BAILEIGH SN-F04-MS
If you are looking for a little more capacity from your corner notcher, try the SN-F04-MS sheet metal corner notcher from Baileigh Industrial. The SN-F04-MS is great for making perfect corners in m...
BAILEIGH SN-F09-MS
The SN-F09-MS sheet metal corner notcher from Baileigh Industrial is the perfect machine for making those perfect corners in that just are not possible with hand tools. This corner notcher has a 9...
BAILEIGH SN-F11-AN
The SN-F11-AN pneumatic corner notcher from Baileigh Industrial is the great machine for making perfect corners in sheet metal. The SN-F11-AN corner notcher has an 11 gauge mild steel capacity, so...
BAILEIGH SN-F16-FN
Notching corners is a staple of any fabrication shop. Good clean notches are the difference between a great product and a not so great one. The SN-F16-FN sheet metal corner notcher is an economic...
BAILEIGH SN-F16-HN
The SN-F16-HN manual corner notcher is a high quality cast iron sheet metal notcher perfect for any garage or sheet metal shop. The cutting angle is fixed at 90 degrees and can notch up to 6" x 6" ...
BAILEIGH SN-V04-MS
Ever have odd angles that you need to notch out of sheet metal, something that will look totally whack when finished if not done right? Enter the SN-V04-MS; this great machine is a 220 volt three ...
BAILEIGH TN-125M
Sometimes that need for a reliable manual pipe notcher pops up when you least expect it. That is where the TN-125M from Baileigh Industrial comes in. This ninety degree pipe notcher can be bolted...
BAILEIGH TN-200E
Do you make 90 degree notches in schedule 40 pipe all day, every day? Then the TN-200E is for you. This electric tube notcher was specifically designed to notch schedule 40 pipe ranging in sizes ...
BAILEIGH TN-200M
The TN-200M is the monster of the Baileigh Industrial manual pipe notcher line. This manual pipe notcher has the ability to notch 1-1/2” and 2” schedule 40 pipe at 90 degrees. Like all Baileigh I...
BAILEIGH TN-210H
Are you looking to notch tubing economically? If so there is nothing better than a hole saw style tube notcher. The TN-210H is the perfect tube notching machine for the economical garage fabricat...
BAILEIGH TN-250
Ever have to notch tube in an awkward place, like say on a bend? Well good luck getting a tight clamp with the conventional tube notchers on the market. Baileigh Industrial took this challenge he...
BAILEIGH TN-300
The TN-300 pipe notcher from Baileigh Industrial is the best production hole saw notcher on the market today. This 110 volt notcher is built using only the best components. The idea of the TN-300...
BAILEIGH TN-400
Abrasive style belt notchers have been around for a long time and over that time many have tried, Baileigh Industrial included, coming up with something better. And while the newer machines did do...
BAILEIGH TN-50M
If you only need to notch small sizes of schedule 40 pipe, then the TN-50M manual pipe notcher is for you. The TN-50M might be small but it sure delivers enough punch to cope ¼”, 3/8”, and ½” sche...
BAILEIGH TN-600
If you are looking for a high quality top rated abrasive tube notcher made in the USA. Then look no further, the TN-600 from Baileigh Industrial is just what you are looking for. This abrasive tu...
BAILEIGH TN-800
If you are a shop that wants the best in tube and pipe equipment, then you have to look at the TN-800 tube and pipe notcher from Baileigh industrial. This patented (patent No: 6,435,783) design do...
CHICAGO DREIS & KRUMP HN-25
Chicago Dreis & Krump's productive, reliable, heavy duty, hydraulic notcher for all your notching needs. It will shear mild steel and stainless at high production speeds and it's a snap to operate....
DAKE DLN-6200
This corner Notcher has a 6mm or 4-gauge mild steel capacity, so it can make quick work of most any job. The DLN-6200 sheet metal corner Notcher machine has blades that are fixed at 90°, ensuring a...
DAKE DLN-6220V
This model hydraulic Notcher will cut notches from 30 to 140 degrees in mild steel and up to 6mm in thickness and will do this at a maximum rate of 15 strokes per minute. 24 Ton Capacity 4 Ga. Mild...
ERCOLINA EN100
Ercolina’s EN100 Pipe and Tube Notcher is ideal for hand railing, chassis and roll cages, fences and gates, furniture frames, marine rails and arches, tubing and plumbing for restaurant and dairy. ...
ERCOLINA EN180
HACO COMBI 220/6
The COMBI has a notching capacity of 6mm, a blade length of 220mm and has variable angle between 30 and 140 degrees. Several adjustable stops come standard with a second set of blades. A rectangul...
HACO MAXI 250/6
The MAXI series are fixed 90 degree with 6mm mild steel notching capacity. This MAXI can notch a 90 degree angle in 6mm mild steel with maximum length of 250mm. The MAXI model has a large working t...
HACO MINI 220/4
This MINI can notch a 90 degree angle in 4mm mild steel with maximum length of 220mm. The MINI has a large working table with 2 adjustable quick set stops and scales. The blade area is covered with...
HACO VARI 220 / 6
HACO VARI 220/6
The high precision VARI uses a specially designed system to adjust top and bottom blade simultaneously. This means that the VARI notcher has an adjustable notching angle between 30-140 degrees. Thi...
HECK WFN1
HECK WFN2
Pipe and Tubing Notchers We offer the fastest and easiest tools for fabrication of pipe and tubing notches. Creating 90° notches in the ends of tube for fence, railings, cages, and frames has never...
HECK WFN3
Pipe and Tubing Notchers We offer the fastest and easiest tools for fabrication of pipe and tubing notches. Creating 90° notches in the ends of tube for fence, railings, cages, and frames has never...
HECK WFN4
Pipe and Tubing Notchers We offer the fastest and easiest tools for fabrication of pipe and tubing notches. Creating 90° notches in the ends of tube for fence, railings, cages, and frames has never...
JET HN-16T
JET’s high quality cast iron sheet metal notcher is ideal or any garage or sheet metal shop. It's compact design makes it perfect for on-site use. The cutting angle is fixed at ninety degrees and c...
KIDDER 43B
Extra heavy duty notcher with capacity for 5" x 5" notch in 1/8" inch mild steel or 14 ga. stainless.The throat is 7" deep, permitting a full 5" x 5" corner notch. Comes with short or long handles ...
KIDDER 43BMP-S
This heavy duty hydraulically operated 5" x 5" notching machine can be used for shearing, squaring and trimming. Kidder's hydraulic system delivers smooth, safe power from 115VAC, under foot contro...
KIDDER 59H40
Cuts a full 7-1/2" x 7-1/2" notch in 1/8" steel or shears any length to 7" width. 14 gauge capacity in stainless. Will take a full corner notch. operation is hydraulic with jug type foot control. F...
KIDDER 68B
Long the industry standard, this popular 6" x 6" gauge Notch-Master comes equipped with reversible blades. This means that you can splay or pierce cut and adds coping to your capabilities. This mac...
KIDDER 70-S-H
Truly the finest power notcher ever made combining smooth hydraulic force, safe convenient foot control, precision and versatility. The offset head permits full 6" x 6" corner notching in 14 gauge ...
KIDDER 70S
Perhaps the finest shearing machine ever made. This 6" x 6" notcher has patented split head that adjust in seconds to any tap up to 1". Blades are reversible for either splay or piece cutting, perm...
SCOTCHMAN AL1
The AL1 can be used to notch 3/4", 1" and 1-1/4" Schedule 40 Pipe. This hand-operated machine can easily be wall mounted.
SCOTCHMAN AL2
The AL2 can be used to notch 1-1/2" and 2" Schedule 40 Pipe. This machine can easily be wall mounted.
SCOTCHMAN AL3
The AL3 can be used to notch 1-1/4" and 1-1/2" Schedule 40 Pipe. This machine can easily be wall mounted.
SCOTCHMAN ALU
The ALU can be used to notch a sink outflow in pipes with an external diameter of 1.0630" to 2.40158".
TENNSMITH 16-18
The heavy cast iron construction allows the notcher to be used to side shear six inches of material to its rated capacity; and the throat behind the upper ram is beveled on one side to permit long ...