Fancort's adjustable column pneumatic presses are designed for light assembly work from 2 to 1900 pounds of pressure. They have a small footprint, side-mounted controls and keyway for quickly mount...
Presses, Pneumatic
1 photo
FANCORT CL-100
FEATURES:
Three pairs of precision beveled cutting blades can ensure the board does not bend, or deform
Guide can be adjusted vertically to suit differenct LED boards
Depth between upper circular b...
Printed Circuit Board Equipment
1 photo
Video
FANCORT FD200V
(working area: FD200V (200X200mm)
Fancort offers a complete array of highly engineered robotic dispensing solutions. Our valves and controllers are manufactured in the USA and are integrated with ...
Dispensing Machines
1 photo
FANCORT FD300V
300X320mm
Fancort offers a complete array of highly engineered robotic dispensing solutions. Our valves and controllers are manufactured in the USA and are integrated with state of the art Janome ...
Dispensing Machines
1 photo
FANCORT FD400V
400x400mm
Fancort offers a complete array of highly engineered robotic dispensing solutions. Our valves and controllers are manufactured in the USA and are integrated with state of the art Janome ...
Dispensing Machines
1 photo
FANCORT NTP2
Ideal for removing tabs in hard to reach areas e.g., angles, curves, very small boards, etc.
Removes tabs without waste, and with minimal stress
Two opposing knives, with upper knife traveling ...
Printed Circuit Board Equipment
1 photo
FANCORT NTR-2
Single knife tab removal handles PCB thickness to .125”
•Standard knife measures .600” in length; blade thickness
available from .030” to .125”
•Standard knives remove tabs up to .240” in length
•C...
Printed Circuit Board Equipment
1 photo
Brochure
FANCORT PHM 1-1
Pulse Bonding/Hot Bar Equipment
Printed Circuit Board Equipment
1 photo
Brochure
FANCORT PHM 2-2
Pulse Bonding/Hot Bar Equipment
Printed Circuit Board Equipment
1 photo
Brochure
FANCORT PS-MR-1
Multiple knives remove up to seven nibs at one time
Cuts clean, with no damage to the board or components
Easy-to-adjust knives when changing setups
Pnuematically operated, foot-switch controlled
Q...
Printed Circuit Board Equipment
1 photo
FANCORT UNIX-413S
Mid-size soldering robot
For work up to 300mm x 275mm
Solder feeder with 5 stepping motor
Improve detection sensor of solder shortage
& jam
Integral onboard controller
Soldering Machines
1 photo
Video
FANCORT UNIX-414S
For work up to 400mm×365mm
Supports M-size PCBs
Solder feeder with 5 stepping motor
Improve detection sensor of solder shortage
& jam
Integral onboard controller
Soldering Machines
1 photo
Video
FANCORT VPD2-400
•Separate scored boards up to 16” in length
•Motorized lower knife with variable speed motor
•Guides on front for easy feeding
•Rugged aluminum casting
•Knives can be re-sharpened
Printed Circuit Board Equipment
1 photo
Brochure
FANCORT VPD3-1
•Motorized model separates panels up to 18”; 24”
•Program cut length and speed
•Light curtain for safety
•Other features same as VPD3-1M
•Foot switch operated; 110V
Printed Circuit Board Equipment
1 photo
Brochure
FANCORT VPD3-1M
•Separate scored boards up to 18” in length, and from .032” to
.100” thick
•VPD3-1M-600 separates panels up to 24” long
•Safely separate as close as .040” from score line
•Manually slide round knif...
Printed Circuit Board Equipment
1 photo
Brochure
FANCORT VPD5
•Two linear knives with powerful pneumatics and cam action
•Separates boards with parts as close as .020” (.5mm) from score line
•Operator “goof proof” and totally safe; blade gap set to thickness
...
Printed Circuit Board Equipment
1 photo
Brochure
FANCORT VPD5-500P
Designed to separate metallized boards with knives measuring 300mm. Boards longer than 330mm can be separated because the machine is open on both ends and boards can be fed through in more than one...
Printed Circuit Board Equipment
1 photo
FANCORT VPD5A-330
Designed to separate metallized boards up to 330mm in length; performance may vary depending on depth of score line and panel length.
When separating metallized circuit boards, it's critical that t...
