HEM WF190MRB-DC
The WF190MRB-DC is a powered double-miter band saw operated using a touch screen mounted in a pedestal control console and cuts miter angles 45ᵒ in one direction and up to 60ᵒ the other direction. ...
HEM WF190M
The WF190M band saw is designed to cut structural shapes and bundles efficiently using a fixed 9.2ᵒ canted blade. Operated with a touch-screen control mounted in a swing-away console it includes a ...
HEM WF190LM-DC
Wide Flange Band Saw Capacity: 44″ W x 25″ H Blade: 29’0″ x 2″ x .063″ Hydraulic Motor: 5 HP Motor: 15 HP Operation: Manual/Semi Automatic
HEM WF190LA-DC-C
Wide Flange Band Saw Capacity: 44″ W x 25″ H Bar-feed: 0-72″ (Multiple Index) Blade: 29’0″ x 2″ x .063″ Hydraulic Motor: 5 HP Motor: 15 HP Operation: Automatic
HEM WF190A
The WF190A Smart Saw includes a touch screen control mounted in a swing away console. The multi-index 48” twin ball-screw servo-driven bar-feed and bi-directional vises are standard. The 9.2ᵒ fixed...
HEM WF1827M
The WF1827M band saw is designed to cut structural shapes and bundles efficiently using a fixed 9.2ᵒ canted blade. Operated with a touch-screen control mounted in a swing-away console it includes a...
HEM WF1827A
The WF1827A Smart Saw includes a touch screen control mounted in a swing away console. The multi-index 48” twin ball-screw servo-driven bar-feed and bi-directional vises are standard. The 9.2ᵒ fixe...
HEM WF160M
The WF160M band saw is designed to cut structural shapes and bundles efficiently using a fixed 9.2ᵒ canted blade. Operated with a touch-screen control mounted in a swing-away console it includes a ...
HEM WF160LM-DC
Wide Flange Band Saw Capacity: 30″ W x 25″ H Blade: 26’9″ x 2″ x .063″ Hydraulic Motor: 5 HP Motor: 15 HP Operation: Manual/Semi-Automatic
HEM WF160LA-DC-C
Wide Flange Band Saw Capacity: 30″ W x 25″ H Bar-feed: 0-72″ (Multiple Index) Blade: 26’9″ x 2″ x .063″ Hydraulic Motor: 5 HP Motor: 15 HP Operation: Automatic
HEM WF160A
The WF160A Smart Saw includes a touch screen control mounted in a swing away console. The multi-index 48” twin ball-screw servo-driven bar-feed and bi-directional vises are standard. The 9.2ᵒ fixed...
HEM WF140HM-DC
Wide Flange Band Saw Capacity: 44″ W x 20″ H 21″ (Round) Blade: 28’6″ x 2″ x .063″ Hydraulic Motor: 2 HP Motor: 10 HP Operation: Manual/Semi Automatic
HEM WF130HM-DC
HEM WF130HA-DC-C
Wide Flange Band Saw Capacity: 27″ W x 18″ H Bar-feed: 0-72″ (Multiple Index) Blade: 21’10” x 1.5″ x .050″ Hydraulic Motor: 2 HP Motor: 10 HP Operation: Automatic
HEM VT200HM-60-CTS
The VT200HM-CTS band saw is operated by a touch screen control that is located in a swing-away console at the front of the saw and allows the operator to enter an angle and the arm will travel to t...
HEM VT200HM-60
HEM VT200HA-60-CTS
The VT200HA-60-CTS band saw is operated using a touch screen control that includes a material list and allows saving jobs for future use. A touch screen control operates the functions and the progr...
HEM VT200HA-60 TS
Vertical Band Saw Capacity: 25″ W x 36″ H Miter: 25″ W x 25″ @ 45° Miter: 25″ W x 17″@ 60° Bar-feed: 0-72″ (Multiple Index) Blade: 24’8″ x 2″ x .063″ Cant: 4° Fixed Hydraulic Motor: 5 HP Motor: 15...
HEM VT140HM-60-CTS
The V140 and VT140HM-60-CTS band saws vary from a vertical blade orientation on the V140 to a forward-canting blade on the VT140 version. The touch screen control, mounted in a swing-away console, ...
HEM VT140HA-60-CTS
The V140 and VT140HA-60-CTS are heavy-duty band saws only varying from a vertical blade orientation. The touch screen is mounted in a swing-away console. Jobs are stored in the PLC for later recall...
HEM VT120HM-60-CTS
The VT120HM-60-CTS miters up to 60ᵒ in both directions. The control console is located in a swing-away console at the front of the saw. A touch screen is used to operate the various functions on th...
HEM VT120HM-60
Vertical Band Saw Capacity: 18″ W x 24″ H Miter: 18″ W x 16″ left @ 45° Miter: 18″ W x 14.75″ right @ 45° Miter: 18″ W x 10″ left @ 60° Miter: 18″ W x 9″ right @ 60° Blade: 16’6″ x 1.25″ x .042″ C...
HEM VT120HA-60-CTS
The VT120HA-60-CTS miters to 60ᵒ in both directions. The saw can retain jobs by job number saving size and quantity. Included is the patented Cut Watcher® and the Blade Saver feature. The 48” hydra...
HEM VT120HA-60 TS
Vertical Band Saw Capacity: 18″ W x 24″ H Miter: 18″ W x 16″ left @ 45° Miter: 18″ W x 14.75″ right @ 45° Miter: 18″ W x 10″ left @ 60° Miter: 18″ W x 9″ right @ 60° Bar-feed: 0-48″ (Multiple Inde...
HEM VT100LM-60
The VT100LM-60 will miter up to 60ᵒ in both directions. A self-contained hydraulic system powers the full stroking vise, arm tilt, and guide arm. Functions are operated from a touch screen control ...
HEM VT100HLM-60-CTS
The VT100HLM-60-CTS miters up to 60ᵒ in both directions. The control console is located in a swing-away console at the front of the saw. A touch screen is used to operate the various functions on t...
HEM VT100HLM-60
Vertical Band Saw Capacity: 18″ W x 20.75″ H Miter: 18″ W x 14.25″ left @ 45° Miter: 18″ W x 14″ right @ 45° Miter: 18″ W x 9.75″ left @ 60° Miter: 18″ W x 6.75″ right @ 60° Blade: 15’6″ x 1.25″ x...
HEM VT100HLA-60-CTS
The VT100HLA-60-CTS is a fully automatic and programmable saw that will miter up to 60ᵒ in both directions Manual, Semi-Automatic, and Fully Automatic modes will save jobs for future using a touch ...
HEM VT100HLA-60 TS
Vertical Band Saw Capacity: 18″ W x 20.75″ H Miter: 18″ W x 14.25″ left @ 45° Miter: 18″ W x 14″ right @ 45° Miter: 18″ W x 9.75″ left @ 60° Miter: 18″ W x 6.75″ right @ 60° Bar-feed: 0-48″ (Multi...
HEM V200M
Vertical Band Saw Capacity: 25″ W x 36″ H Miter: 25″ W x 25″ @ 45° Blade: 20’6″ x 2″ x .063″ Hydraulic Motor: 5 HP Motor: 15 HP Operation: Manual/Semi-Automatic
HEM V200HM-CTS
The V200HM-CTS band saw is operated by a touch screen control that is located in a swing-away console at the front of the saw and allows the operator to enter an angle and the arm will travel to th...
HEM V140HM-60-CTS
The V140 and VT140HM-60-CTS band saws vary from a vertical blade orientation on the V140 to a forward-canting blade on the VT140 version. The touch screen control, mounted in a swing-away console, ...
HEM V140HM-60
Vertical Band Saw Capacity: 24″ W x 31″ H Miter: 24″ W x 21″ left @ 45° Miter: 24″ W x 21″ right @ 45° Miter: 24″ W x 13.5″ left @ 60° Miter: 24″ W x 13″ right @ 60° Blade: 20’0″ x 1.5″ x .050″ Hy...
HEM V140HA-60-CTS
The V140 and VT140HA-60-CTS band saws vary in vertical blade orientation on the V140 and forward-canting blade on the VT140. The touch screen control is mounted in a swing-away console and the PLC ...
HEM V140HA-60 TS
Vertical Band Saw Capacity: 24″ W x 31″ H Miter: 24″ W x 21″ left @ 45° Miter: 24″ W x 21″ right @ 45° Miter: 24″ W x 13.5″ left @ 60° Miter: 24″ W x 13″ right @ 60° Bar-feed: 0-48″ (Multiple Inde...
HEM V100LM-60
Vertical Band Saw Capacity: 18″ W x 22.25″ H Miter: 18″ W x 15.25″ left @ 45° Miter: 18″ W x 15.125″ right @ 45° Miter: 18″ W x 10.25″ left @ 60° Miter: 18″ W x 7.25″ right @ 60° Blade: 15’6″ x 1....
HEM V100LM-3
HEM SIDEWINDERE A-C
Horizontal Miter Band Saw Capacity: 16″ W x 12.75″ H Miter: 10″ W x 10″ left @ 45° Bar-feed: 0-24″ (Multiple Index) Blade: 13’6″ x 1″ x .035″ Motor: 3 HP Operation: Automatic
HEM SIDEWINDER M
The Sidewinder M saw cuts miters up to 60ᵒ in one direction and is ideal for cutting small solids and structural shapes. The control allows semi-automatic sawing with the Cutting Force, adjustable ...
HEM SIDEWINDER A-4
Product Description The Sidewinder A-4 cuts 45ᵒ miters in one direction and is perfect for cutting small solids and shapes. With a 24” indexing bar-feed and up to 4 indexes, cutting multiple parts ...
HEM SIDEWINDER A-1
Horizontal Miter Capacity: 16″ W x 12.75″ H Miter: 10″ W x 10″ left @ 45° Bar-feed: 0-24″ (Single Index) Blade: 13’6″ x 1″ x .035″ Motor: 3 HP Operation: Automatic
HEM PS-18-144A
HEM NG160
The NG160 benchtop band saw is powered by a 2.7 HP variable speed motor. It will cut miter angles up to 45ᵒ in one direction. The NG160 uses a ½” wide blade, is a manual pull-down saw, and includes...
HEM NG120XL
The NG120XL band saw is our most popular benchtop model and miter-cuts up to 60ᵒ in one direction, is powered by a 1.7 HP variable speed motor, and includes a hard-stop for cutting multiple parts t...
HEM N215XL
Utility Band Saw Capacity: 7.7″ W x 5″ H 6.6″ (Round) Miter: 5.9″ W x 4.3″ left @ 45° Miter: 3.9″ W x 2.9″ left @ 60° Blade: 7’0-1/4″ x .75″ x .035″ Operation: Manual
HEM KTC-70EH
HEM KTC-150SP
The KTC-150SP carbide sawing machine is controlled with a touch screen interface. The saw head is driven by a servo motor and the hydraulics are hard-plumbed for more consistent operation. An autom...
HEM KTC-130SP
HEM KTC-100NF
The KTC-100NF automatic carbide sawing machine cuts non-ferrous material. The saw head is servo-motor driven and the hydraulics are hard-plumbed for consistent operation. Automatic workpiece loadin...
HEM KTC-100EH
Product Description The KTC-100EH is operated with a touch screen control console. The saw head is fed with a servo motor for dynamic entry and exit and the hydraulics are hard-plumbed for more con...