ITALMAC DTI 450
Double mitre cutting-off machine with automatic right head movable by a numeric control. Pneumatic tilting of both heads external cuts 90°, 45°. Sawblade diam. 450 mm available with maximum cutting...
ITALMAC FDM-1
Drilling machine with two electro spindles and manual clamp to carry out multiple drilling operations on the posts of aluminium profiles for 90° coupling operations on the band and the plinth. Equi...
ITALMAC INT 2800
Horizontal electro-pneumatic milling/end-milling machine designed to carry out end-milling operations on aluminium profiles. The machine is equipped with an automatic feeding system and an out-of-f...
ITALMAC INT 7000
Horizontal electro-pneumatic milling/end-milling machine designed to carry out end-milling operations on aluminium profiles. The machine is equipped with an automatic feeding system and an out-of-f...
ITALMAC ITM 500 C
3-Axis controlled double mitre saw cutting-off machine, automatic traversing of the moving cutting head on slide ways and roller packs. Internal and external tilting of both heads. Any angle betwee...
ITALMAC ITM 600 C
3-Axis controlled double mitre saw cutting-off machine, automatic traversing of the moving cutting head on slide ways and roller packs. Internal and external tilting of both heads. Any angle betwee...
ITALMAC MANTA 550 E
Single head electro pneumatic cutting-off machine with hidden blade, automatic tilting and blade feeding designed to carry out cuts at 20° right and left. Electronic controlled positioning system t...
ITALMAC NOVA 500 C
Double mitre cutting-off machine with automatic right head movable by numeric control. External pneumatic tilting of both heads to 90°, 45°, 22°30’ with mechanical stops for intermediate degrees. S...
ITALMAC NOVA 500 P
Double mitre cutting-off machine with automatic right head movable by numeric control. External pneumatic tilting of both heads to 90°, 45°, 22°30’ with mechanical stops for intermediate degrees. S...
ITALMAC NOVA 600 C
Double mitre cutting-off machine with automatic right head movable by numeric control. External pneumatic tilting of both heads to 90°, 45°, 22°30’ with mechanical stops for intermediate degrees. S...
ITALMAC NOVA 600 P
Double mitre cutting-off machine with automatic right head movable by numeric control. External pneumatic tilting of both heads to 90°, 45°, 22°30’ with mechanical stops for intermediate degrees. S...
ITALMAC ONIX 3 AXIS 3.3
ITALMAC PEGASO 3-4 4.0
ITALMAC ZETA 400
Single head electro pneumatic cutting-off machine with hidden blade, pneumatic tilting and manual feeding. Atomized pneumatic lubrication. Designed to carry out cuts at 90° – 45° right and left, 20...
ITALMAC ZETA 450 A
Single head electro pneumatic cutting-off machine with hidden blade, automatic tilting and blade feeding designed to carry out cuts at 20° right and left and intermediate degrees on aluminium profi...
ITALMAC ZETA 550 A
Atomized pneumatic lubrication. Equipped with: • No. 1 550 mm cutting blade • No. 2 horizontal clamps to block the profile • Service keys • 220-380 V 50 Hz three-phase engine Accessories: • Blade...
ITALMAC ZETA AS 400
Rising single head electro pneumatic cutting-off machine with hidden blade and manual tilting and feeding. Atomized pneumatic lubrication. Designed to carry out cuts at 90° – 45° right and left, 20...