Make your own spin collars in minutes. Just cut galvanized stock (24 gauge & lighter) to width and length, set the diameter from 4" to 16", and push the blank against the automatic stop. A synchron...
Roll Formers
1 photo
ISM LOCKFORMER ROUND/OVAL PIPE 9STA
Pre-curl 24–30 gauge, Uses approximately 1-9/16" material for both sides. The 14, 16 and 18 gauge Pittsburgh rollforming machines have 7 formingstations with two forming positions. One inboard posi...
Roll Formers
1 photo
ISM LOCKFORMER ROUND/OVAL PIPE 7STA
Uses approximately 1-9/16" material for both sides. 24-30 gauge capacity. The 14, 16 and 18 gauge Pittsburgh rollforming machines have 7 forming stations with two forming positions. One inboard pos...
Roll Formers
1 photo
ISM LOCKFORMER ROTO-MAX 175
The Roto-Max 175 is a new generation edgeforming machine for mass production of chimney and round fittings. The Roto-Max 175 is unique to other rotary machines with its “SmartSwage” microprocessor ...
Edgers
1 photo
ISM LOCKFORMER ROTO-MAX 125
The Roto-Max Line is a new generation edge forming machine for mass production of chimney and round fittings.
Edgers
1 photo
ISM LOCKFORMER ROLLER-MAX 800
The Roller Max 800 is an automatic rollformer designed to support high-speed production of round metal parts. The Roller Max 800 produces parts with diameters ranging from 3"-40" and up to 20 gauge...
Roll Formers
1 photo
ISM LOCKFORMER OVAL-MAX ROLLER 4
The Oval-Max Roller 4 is used to produce round and oval fittings on material up to 20 gauge and up to 40" wide. This machine’s control panel allows for easy operator entry of part parameters.
Roll Formers
1 photo
ISM LOCKFORMER OVAL-MAX 1.25
For all of your oval requests, ISM by Lockformer introduces the Oval-Max 1.25.
The Oval-Max 1.25 offers a full touch screen PLC combined with independent cylinders that stretch material at differe...
Pipe Expanders
1 photo
ISM LOCKFORMER MAX-FLANGE 2.7
ISM by Lockformer offers the MAX-FLANGE 2.7 with incredible versatility in one forming machine. It’s so diverse it can form either straight angle or hemmed angle with up to a 2” (50mm) flange heig...
Flangers
1 photo
ISM LOCKFORMER MAX-EXPAND
30-14 gauge, 4"-10" STD diameter and 12"-48" option. The Max-Expand Machine is used for widening pipes of V2A and V4A Stainless Steel for chimney, drain and ventilation pipes. This machine has an a...
Pipe Expanders
1 photo
ISM LOCKFORMER MAX-CLOSE 25.15
The Max-Close 25.15 Seam Closer is designed to produce a recumbent fold in the production of air ducts. The Max-Close
features a quick change-over from inside to outside seams. This functional mach...
Tube Machinery (Forming)
1 photo
ISM LOCKFORMER MAX STITCH 1.0
20 gauge capacity
3"-40" diameter range
Welders, Pipe & Tube
1 photo
ISM LOCKFORMER GORE-MAX 1.25 GORELOCKER
On a single machine platform, ISM’s Gore-Max 1.25 is your quality, efficient and cost-effective solution to the production of elbows, reducers, end caps and off sets. ISM’s easy-to-operate Gore-Ma...
Elbow Machines
1 photo
ISM LOCKFORMER D-MAX 2.0
28–14 gauge capacity
3"-100" diameter range
287 FPM speed
Tube Machinery (Forming)
1 photo
ISM LOCKFORMER D-MAX 1.2HS
28–18 gauge capacity
3" - 64" diameter range
332 FPM
Tube Machinery (Forming)
1 photo
ISM LOCKFORMER D-MAX 1.2E
The D-Max 1.2E is a revolutionary Automatic Spiral Tubeformer that combines the most advanced technology with one of the smallest footprints in the industry! Unlike other compact models, the D-Max ...
Tube Machinery (Forming)
1 photo
ISM LOCKFORMER COLLARMAKER
Notch, bead, crimp & roll in one pass!
Save time and money by combining notching, beading, crimping and rolling in one operation.
For complete round starting collars 3 to 14 inches in diameter ou...
Crimpers
1 photo
ISM LOCKFORMER ANGLE-MAX 1.6-13
Up to 16 gauge
Roll Formers
1 photo
ISM LOCKFORMER ANGLE-MAX 1.6-10
The Angle-Max 1.6 machine is used to produce angle stock for flat oval and round flanges.
Producing 90° angles from coil stock, the Angle Max also automatically cuts to a desired length, and featu...