1 - 50 of 252 Machines
Model / DescriptionTypePrice
thumb

ACER 3 AXIS

Millers, Vertical
Used Acer 3-Axis CNC Vertical Mill. Unit is in good shape and can be seen under power as needed. Options include: Proto TRAK MX-3 CNC control, variable speed spindle, and misc collets/ tooling. Please contact Brian Foerster at 847-800-4494 with any and all questions.
United States
3 photos
$7,700.00 USD
thumb

ACER 3 AXIS

Millers, Vertical
Used Acer 3-Axis CNC Vertical Mill. Unit is in good shape and can be seen under power as needed. Options include: Proto TRAK MX-3 CNC control, variable speed spindle, and misc collets/ tooling. Please contact Brian Foerster at 847-800-4494 with any and all questions.
United States
3 Photos
$7,700.00 USD
Millers, Vertical
$7,700.00 USD
thumb

ACRA AM-3VAC

Millers, Vertical
2009 Acra AM3V VAC Mill. Machine is in excellent condition and can be seen under power on our showroom floor. Machine comes with: power drawbar, Sony digital read out, auto lube, and power feed on the X axis. Please contact Brian Foerster at 847-800-4494 with any and all questions.
Illinois, United States
9 photos
Year: 2009
$4,950.00 USD
thumb

ACRA AM-3VAC

Millers, Vertical
2009 Acra AM3V VAC Mill. Machine is in excellent condition and can be seen under power on our showroom floor. Machine comes with: power drawbar, Sony digital read out, auto lube, and power feed on the X axis. Please contact Brian Foerster at 847-800-4494 with any and all questions.
Illinois, United States
9 Photos
Year: 2009
$4,950.00 USD
Millers, Vertical
$4,950.00 USD
thumb

ADDISON DB32

Benders, Pipe, Tube & Bar
1996 Addison DB32 3 Axis CNC Horizontal Tube Bending Machine. Unit is in good shape and can be viewed under power as needed. Options include: 3 axis CNC bender control system with touch screen, mandrel extractor, pressure die assist, direct acting pressure die, drop away type clamp die, pneumat...
United States
3 photos
Attachment
Year: 1996
thumb

ADDISON DB32

Benders, Pipe, Tube & Bar
1996 Addison DB32 3 Axis CNC Horizontal Tube Bending Machine. Unit is in good shape and can be viewed under power as needed. Options include: 3 axis CNC bender control system with touch screen, mandrel extractor, pressure die assist, direct acting pressure die, drop away type clamp die, pneumat...
United States
3 Photos
Attachment
Year: 1996
Benders, Pipe, Tube & Bar
thumb

AMERA SEIKI A-1

Drilling & Tapping Centers
2006 Amera Seiki A1 Drill and Tap Center. Machine is in good shape and can be inspected under power as needed. Options include: Mitsubishi 64SM CNC control, 600 meters of memory, RISC processor, built in tool holder shelves, spindle orientation, and automatic pallet changer. Please contact: ...
United States
3 photos
Year: 2006
$27,500.00 USD
thumb

AMERA SEIKI A-1

Drilling & Tapping Centers
2006 Amera Seiki A1 Drill and Tap Center. Machine is in good shape and can be inspected under power as needed. Options include: Mitsubishi 64SM CNC control, 600 meters of memory, RISC processor, built in tool holder shelves, spindle orientation, and automatic pallet changer. Please contact: ...
United States
3 Photos
Year: 2006
$27,500.00 USD
Drilling & Tapping Centers
$27,500.00 USD
thumb

AMERA SEIKI T-310MC

Lathes, CNC
2004 Amera Seiki T-310MC CNC Turning Center With Live Tooling. Machine is in good shape and can be inspected under power as needed. Options include: Fanuc 21iT control, 12" chuck, live tool capability, Royal FX300 filtermist, chip conveyor, miscl static and live holders, and coolant tank/ pump....
Illinois, United States
6 photos
Year: 2004
$10,001 - $50,000 USD
thumb

AMERA SEIKI T-310MC

Lathes, CNC
2004 Amera Seiki T-310MC CNC Turning Center With Live Tooling. Machine is in good shape and can be inspected under power as needed. Options include: Fanuc 21iT control, 12" chuck, live tool capability, Royal FX300 filtermist, chip conveyor, miscl static and live holders, and coolant tank/ pump....
Illinois, United States
6 Photos
Year: 2004
$10,001 - $50,000 USD
Lathes, CNC
$10,001 - $50,000 USD
thumb

ARBURG 420A

Injection Molding Machines
2007 Arburg 420A Two Shot Plastic Injection Molder. Machine is in very good condition and can be viewed under power as needed. Machine comes with: Selogica control, HKO, core pull, and Weber rotary platen included. Please contact: Bob Nelson at 847-921-3845, Brian Foerster at 847-800-4494, o...
United States
9 photos
Year: 2007
Over $100,001 USD
thumb

ARBURG 420A

Injection Molding Machines
2007 Arburg 420A Two Shot Plastic Injection Molder. Machine is in very good condition and can be viewed under power as needed. Machine comes with: Selogica control, HKO, core pull, and Weber rotary platen included. Please contact: Bob Nelson at 847-921-3845, Brian Foerster at 847-800-4494, o...
United States
9 Photos
Year: 2007
Over $100,001 USD
Injection Molding Machines
Over $100,001 USD
thumb

BIGLIA B565YS

Lathes, CNC
2011 Biglia B565YS "Y" Axis Live Tool Turning Center. Machine is in great shape and can be viewed under power as needed. Options include: Fanuc 32iB control, parts catcher, barfeed interface, chip conveyor, tool presetter, parts conveyor, and 2 color alarm tower. Please contact: Fanuc 32iB c...
United States
9 photos
Year: 2011
Over $100,001 USD
thumb

BIGLIA B565YS

Lathes, CNC
2011 Biglia B565YS "Y" Axis Live Tool Turning Center. Machine is in great shape and can be viewed under power as needed. Options include: Fanuc 32iB control, parts catcher, barfeed interface, chip conveyor, tool presetter, parts conveyor, and 2 color alarm tower. Please contact: Fanuc 32iB c...
United States
9 Photos
Year: 2011
Over $100,001 USD
Lathes, CNC
Over $100,001 USD
thumb

BRIDGEPORT SERIES II

Millers, Vertical
Used Bridgeport Series II Special Vertical Mill With Digital Read Out. Machine is in great shape and can be viewed under power as needed. Machine comes with: 2 Axis Anilam digital read out, X axis power feed, Z axis air assist, and 2 HP variable drive head. Please contact Brian Foerster at 84...
Illinois, United States
7 photos
thumb

BRIDGEPORT SERIES II

Millers, Vertical
Used Bridgeport Series II Special Vertical Mill With Digital Read Out. Machine is in great shape and can be viewed under power as needed. Machine comes with: 2 Axis Anilam digital read out, X axis power feed, Z axis air assist, and 2 HP variable drive head. Please contact Brian Foerster at 84...
Illinois, United States
7 Photos
Millers, Vertical
thumb

BROTHER SPEEDIO S700X1

Machining Centers, Vertical
2015 Brother Speedio S700X1 CNC Vertical Machining Center With Yasda JNC-170L Rotary Table. Machine is in excellent condition and can be inspected under power as needed. Options include: Brother C00 CNC control, 300 PSI thru spindle coolant, high speed machining (Advanced Motion), Yasda JNC 17...
United States
6 photos
Year: 2015
$72,900.00 USD
thumb

BROTHER SPEEDIO S700X1

Machining Centers, Vertical
2015 Brother Speedio S700X1 CNC Vertical Machining Center With Yasda JNC-170L Rotary Table. Machine is in excellent condition and can be inspected under power as needed. Options include: Brother C00 CNC control, 300 PSI thru spindle coolant, high speed machining (Advanced Motion), Yasda JNC 17...
United States
6 Photos
Year: 2015
$72,900.00 USD
Machining Centers, Vertical
$72,900.00 USD
thumb

BROWN & SHARPE MICROVAL PFX DCC

Coordinate Measuring Machines
Rebuilt Brown and Sharp Microval DCC Coordinate Measuring Machine. Unit is in excellent condition and can be inspected under power as needed. Machine was just completely rebuilt. Please contact Bob Nelson at 847-921-3845 with any and all questions.
Illinois, United States
1 photo
$30,000.00 USD
thumb

BROWN & SHARPE MICROVAL PFX DCC

Coordinate Measuring Machines
Rebuilt Brown and Sharp Microval DCC Coordinate Measuring Machine. Unit is in excellent condition and can be inspected under power as needed. Machine was just completely rebuilt. Please contact Bob Nelson at 847-921-3845 with any and all questions.
Illinois, United States
1 Photo
$30,000.00 USD
Coordinate Measuring Machines
$30,000.00 USD
thumb

BULLARD CUTMASTER 36

Boring Mills, Vertical (incld VTL)
1952 36" Bullard Cutmaster Vertical Turret Lathe. Machine is in good shape and can be viewed under power as needed. Machine comes with a 36" chuck, 5 position turret, and side head. Please contact Kurt Dahlberg at 989-233-9886 with any and all questions.
United States
1 photo
Year: 1952
thumb

BULLARD CUTMASTER 36

Boring Mills, Vertical (incld VTL)
1952 36" Bullard Cutmaster Vertical Turret Lathe. Machine is in good shape and can be viewed under power as needed. Machine comes with a 36" chuck, 5 position turret, and side head. Please contact Kurt Dahlberg at 989-233-9886 with any and all questions.
United States
1 Photo
Year: 1952
Boring Mills, Vertical (incld VTL)
thumb

CHARMILLES ROBOFORM 20

EDM Sinkers
1995 Charmilles RoboForm 20 CNC Sinker EDM. Machine is in good shape and can be viewed under power as needed. Options include: Charmilles CNC control, Walker magnetic chuck, Erowa head, 3R head (in box), on board programming, built in dieletric tank and filter, 4 position automatic toolchanger...
United States
7 photos
Year: 1995
$16,000.00 USD
thumb

CHARMILLES ROBOFORM 20

EDM Sinkers
1995 Charmilles RoboForm 20 CNC Sinker EDM. Machine is in good shape and can be viewed under power as needed. Options include: Charmilles CNC control, Walker magnetic chuck, Erowa head, 3R head (in box), on board programming, built in dieletric tank and filter, 4 position automatic toolchanger...
United States
7 Photos
Year: 1995
$16,000.00 USD
EDM Sinkers
$16,000.00 USD
thumb

CHARMILLES ROBOFORM 30

EDM Sinkers
1997 Charmilles RoboForm 30 Sinker EDM With Erowa Tooling Package. Machine is in good shape and can be inspected under power as needed. Options include: Charmilles control, 16 position automatic toolchanger, Advantage chiller, magnetic chuck, SHP dust collection system, and a Huge Erowa toolin...
United States
6 photos
Year: 1997
$31,900.00 USD
thumb

CHARMILLES ROBOFORM 30

EDM Sinkers
1997 Charmilles RoboForm 30 Sinker EDM With Erowa Tooling Package. Machine is in good shape and can be inspected under power as needed. Options include: Charmilles control, 16 position automatic toolchanger, Advantage chiller, magnetic chuck, SHP dust collection system, and a Huge Erowa toolin...
United States
6 Photos
Year: 1997
$31,900.00 USD
EDM Sinkers
$31,900.00 USD
thumb

CHARMILLES ROBOFORM 4000

EDM Sinkers
1992 Charmilles RoboForm 4000 CNC Sinker EDM. Machine is in good shape and can be viewed under power as needed. Machine comes with: Charmilles CNC control, updated 2006 LCD monitor, updated software, "C" axis, adjustable through head flushing, coolant flushing, vect burn, 20 position automatic...
United States
9 photos
Video
Year: 1992
$10,001 - $50,000 USD

CHARMILLES ROBOFORM 4000

EDM Sinkers
1992 Charmilles RoboForm 4000 CNC Sinker EDM. Machine is in good shape and can be viewed under power as needed. Machine comes with: Charmilles CNC control, updated 2006 LCD monitor, updated software, "C" axis, adjustable through head flushing, coolant flushing, vect burn, 20 position automatic...
United States
9 Photos
Year: 1992
$10,001 - $50,000 USD
EDM Sinkers
$10,001 - $50,000 USD
thumb

CHEVALIER 2040VMC

Machining Centers, Vertical
2002 Chevalier 2040 VMC CNC Vertical Machining Center. Machine is in good shape and can be inspected under power. Options include: 24 position side mount toolchanger and an Anilam 6000M conversational control. Please contact: Bob Nelson at 847-921-3845, Brian Foerster at 847-800-4494, or Cris ...
Illinois, United States
4 photos
Year: 2002
thumb

CHEVALIER 2040VMC

Machining Centers, Vertical
2002 Chevalier 2040 VMC CNC Vertical Machining Center. Machine is in good shape and can be inspected under power. Options include: 24 position side mount toolchanger and an Anilam 6000M conversational control. Please contact: Bob Nelson at 847-921-3845, Brian Foerster at 847-800-4494, or Cris ...
Illinois, United States
4 Photos
Year: 2002
Machining Centers, Vertical
thumb

CHEVALIER FM32SP

Millers, Vertical
1998 Chevalier FM32SP CNC 3 Axis Vertical Mill. Machine is in very good condition and can be inspected under power. Options include: Anilam 3200MK CNC control, work light, coolant system, and miscl toolholders. Please contact: Brian Foerster at 847-800-4494, Brian Foerster at 847-921-3845, o...
United States
7 photos
Year: 1998
$7,800.00 USD
thumb

CHEVALIER FM32SP

Millers, Vertical
1998 Chevalier FM32SP CNC 3 Axis Vertical Mill. Machine is in very good condition and can be inspected under power. Options include: Anilam 3200MK CNC control, work light, coolant system, and miscl toolholders. Please contact: Brian Foerster at 847-800-4494, Brian Foerster at 847-921-3845, o...
United States
7 Photos
Year: 1998
$7,800.00 USD
Millers, Vertical
$7,800.00 USD
thumb

CINCINNATI MILACRON 8C

Lathes, CNC
1989 Cincinnati Milacron Cinturn 8C CNC Chucker. Machine is in good functional condition and can be inspected under power as needed. Options include: Acramatic 850 control, chip conveyor, 8" 3 jaw chuck, tool presetter, miscl toolholders, and manuals. Please contact Brian Foerster at 847-800-4...
United States
3 photos
Year: 1989
thumb

CINCINNATI MILACRON 8C

Lathes, CNC
1989 Cincinnati Milacron Cinturn 8C CNC Chucker. Machine is in good functional condition and can be inspected under power as needed. Options include: Acramatic 850 control, chip conveyor, 8" 3 jaw chuck, tool presetter, miscl toolholders, and manuals. Please contact Brian Foerster at 847-800-4...
United States
3 Photos
Year: 1989
Lathes, CNC
thumb

CINCINNATI MILACRON ARROW 1250

Machining Centers, Vertical
1998 Cincinnati Arrow 1250 CNC Vertical Machining Center. Machine is in very good condition and can be viewed under power as needed. Options include: Acramatic 2100E PC based CNC control, remote jog handle, 4th axis wiring, RS-232 port, 3.5" floppy drive, and coolant tank/ pump. Please contac...
United States
9 photos
Year: 1998
$10,001 - $50,000 USD
thumb

CINCINNATI MILACRON ARROW 1250

Machining Centers, Vertical
1998 Cincinnati Arrow 1250 CNC Vertical Machining Center. Machine is in very good condition and can be viewed under power as needed. Options include: Acramatic 2100E PC based CNC control, remote jog handle, 4th axis wiring, RS-232 port, 3.5" floppy drive, and coolant tank/ pump. Please contac...
United States
9 Photos
Year: 1998
$10,001 - $50,000 USD
Machining Centers, Vertical
$10,001 - $50,000 USD
thumb

CINCINNATI MILACRON VH-600-54

Injection Molding Machines
1996 Cincinnati Magna VH-600-54 (68 OZ) Horizontal Injection Molding Machine. Options include: Camac 486 control, hydraulic mold clamping, spare 54 OZ screw and barrel assembly, 68 OZ barrier screw with barrel and spring loaded nizzle is new, and air blow. Please contact Aaron Levin at 480-371-...
United States
3 photos
Year: 1996
thumb

CINCINNATI MILACRON VH-600-54

Injection Molding Machines
1996 Cincinnati Magna VH-600-54 (68 OZ) Horizontal Injection Molding Machine. Options include: Camac 486 control, hydraulic mold clamping, spare 54 OZ screw and barrel assembly, 68 OZ barrier screw with barrel and spring loaded nizzle is new, and air blow. Please contact Aaron Levin at 480-371-...
United States
3 Photos
Year: 1996
Injection Molding Machines
thumb

CITIZEN BL12

Automatic Screw Machines, Swiss Type
2000 Citizen BL12 CNC Fixed Headstock Lathe With 12' IKuri Seiki Bartop Barfeeder. Unit is in good shape and can be inspected under power as needed. Options include: Fanuc 21i control, 12' Ikuri Seiki bartop barfeeder, and, splash guards. Machine has only used cutting oil and no water soluble ...
Illinois, United States
7 photos
Year: 2000
thumb

CITIZEN BL12

Automatic Screw Machines, Swiss Type
2000 Citizen BL12 CNC Fixed Headstock Lathe With 12' IKuri Seiki Bartop Barfeeder. Unit is in good shape and can be inspected under power as needed. Options include: Fanuc 21i control, 12' Ikuri Seiki bartop barfeeder, and, splash guards. Machine has only used cutting oil and no water soluble ...
Illinois, United States
7 Photos
Year: 2000
Automatic Screw Machines, Swiss Type
thumb

CITIZEN L20

Automatic Screw Machines, Swiss Type
1992 Citizen L20 CNC Swiss Type Turning Center With Sub-Spindle and "Y" Axis. Unit is in good shape and can be viewed under power as needed. Machine comes with: Mitsubishi Meldas 500 control, Cool Blaster high pressure coolant system, "Y" axis, sub-spindle, back working attachment, and parts ca...
United States
4 photos
Video
Year: 1992

CITIZEN L20

Automatic Screw Machines, Swiss Type
1992 Citizen L20 CNC Swiss Type Turning Center With Sub-Spindle and "Y" Axis. Unit is in good shape and can be viewed under power as needed. Machine comes with: Mitsubishi Meldas 500 control, Cool Blaster high pressure coolant system, "Y" axis, sub-spindle, back working attachment, and parts ca...
United States
4 Photos
Year: 1992
Automatic Screw Machines, Swiss Type
thumb

CITIZEN L32

Automatic Screw Machines, Swiss Type
1999 Citizen L32 CNC Swiss Type Turning Center With Sub-Spindle and "Y" Axis. Machine is in good shape and can be inspected under power as needed. Options include: Mitsubishi Meldas 500 control, Iemca 432 12' bar feeder, 2000 PSI thru spindle coolant, "Y" axis, sub-spindle, backworking attachme...
United States
1 photo
Year: 1999
thumb

CITIZEN L32

Automatic Screw Machines, Swiss Type
1999 Citizen L32 CNC Swiss Type Turning Center With Sub-Spindle and "Y" Axis. Machine is in good shape and can be inspected under power as needed. Options include: Mitsubishi Meldas 500 control, Iemca 432 12' bar feeder, 2000 PSI thru spindle coolant, "Y" axis, sub-spindle, backworking attachme...
United States
1 Photo
Year: 1999
Automatic Screw Machines, Swiss Type
thumb

CLAUSING STORM 100A

Lathes, CNC
1996 Clausing Storm 100A CNC Turning Center With Tailstock. Machine is in good shape and can be viewed under power as needed. Options include: Fanuc OT control, 3J collet chuck, tailstock, chip conveyor, LNS 12' 6.45 Hydrodynamic barfeed, and Miscl toolholders. Please contact: Bob Nelson at 84...
United States
1 photo
Year: 1996
thumb

CLAUSING STORM 100A

Lathes, CNC
1996 Clausing Storm 100A CNC Turning Center With Tailstock. Machine is in good shape and can be viewed under power as needed. Options include: Fanuc OT control, 3J collet chuck, tailstock, chip conveyor, LNS 12' 6.45 Hydrodynamic barfeed, and Miscl toolholders. Please contact: Bob Nelson at 84...
United States
1 Photo
Year: 1996
Lathes, CNC
thumb

CLAUSING STORM 100A

Lathes, CNC
1996 Clausing Storm 100A CNC Turning Center With Tailstock. Machine is in good shape and can be inspected under power as needed. Options include: Fanuc OT control, 3J collet chuck, tailstock, chip conveyor, LNS 6.45 Hydrodynamic barfeed (12'), and miscl toolholders. Please contact: Bob Nelson ...
Illinois, United States
1 photo
Year: 1996
thumb

CLAUSING STORM 100A

Lathes, CNC
1996 Clausing Storm 100A CNC Turning Center With Tailstock. Machine is in good shape and can be inspected under power as needed. Options include: Fanuc OT control, 3J collet chuck, tailstock, chip conveyor, LNS 6.45 Hydrodynamic barfeed (12'), and miscl toolholders. Please contact: Bob Nelson ...
Illinois, United States
1 Photo
Year: 1996
Lathes, CNC
thumb

CONTROL LASER PROWRITER L80

Laser Markers
2006 Control Laser Prowriter L-80 Lamp Pumped Laser Marking Machine. Unit is in good shape and can be inspected under power. Machine will come with: CNC control, sealed laser module with ceramic reflectors, laser safety shutter, laser marking studio software, integrated computer based controlle...
United States
2 photos
Year: 2006
thumb

CONTROL LASER PROWRITER L80

Laser Markers
2006 Control Laser Prowriter L-80 Lamp Pumped Laser Marking Machine. Unit is in good shape and can be inspected under power. Machine will come with: CNC control, sealed laser module with ceramic reflectors, laser safety shutter, laser marking studio software, integrated computer based controlle...
United States
2 Photos
Year: 2006
Laser Markers
thumb

DAEWOO DMV 5025-50

Machining Centers, Vertical
2005 Daewoo DMV 5025 50 Taper CNC Vertical Machining Center. Machine is in good condition and can be inspected under power as needed. Options include: Fanuc 21IMB CNC control, 30 position side mount toolchanger, thru spindle coolant, rigid tap, spindle chiller, and chip conveyor. Please conta...
United States
5 photos
Year: 2005
$59,900.00 USD
thumb

DAEWOO DMV 5025-50

Machining Centers, Vertical
2005 Daewoo DMV 5025 50 Taper CNC Vertical Machining Center. Machine is in good condition and can be inspected under power as needed. Options include: Fanuc 21IMB CNC control, 30 position side mount toolchanger, thru spindle coolant, rigid tap, spindle chiller, and chip conveyor. Please conta...
United States
5 Photos
Year: 2005
$59,900.00 USD
Machining Centers, Vertical
$59,900.00 USD
thumb

DAEWOO DMV-3016D

Machining Centers, Vertical
2004 Daewoo DMV 3016D CNC Vertical Machining Center. Machine is in good shape and can be inspected under power as needed. Options include: Fanuc OiMC control, rigid tap, remote jog handle, coolant tank/ pump, and all available manuals. Please contact: Bob Nelson at 847-921-3845, Brian Foers...
United States
3 photos
Year: 2004
thumb

DAEWOO DMV-3016D

Machining Centers, Vertical
2004 Daewoo DMV 3016D CNC Vertical Machining Center. Machine is in good shape and can be inspected under power as needed. Options include: Fanuc OiMC control, rigid tap, remote jog handle, coolant tank/ pump, and all available manuals. Please contact: Bob Nelson at 847-921-3845, Brian Foers...
United States
3 Photos
Year: 2004
Machining Centers, Vertical
thumb

DAEWOO DMV-4020

Machining Centers, Vertical
2005 Daewoo DMV 4020 CNC Vertical Machining Center. Machine is in good condition and can be inspected under power as needed. Options include: Fanuc 21iMB CNC control, spindle air blow, spindle orientation, rigid tap, custom macro B, work light, and chip conveyor. Please contact: Bob Nelson a...
United States
6 photos
Video
Year: 2005
$32,500.00 USD

DAEWOO DMV-4020

Machining Centers, Vertical
2005 Daewoo DMV 4020 CNC Vertical Machining Center. Machine is in good condition and can be inspected under power as needed. Options include: Fanuc 21iMB CNC control, spindle air blow, spindle orientation, rigid tap, custom macro B, work light, and chip conveyor. Please contact: Bob Nelson a...
United States
6 Photos
Year: 2005
$32,500.00 USD
Machining Centers, Vertical
$32,500.00 USD
thumb

DAEWOO LYNX 220LC

Lathes, CNC
2005 Daewoo Lynx 220LC CNC Turning Center With Tailstock and ATS ML-565 6' Magazine Barfeed. Machine is in very good condition and can be viewed under power as needed. Options include: Fanuc CNC control, 8" chuck, programmable tailstock, chip conveyor, tool setter, parts catcher (missing baske...
Illinois, United States
5 photos
Year: 2005
$26,500.00 USD
thumb

DAEWOO LYNX 220LC

Lathes, CNC
2005 Daewoo Lynx 220LC CNC Turning Center With Tailstock and ATS ML-565 6' Magazine Barfeed. Machine is in very good condition and can be viewed under power as needed. Options include: Fanuc CNC control, 8" chuck, programmable tailstock, chip conveyor, tool setter, parts catcher (missing baske...
Illinois, United States
5 Photos
Year: 2005
$26,500.00 USD
Lathes, CNC
$26,500.00 USD
thumb

DAEWOO LYNX 220LC

Lathes, CNC
2005 Daewoo Lynx 220LC CNC Turning Center With Tailstock. Machine is in very good condition and can be viewed under power as needed. Options include: Fanuc CNC control, 8" chuck, programmable tailstock, chip conveyor, tool setter, parts catcher (missing basket), miscl toolholders, and coolant ...
Illinois, United States
4 photos
Year: 2005
$23,500.00 USD
thumb

DAEWOO LYNX 220LC

Lathes, CNC
2005 Daewoo Lynx 220LC CNC Turning Center With Tailstock. Machine is in very good condition and can be viewed under power as needed. Options include: Fanuc CNC control, 8" chuck, programmable tailstock, chip conveyor, tool setter, parts catcher (missing basket), miscl toolholders, and coolant ...
Illinois, United States
4 Photos
Year: 2005
$23,500.00 USD
Lathes, CNC
$23,500.00 USD
thumb

DAEWOO MYNX 530

Machining Centers, Vertical
2001 Daewoo Mynx 530 CNC Vertical Machining Center. Machine is in good condition and can be inspected under power upon request. Machine has box ways, rigid tap, and Fanuc OiM control. Please contact Mark Lipowski at 224-465-6465 with any and all questions.
Illinois, United States
5 photos
Year: 2001
thumb

DAEWOO MYNX 530

Machining Centers, Vertical
2001 Daewoo Mynx 530 CNC Vertical Machining Center. Machine is in good condition and can be inspected under power upon request. Machine has box ways, rigid tap, and Fanuc OiM control. Please contact Mark Lipowski at 224-465-6465 with any and all questions.
Illinois, United States
5 Photos
Year: 2001
Machining Centers, Vertical
thumb

DAEWOO MYNX-500

Machining Centers, Vertical
2000 Daewoo Mynx 500 CNC Vertical Machining Center. Machine is in good condition and can be inspected under power as needed. Options include: Fanuc 21M CNC control, rigid tap, and box ways. Please contact: Bob Nelson at 847-921-3845, Brian Foerster at 847-800-4494, or Cris Mulvihill at 602-50...
Illinois, United States
1 photo
Year: 2000
thumb

DAEWOO MYNX-500

Machining Centers, Vertical
2000 Daewoo Mynx 500 CNC Vertical Machining Center. Machine is in good condition and can be inspected under power as needed. Options include: Fanuc 21M CNC control, rigid tap, and box ways. Please contact: Bob Nelson at 847-921-3845, Brian Foerster at 847-800-4494, or Cris Mulvihill at 602-50...
Illinois, United States
1 Photo
Year: 2000
Machining Centers, Vertical
thumb

DAEWOO MYNX-500

Machining Centers, Vertical
2000 Daewoo Mynx 500 CNC Vertical Machining Center With 4th Axis SMW Rotary Table. Machine is in good shape and can be inspected under power as needed. Options include: Fanuc 21M control, SMW 4th axis rotary table with tailstock, 4th axis prewire, and remote jog handle.. Please contact Cris M...
United States
8 photos
Video
Year: 2000

DAEWOO MYNX-500

Machining Centers, Vertical
2000 Daewoo Mynx 500 CNC Vertical Machining Center With 4th Axis SMW Rotary Table. Machine is in good shape and can be inspected under power as needed. Options include: Fanuc 21M control, SMW 4th axis rotary table with tailstock, 4th axis prewire, and remote jog handle.. Please contact Cris M...
United States
8 Photos
Year: 2000
Machining Centers, Vertical
thumb

DAEWOO PUMA 230C

Lathes, CNC
2001 Daewoo Puma 230C CNC Turning Center With Programmable Tailstock. Machine is in good shape and can be viewed under power as needed. Options include: RS-232 port, barfeed interface, automatic tool setter, programmable tailstock, and 10" hydraulic chuck. Please contact Cris Mulvihill at 602...
United States
5 photos
Year: 2001
$29,900.00 USD
thumb

DAEWOO PUMA 230C

Lathes, CNC
2001 Daewoo Puma 230C CNC Turning Center With Programmable Tailstock. Machine is in good shape and can be viewed under power as needed. Options include: RS-232 port, barfeed interface, automatic tool setter, programmable tailstock, and 10" hydraulic chuck. Please contact Cris Mulvihill at 602...
United States
5 Photos
Year: 2001
$29,900.00 USD
Lathes, CNC
$29,900.00 USD
thumb

DAEWOO PUMA 240LB

Lathes, CNC
2003 Daewoo Puma 240LB CNC Turning Center With Programmable Tailstock. Machine is in good shape and can be viewed under power as needed. Options include: Fanuc i series CNC control, auto door, M & H probing, toolsetter, and programmable hydraulic tailstock. Please contact: Bob Nelson at 847-...
United States
5 photos
Year: 2003
$27,500.00 USD
thumb

DAEWOO PUMA 240LB

Lathes, CNC
2003 Daewoo Puma 240LB CNC Turning Center With Programmable Tailstock. Machine is in good shape and can be viewed under power as needed. Options include: Fanuc i series CNC control, auto door, M & H probing, toolsetter, and programmable hydraulic tailstock. Please contact: Bob Nelson at 847-...
United States
5 Photos
Year: 2003
$27,500.00 USD
Lathes, CNC
$27,500.00 USD
thumb

DAEWOO PUMA 350LMA

Lathes, CNC
1998 Daewoo Puma 350 LMA CNC Long Bed Turning Center With Live Tooling and Programmable Tailstock. Machine is in good shape and can be viewed under power as needed. Options include: Fanuc 18T CNC control, 15" chuck, live tooling, programmable tailstock, optional long bed (85.4" between centers...
United States
7 photos
Year: 1998
$33,900.00 USD
thumb

DAEWOO PUMA 350LMA

Lathes, CNC
1998 Daewoo Puma 350 LMA CNC Long Bed Turning Center With Live Tooling and Programmable Tailstock. Machine is in good shape and can be viewed under power as needed. Options include: Fanuc 18T CNC control, 15" chuck, live tooling, programmable tailstock, optional long bed (85.4" between centers...
United States
7 Photos
Year: 1998
$33,900.00 USD
Lathes, CNC
$33,900.00 USD
thumb

DAEWOO PUMA TT2000SY

Lathes, CNC (5-Axis or More)
2005 Daewoo Puma TT2000SY Twin Spindle, Twin Turret, CNC Lathe, W/ Live Tool Capabilty, Sub-Spindle, and "Y" Axis. Machine is in very good condition and can be viewed under power as needed. Machine comes with: Fanuc 18it control, 8" chuck (left/ Right spindle), chip conveyor, live tool capabil...
Illinois, United States
10 photos
Year: 2005
Over $100,001 USD
thumb

DAEWOO PUMA TT2000SY

Lathes, CNC (5-Axis or More)
2005 Daewoo Puma TT2000SY Twin Spindle, Twin Turret, CNC Lathe, W/ Live Tool Capabilty, Sub-Spindle, and "Y" Axis. Machine is in very good condition and can be viewed under power as needed. Machine comes with: Fanuc 18it control, 8" chuck (left/ Right spindle), chip conveyor, live tool capabil...
Illinois, United States
10 Photos
Year: 2005
Over $100,001 USD
Lathes, CNC (5-Axis or More)
Over $100,001 USD
thumb

DECKEL MAHO DMC 125 FD DUOBLOCK

Machining Centers, Universal
2007 DMG DMC 125FD Universal Machining Center. Machine is in very good condition and can be inspected under power as needed. Options include: 3D Millplus IT CNC control, chip conveyor, rotating view glass, chip flusher, filtering unit, 580 PSI thru spindle coolant, coolant tank, and 60 positio...
United States
9 photos
Year: 2007
thumb

DECKEL MAHO DMC 125 FD DUOBLOCK

Machining Centers, Universal
2007 DMG DMC 125FD Universal Machining Center. Machine is in very good condition and can be inspected under power as needed. Options include: 3D Millplus IT CNC control, chip conveyor, rotating view glass, chip flusher, filtering unit, 580 PSI thru spindle coolant, coolant tank, and 60 positio...
United States
9 Photos
Year: 2007
Machining Centers, Universal
thumb

DMC DT 32CD

Drilling & Tapping Centers
2013 DMC DT32CD CNC Drill and Tap Center. Machine is in very good condition and can be inspected under power as needed. Options include: Fanuc OiMD CNC control, RS-232 port, USB port, Ethernet connection port, prepped for through spindle coolant, "Big Plus" BT30 spindle, machine work light, au...
United States
5 photos
Year: 2013
$49,500.00 USD
thumb

DMC DT 32CD

Drilling & Tapping Centers
2013 DMC DT32CD CNC Drill and Tap Center. Machine is in very good condition and can be inspected under power as needed. Options include: Fanuc OiMD CNC control, RS-232 port, USB port, Ethernet connection port, prepped for through spindle coolant, "Big Plus" BT30 spindle, machine work light, au...
United States
5 Photos
Year: 2013
$49,500.00 USD
Drilling & Tapping Centers
$49,500.00 USD
thumb

DMG MORI DMU 60 EVO

Machining Centers, Universal
2014 DMG Mori DMU 60 EVO 5 Axis Vertical Machining Center. Machine is in great shape and can be viewed under power as needed. Options include: Celos Siemen 840D CNC control, NC rotary table with swivel axis, 60 station automatic toolchanger, 18000 RPM HSK A63 spindle, infrared measuring probe ...
United States
8 photos
Year: 2014
Over $100,001 USD
thumb

DMG MORI DMU 60 EVO

Machining Centers, Universal
2014 DMG Mori DMU 60 EVO 5 Axis Vertical Machining Center. Machine is in great shape and can be viewed under power as needed. Options include: Celos Siemen 840D CNC control, NC rotary table with swivel axis, 60 station automatic toolchanger, 18000 RPM HSK A63 spindle, infrared measuring probe ...
United States
8 Photos
Year: 2014
Over $100,001 USD
Machining Centers, Universal
Over $100,001 USD
thumb

DMG MORI DMU-65 MONOBLOCK

Machining Centers, Vertical, (5-Axis or More)
2013 DMG Mori DMU 65 Monoblock 5 Axis Vertical Machining Center. Machine is in very good condition and can be inspected under power as needed. Options include: Hedenhain iTNC 530 HSCI CNC, NC swivel rotary table, 60 position automatic toolchanger, cooling air blast, electronics handwheel iTNC ...
United States
4 photos
Year: 2013
thumb

DMG MORI DMU-65 MONOBLOCK

Machining Centers, Vertical, (5-Axis or More)
2013 DMG Mori DMU 65 Monoblock 5 Axis Vertical Machining Center. Machine is in very good condition and can be inspected under power as needed. Options include: Hedenhain iTNC 530 HSCI CNC, NC swivel rotary table, 60 position automatic toolchanger, cooling air blast, electronics handwheel iTNC ...
United States
4 Photos
Year: 2013
Machining Centers, Vertical, (5-Axis or More)
thumb

DOOSAN Z280-TM

Lathes, CNC (5-Axis or More)
2000 Doosan Mecatec Z280TM Twin Spindle,, Twin Turret, Sub-spindle, Live Tool CNC Turning Center. Machine is in good shape and can be inspected under power as needed. Machine comes with: Fanuc 18T CNC control, sub-spindle w/ full "C" axis, live tooling, twin turret, tool setter, parts catcher,...
Illinois, United States
9 photos
Video
Year: 2000

DOOSAN Z280-TM

Lathes, CNC (5-Axis or More)
2000 Doosan Mecatec Z280TM Twin Spindle,, Twin Turret, Sub-spindle, Live Tool CNC Turning Center. Machine is in good shape and can be inspected under power as needed. Machine comes with: Fanuc 18T CNC control, sub-spindle w/ full "C" axis, live tooling, twin turret, tool setter, parts catcher,...
Illinois, United States
9 Photos
Year: 2000
Lathes, CNC (5-Axis or More)
thumb

EMAG VL 3

Lathes, CNC
2004 EMAG VL-3 CNC Inverted Turning Center. Machine is in good shape and can be inspected under power as needed. Machine comes with: Fanuc 18iTB CNC control, automatic parts loader with conveyor, chip conveyor, high pressure pump and filter, coolant chiller unit, 12 position turret, collet chu...
Illinois, United States
10 photos
Year: 2004
$39,900.00 USD
thumb

EMAG VL 3

Lathes, CNC
2004 EMAG VL-3 CNC Inverted Turning Center. Machine is in good shape and can be inspected under power as needed. Machine comes with: Fanuc 18iTB CNC control, automatic parts loader with conveyor, chip conveyor, high pressure pump and filter, coolant chiller unit, 12 position turret, collet chu...
Illinois, United States
10 Photos
Year: 2004
$39,900.00 USD
Lathes, CNC
$39,900.00 USD
thumb

ENGEL ES7000/750

Injection Molding Machines
1999 Engel ES7000/750H CNC Plastic Injection Molder. Unit is in very good condition and can be inspected under power as needed. Options include: CC100 control, retrofit for new Moog pilot valve, high speed accumulator package for injection, SPI, and air blow. Please contact: Cris Mulvihill at ...
United States
8 photos
Year: 1999
thumb

ENGEL ES7000/750

Injection Molding Machines
1999 Engel ES7000/750H CNC Plastic Injection Molder. Unit is in very good condition and can be inspected under power as needed. Options include: CC100 control, retrofit for new Moog pilot valve, high speed accumulator package for injection, SPI, and air blow. Please contact: Cris Mulvihill at ...
United States
8 Photos
Year: 1999
Injection Molding Machines
thumb

ENSHU VMC 40

Machining Centers, Vertical
Used Enshu VMC 40 3 Axis CNC Vertical Machining Center. Machine is good shape and can be inspected under power as needed. Options include: Fanuc O-M control, 20 side mount toolchanger, remote handwheel, and coolant tank and pump. Please contact: Bob Nelson at 847-921-3845, Brian Foerster at 84...
Illinois, United States
5 photos
$10,001 - $50,000 USD
thumb

ENSHU VMC 40

Machining Centers, Vertical
Used Enshu VMC 40 3 Axis CNC Vertical Machining Center. Machine is good shape and can be inspected under power as needed. Options include: Fanuc O-M control, 20 side mount toolchanger, remote handwheel, and coolant tank and pump. Please contact: Bob Nelson at 847-921-3845, Brian Foerster at 84...
Illinois, United States
5 Photos
$10,001 - $50,000 USD
Machining Centers, Vertical
$10,001 - $50,000 USD
thumb

EPILOG FIBERMARK 1300

Laser Markers
2014 Epilog Fibermark 1300 Laser Marking Machine. Unit includes: 20 watt fiber laser, rotary device, exhaust fan, programming software, and all available manuals. Please contact Dave Deano at 630-689-6293 with any and all questions.
Illinois, United States
6 photos
thumb

EPILOG FIBERMARK 1300

Laser Markers
2014 Epilog Fibermark 1300 Laser Marking Machine. Unit includes: 20 watt fiber laser, rotary device, exhaust fan, programming software, and all available manuals. Please contact Dave Deano at 630-689-6293 with any and all questions.
Illinois, United States
6 Photos
Laser Markers
thumb

FADAL VMC-15

Machining Centers, Vertical
1998 Fadal VMC 15 CNC Vertical Machining Center. Machine is in very good condition and can be inspected under power as needed. Machine comes with: Fadal 88HS CNC control, 7500 RPM spindle, and all available manuals. Please contact Dave Deano at 630-689-6293 with any and all questions.
Illinois, United States
7 photos
Year: 1998
thumb

FADAL VMC-15

Machining Centers, Vertical
1998 Fadal VMC 15 CNC Vertical Machining Center. Machine is in very good condition and can be inspected under power as needed. Machine comes with: Fadal 88HS CNC control, 7500 RPM spindle, and all available manuals. Please contact Dave Deano at 630-689-6293 with any and all questions.
Illinois, United States
7 Photos
Year: 1998
Machining Centers, Vertical
thumb

FADAL VMC-15XT

Machining Centers, Vertical
1997 Fadal VMC 15XT CNC Vertical Machining Center. Machine is in good condition and can be viewed under power as needed. Please contact: Bob Nelson at 847-921-3845, Brian Foerster at 847-800-4494, or Cris Mulvihill at 602-501-8995 with any and all questions.
Illinois, United States
1 photo
Year: 1997
$12,500.00 USD
thumb

FADAL VMC-15XT

Machining Centers, Vertical
1997 Fadal VMC 15XT CNC Vertical Machining Center. Machine is in good condition and can be viewed under power as needed. Please contact: Bob Nelson at 847-921-3845, Brian Foerster at 847-800-4494, or Cris Mulvihill at 602-501-8995 with any and all questions.
Illinois, United States
1 Photo
Year: 1997
$12,500.00 USD
Machining Centers, Vertical
$12,500.00 USD
thumb

FADAL VMC-15XT

Machining Centers, Vertical
1996 Fadal VMC 15XT CNC Vertical Machining Center. Machine is in good shape and can be viewed under power as needed. Options include: CNC 88HS CNC control, rigid tap, and coolant tank/ pump. Please contact: Bob Nelson at 847-921-3845, Brian Foerster at 847-800-4494, or Cris Mulvihill at 602-...
United States
3 photos
Year: 1996
$10,500.00 USD
thumb

FADAL VMC-15XT

Machining Centers, Vertical
1996 Fadal VMC 15XT CNC Vertical Machining Center. Machine is in good shape and can be viewed under power as needed. Options include: CNC 88HS CNC control, rigid tap, and coolant tank/ pump. Please contact: Bob Nelson at 847-921-3845, Brian Foerster at 847-800-4494, or Cris Mulvihill at 602-...
United States
3 Photos
Year: 1996
$10,500.00 USD
Machining Centers, Vertical
$10,500.00 USD
thumb

FADAL VMC-3016L

Machining Centers, Vertical
2001 Fadal VMC 3016L CNC Vertical Machining Center. Machine is in good shape and comes out of a job shop environment. Options include: Fadal 32 MP CNC control, rigid tap, 3.5" floppy drive, and the coolant tank/ pump (I know, I know....not really an option!). Please contact: Bob Nelson at 847-...
Illinois, United States
4 photos
Year: 2001
$10,001 - $50,000 USD
thumb

FADAL VMC-3016L

Machining Centers, Vertical
2001 Fadal VMC 3016L CNC Vertical Machining Center. Machine is in good shape and comes out of a job shop environment. Options include: Fadal 32 MP CNC control, rigid tap, 3.5" floppy drive, and the coolant tank/ pump (I know, I know....not really an option!). Please contact: Bob Nelson at 847-...
Illinois, United States
4 Photos
Year: 2001
$10,001 - $50,000 USD
Machining Centers, Vertical
$10,001 - $50,000 USD