH BONDING PRESSES are designed to heat cure and bond the paper material to the clutch plates.
CORSTEEL 500T BONDING
The CORSTEEL CLUTCH BONDING PRESSES are designed to heat cure and bond the paper material to the clutch plates.
CORSTEEL 600T CURE
The 600-TON CURE PRESS is designed to reduce the labor associated with the handling of brake production molds.
CORSTEEL 900T CURE
The 900 TON CURE PRESS is designed to reduce the labor associated with the handling of brake production molds.
CORSTEEL 75T PERFORMER
This 75 Ton Preformer is a four-post down-acting press designed specifically to pre-shape loose material into an accurate weight/easily handled "preform" creating less dust and material separation ...
CORSTEEL 150T PERFORMER
This 150-Ton Preformer is a four-post down-acting press designed specifically to pre-shape loose material into an accurate weight with an easily handled "preform" creating less dust and material se...
CORSTEEL 75T DUAL PERFORMER
This 75 Ton Dual Layer Preformer is a four-post down-acting press designed specifically to pre-shape loose material (friction and backing) into an accurate weight and easily handled "preform" creat...
CORSTEEL UMC-254
This positive mold press system is designed to transform loose fill friction material into brake parts bonded to the backing plates. The end product from this machine will be ready to enter the fin...
CORSTEEL UMC-440M
The 440M unit molding cell is a two-press work cell, with each press designed to operate with a 4-cavity mold at 40 tons per cavity.
CORSTEEL 160T DUAL
This 160 Ton Dual Layer Unit Molding Press is a 2 press modules machine. Each module is composed of 2 presses: A and B. Each press in turn is made up of four-pairs of individual 80 Tons hydraulic c...
CORSTEEL 35T
Trim Presses are used for the die-cast as well as the plastics industry. Models shown are standard production models, but customized options are available. Standard features include safety ratchets...
CORSTEEL HEAVY DUTY G/S/CH
This heavy duty Slotter/Chamfer/Grinder machine is designed to replace the three single operation machines needed to slot, chamfer, and grind brake pads.
CORSTEEL IN-LINE
This Grinder / Slotter machine is designed to replace the two single operation machines needed to slot and grind brake pads. Any of the two functions maybe performed independently of the other oper...
CORSTEEL SLOTTER
This Slotter machine is setup to center slot brake pads and perform a maximum of 1 slot per brake pad. Slot depth is adjustable depending on the customer’s specifications.
CORSTEEL SLOTTER-CHAMFER
The Slotter in this machine is setup to center slot brake pads and is designed to perform a maximum of 3 slots per brake pad. The Chamfer machine in turn is designed to chamfer compound and simple ...
CORSTEEL LEAK
This machine is designed to leak-test a section of tailpipe. This machine is capable of handling parts 17420-0D150, 17420-0D160, 17420-0D170, and 17410-0T080. This machine is equipped with air cyl...