LAGUNA MDP1750002

• RPM: Variable from 200-2600 RPM • Table: 13.5" x 13.5" Pivoting • Chucks: 1/2" Keyed Chuck • Travel: 3"

LAGUNA DS|16 DUST SEPARATOR

DS|16 Dust Separator Specifications -Huge 16 Gallon Capacity -99% Separation -Less than 1% Into Your Existing Vacuum -Filter stays cleaner, lasts longer, performs better -360 Swiveling casters make...

LAGUNA CIRCULATOR" SHOP AIR FILTER

"Circulator" Shop Air Filter - 1400CFM 110V 1PH Specs Motor: 1/3 HP 110 Volt CFM: 1400 Timer: 2, 4, 6, 8H + Infinite Outer Filter: 5 Micron Inner Filter: 1 Micron Noise Rating (L-M-H): 61.1, 62.3, ...

LAGUNA MOBILE CYCLONE

Mobile Cyclone Dust Collector 1.5HP 110V Man. Clean Canister Specs Motor: 1.5 HP TEFC 110V 60Hz 1 Phase 20 Amp breaker Filter: Spun-bond polyester - Filters 99.9% of particles to 1 micron Cleaning...

LAGUNA 2 HP MOBILE CYCLONE

2 hp Mobile Cyclone Dust Collector - Manual filter cleaning Specs Motor: 2HP TEFC Voltage: 220V 1 Phase Recommended Breaker: 20 Amp. Suction: 1600 CFM-11” Static Pressure Inlet Diameter: 6" with 4...

LAGUNA 3 HP BAG CYCLONE

3 hp Bag Cyclone Dust Collector Specs MDC0690-0145 Motor: 3 HP TEFC - 1ph Suction: 2200 CFM - 16.1" Static pressure Inlet: 8" inlet - 3 x 4" splitter included Footprint: 67"L x 45"W x 91"H Capac...

LAGUNA 3 HP MOBILE CYCLONE

3 hp Mobile Cyclone Dust Collector Specs MDC0680-0145 Motor: 3 HP TEFC - 1ph Filter: Spun-bond polyester - Filters 99.9% of particles to 1 micron Suction: 2200 CFM - 16.2" Static pressure Inlet: ...

LAGUNA 4.5 HP CYCLONE

4.5 hp Cyclone Dust Collector Specs MDC1200-0145 2 stage dust collector with auto cleaning cycle 4.5 HP - 1 Phase 220 Volts BALDOR MOTOR CFM: 3350 Maximum static pressure: 16" Inlet diameter:...

LAGUNA 10HP CYCLONE

10HP Cyclone Dust Collector Specs Motor power: 10 Hp 220 volts 3 phase 60 Hz Impeller size: 16" double walled welded steel CFM: 6000 CFM Maximum static pressure: 17" Inlet size: 13" or 5 ports 4" ...

LAGUNA PLATINUM SERIES CURVE EDGEBANDER

Platinum Series Curve Edgebander Specs MEB8100-0190 Work Table Dimensions: 28.5" x 39.5" Overall Dimensions: 60" x 38" Working Height: 34.5" Table Tilt: 90 - 40 degrees Edgebanding Thickness: ...

LAGUNA PLATINUM SERIES EDGE TRIMMING MACHINE

Platinum Series Edge Trimming Machine Specifications MEB 4300-0060 Main Worktable Dimensions: 29.5" x 35.5" Main Worktable Height: 34.5" End-trim Table Dimensions: 15" x 20" Overall Dimensions:...

LAGUNA BANDIT 3/2

Bandit 3/2 Edgebander Specs ●Power: 220 Volt, 1 phase 40 Amp ●Compressed Air Required: 87 PSI Clean dry air ●Tape Thickness (min-max): 0.4 mm - 2 mm ●In-feed Fence: Heated ●Glue Tank Capacity: 30 o...

LAGUNA BANDIT 4/8

Bandit 4/8 Edgebander Specifications Minimum Panel Width: 2.36" Minimum Panel Length: 4.7" Panel Thickness: 10mm to 60mm Feed Speed: 36 to 48 ft/min Size (L x W x H): 149" x 39" x 71" Weight: 3,6...

LAGUNA BANDIT 4/3

Bandit 4/3 Edgebander Specifications Motor: 220 Volt, 3 phase, 60 Hz. Total HP Installed: 9 Min. Tape Thickness: 0.4mm Max. Tape Thickness: 3mm Feed Speed: 26 Ft/Min. Feed System: Track Feed Max. P...

LAGUNA BANDIT 2/3

Bandit 2/3 Edgebander Specs • Motor: 220 Volt, 1 phase, 60 Hz. • Total HP Installed: 9 • Min. Tape Thickness: 0.4mm • Max. Tape Thickness: 3mm • Feed Speed: 26 Ft/Min. • Feed System: Track Feed • ...

LAGUNA SMARTSHOP LASER | CBX

Laguna CBX fiber laser cutting system designed and optimized for quick and reliable precision cutting of ferrous and nonferrous metals. The CBX is extremely easy to run and maintain. The compact fo...

LAGUNA SMARTSHOP LASER | FC

The Laguna SmartShop® Laser|FC boasts a HiPerformance IPG fiber laser, paired with an ultra-rigid frame and gantry. Promoting accuracy and high-speed processing, the FC is available with multiple p...

LAGUNA SMARTSHOP LASER | DLP

The SmartShop® DLP Fiber Laser has the power and precision of our FC Laser with the addition of our pipe cutting system. Fitting pipes from 20mm – 200mm with lengths up to 20ft. The DLP’s many powe...

LAGUNA REVO 10X16

Revo 10x16 Mini Lathe Specs Specifications Revo 10-16 • HP: 1/2 • Voltage: 110 • Motor Amp: 3 • Digital Readout • 2-1/2" Tailstock Travel • Electronic Variable Speed • Swing: 5" Turning Capacity: 1...

LAGUNA CNC TURNER

Our CNC 3 Axis Turner is able to make incredibly detailed spindles. The resolution is 0.0003. The machine is powered by a Liquid-Cooled 3HP spindle capable of running very long run times without ov...

LAGUNA SMART SHOP 3 + 2

LAGUNA PLATINUM SERIES HORIZONTAL BANDSAW

Platinum Series Horizontal Bandsaw- MBAND284200 Specifications Max Workpiece size: 16"(W) x 16"(H) Feed belt Dimensions: 12" x 216" Flywheel diameter: 28" Blade length: 180" Blade width: 1.5",...

LAGUNA 1412 BANDSAW

Two years in the making, Laguna is finally ready to introduce the 14|Twelve. This is Laguna’s first foray into the 110 Volt segment. The result is an uncompromised feat. Features include pyramid ...

LAGUNA 14 SUV BANDSAW

LT14 x 14 SUV Bandsaw Specs: Motor: 3HP Leeson Volt: 220 1 phase Recommended Breaker: 30 Amp. Min-Max blade width: 1/8”-1” Resaw Capacity: 14” Throat: 13 ¼” Blade Length: 125” Foot-brake w. Micro S...

LAGUNA ITALIAN LT37 BANDSAW

Italian LT37 Bandsaw Specs Motor: 15 hp Baldor Resaw: 24 " Volts: 220 3ph Amp Breaker: 50 / 3 Min. Blade: 1/4" Max. Blade: 2 " Throat: 36" Table Size: 31" x 50 " Blade Length: 261 " Table...

LAGUNA ITALIAN LT24 X 24 BANDSAW

Italian LT24 x 24 Bandsaw Specs Motor: 6 hp Baldor Resaw: 24 " Volts: 220 Amp Breaker: 40 / 1 - 40 / 3 Min. Blade: 1/8" Max. Blade: 1-1/2" Throat: 23-1/4 " Table Size: 24 " x 34-1/2" Blade ...

LAGUNA ITALIAN LT24 X 17 BANDSAW

Italian LT24 x 17 Bandsaw Specs Motor: 6 hp Baldor Resaw: 17-5/8" Volts: 220 Amp Breaker: 40 / 1 - 40 / 3 Min. Blade: 1/8" Max. Blade: 1-1/2" Throat: 23 1/4" Table Size: 24" x 34-1/2" Blade...

LAGUNA ITALIAN RESAW MASTER BANDSAW

Italian Resaw Master Bandsaw Specifications NOW with 18" Resaw Capacity! Motor: 6 hp Baldor Resaw: 18" Volts: 220 Amp Breaker: 35 Min. Blade: 3/4" Max. Blade: 2 " Throat: 17" Table Size: 19" x 2...

LAGUNA ITALIAN LT20 BANDSAW

Italian LT20 Bandsaw Specs Motor: 6 hp Baldor Resaw: 20-3/8" Volts: 220 Amp Breaker: 40 Min. Blade: 1/8" Max. Blade: 1-3/8" Throat: 19" Table Size: 19" x 25" Blade Length: 176" Table Height: 35" Ra...

LAGUNA ITALIAN LT18 BANDSAW

Italian LT18 Bandsaw Specs: Motor: 4.5 hp Baldor Resaw: 18-3/8" Volts: 220 Amp Breaker: 40 Min. Blade: 1/16" Max. Blade: 1-3/8" Throat: 16-1/2" Table Size: 19" x 25 " Blade Length: 158" Tab...

LAGUNA ITALIAN LT16 HD BANDSAW

Italian LT16 HD Bandsaw Specs: Motor: 4.5 hp Baldor Resaw: 16-3/8" Volts: 220 Amp Breaker: 40 Min. Blade: 1/16" Max. Blade: 1-3/8" Throat: 15 1/2" Table Size: 16-1/2" x 22-3/4" Blade Length: 150" T...

LAGUNA 8" PARALLELOGRAM JOINTER SHEARTEC II

8" Parallelogram Jointer ShearTec II Specs Motor: 3hp / 3,450rpm Cutting Capacity: Width: 8" Depth: 1/2" Rabbetting Capacity: 1/2" Cutterhead: Speed: 5200 rpm Spiral Cutter Head: Yes Diameter: ...

LAGUNA J16 JOINTER

J16 Jointer Specifications MG00003 Table Width 16" Table Length 102" Infeed Table Length 53" Outfeed Table Length 43" Fence Size 53" x 6 1/2" Table Height 35" Max. Depth of Cut 5/16" Cutte...

LAGUNA INDUSTRIAL SERIES 16" JOINTER

Industrial Series 16" Jointer 5HP 1phase Specs MJO6405-0800 Table length: 98" Jointer Width: 16" Table Height: 31-1/2" Parallelogram Adjustments Jointer Fence Tilt: 90 - 45 degrees Motor: 5 HP ...

LAGUNA 12" PARALLELOGRAM JOINTER SHEARTEC LL

12" Parallelogram Jointer Sheartec ll Specs Motor: 5HP. 220V. 60HZ. 1PH Cutting Capacity: Width: 12" Depth: 1/2" Rabbetting Capacity: 3/4" Rows of ShearTec II Knives: 6 Number of Knives: 84 Cut...

LAGUNA 8" WEDGEBED JOINTER SHEARTEC II

8" Wedgebed Jointer ShearTec II Specs MJO2100-0120 Motor: 2 HP TFEC Table: 71" x 9" Cut Capacity: 1/8" Rabbeting: 1/2" Fence: 39-3/4" x 4-3/4" Fence Tilt: 90 - 45 degrees Cutterhead: Shear-T...

LAGUNA 6" WEDGEBED JOINTER SHEARTEC II

6" Wedgebed Jointer ShearTec II Specs German Carbide Inserts Number of Knives: 42 Cutterhead RPM: 5500 Fence Dimension: 29" X 4" Fence Tilt: + - 45 degrees Built-in Casters Motor: 1.5 HP 110 volts

LAGUNA 6" WEDGEBED JOINTER STANDARD KNIVES

6" Wedgebed Jointer Standard Knives Specs MJO2000-0120 Motor: 1.5 HP motor 110 volts Table Length: 55.7" Cutterhead: Straight knives. Cutterhead Speed: 5,200 rpm Fence Dimension: 29" x 4" Fe...

LAGUNA REVO 24-36 LATHE

Revo 24-36 Lathe Specs Specifications Revo 24-36 • Motor Type: TEFC Induction Motor • Motor Power: 3HP, 220 Volt, 1 Phase w/Delta Variable Frequency Drive • Reversible • Recommended Breaker: 30 ...

LAGUNA PINNACLE LATHE

Pinnacle Lathe Specs MTP105 Turning capacity: 24 Turning capacity/bridge removed: 48 Distance between centers: 52 3 HP Motor 220-volt single or 3-phase Weight: 1500 lbs Head stock thread (ada...

LAGUNA CL1200 LATHE

CL1200 Lathe Specs Max Distance Between Centers: 46" Max Copying Length: 40" Max Depth of Copying: 2.5" Max Diameter: 8.5" Morse Taper Centers: MK2 Thread Size: 33mm x 3.5 Speeds: 500 / 1,000 ...

LAGUNA REVO 20-36 LATHE

Revo 20-36 Lathe Specs • Voltage: 220 volt, 1 phase • HP: 2 • Motor: TEFC Induction Motor • VFD: Delta Variable Frequency Drive • Reversible • Recommended Breaker: 30 Amp • Swing Over Bed: 20" • Di...

LAGUNA PLATINUM SERIES 18-47 LATHE

Platinum Series 18-47 Lathe Specs Motor: 2.0 hp Variable Speed: yes Spindle Speed Range - Low: 100 - 1200 rpm High: 200- 3200 rpm Swing Over Bed: 18" Distance Between Centers: 47" Headstock ...

LAGUNA PLATINUM SERIES 16-43 LATHE

Platinum Series 16-43 Lathe Specs Motor: 1.5 HP TFEC Voltage: 110 Volt Swing Over Bed: 16" Distance Between Center: 43" RPM Range: 600 - 2400 RPM Spindle: 1-1/4" x 8 TPI Head and Tailstock Ta...

LAGUNA PLATINUM SERIES 16" JOINTER / PLANER COMBINATION W/ SPIRAL CUTTERS

Platinum Series 16" Jointer / Planer Combination w/ Spiral Cutters Specs Motor: 4 HP Jointer Table Size: 16" x 63" Planer Table Size: 16" x 30" Feed Roller Diameter: 1 1/2" Cutterhead: Shear-Te...

LAGUNA PLATINUM SERIES DOVETAIL MACHINE

Platinum Series Dovetail Machine Specs Model: MDO0232-0050 Thickness of Tenon: 1/8" - 2-23/64" Width of Tenon: 15/64" - 23/32" Depth of Tenon: 25/64" - 1-3/16" Cutter Bit Vertical Adj. 1-3/16"...

LAGUNA LAGUNA 46 BORING MACHINE

Laguna 46 Boring Machine Specifications Min distance between heads: 7.25" Max distance between heads: 24" Motors: 2 US made Baldor 3hp 60Hz Number of spindles: 46 Distance between bits: 32mm Tota...

LAGUNA PLATINUM SERIES LINE AND CONSTRUCTION BORING MACHINE

Platinum Series Line and Construction Boring Machine Specifications MLB0450-0060 Motor 2 HP - 220 volt - 3 phase Spindles 21 (11 R / 10 L) Head tilt 0 90º (Pneumatic) Main fence 10 w/ 4 flip-...

LAGUNA M15 V BORING MACHINE

M15 V Boring Machine Specifications MLB0200-0400 Spindel N: 15 Distance Between Spindle: 1 1/4" Distance Between 1st & Last: 17 5/8" Suited Drill Length: 2-1/4" , 3-5/16" Maximum Boring Depth: 2 ...

LAGUNA PLATINUM SERIES 10" 5 FUNCTION COMBINATION MACHINE W/ SPIRAL CUTTERS

Platinum Series 10" 5 Function Combination Machine w/ Spiral Cutters Specs MCO05000 Jointer/Planer Maximum Planer: 10" Motor: 2 hp Cutting knife: Spiral (Shear-Tec) Maximum Thickness: 7" Tablesaw M...