DAKE SAR 331 SA
DAKE SE 5X6 RCT
This semi-automatic benchtop horizontal bandsaw is small in size but not in power. Featuring new reverse cutting technology for cooler cutting and faster, cleaner cuts. Designed for on-the-go appli...
DAKE SE 6.5 M
Mitering bandsaw with dual operating modes and hydraulic controlled down feed. 2.5HP, 120V motor with up to 60°right mitering capabilities. Ergonomic design for operator’s comfort and control. Vari...
DAKE SE-5X8
This benchtop horizontal bandsaw is small in size but not in power. Designed for on-the-go applications this saw will cut all of the metal rounds, flats, and tubes you need right in the field. Offe...
DAKE SE712
Standard Duty horizontal bandsaw offering accurate cutting, rugged gear box, hydraulic control, chip brush blade cleaner, and wet or dry cutting with simple operation.
HEM 260 BSA
The 260 is a double-mitering band saw cutting 45ᵒin both directions, up to 60ᵒ left miter, includes an adjustable hard-stop to cut multiple same-length parts, and has a built-in flood coolant syste...
HEM 782XLH
The 782XLH is a versatile benchtop band saw and will cut in the upright position with an optional “work table”, will miter up to 45ᵒ in one direction in the horizontal position, and includes a hard...
HEM ABS-105
The ABS-105 is a benchtop band saw with the ability to cut miters up to 45ᵒ in one direction in the horizontal position. A two-speed motor powers a ¼” blade and the saw operates in semi-automatic m...
HEM ABS-NG120XL
The ABS-NG120XL will cut in manual pull-down or semi-automatic modes and can miter-cut up 60ᵒ in one direction. The ¼” blade is powered by a 1.7 HP variable speed motor, and a hard-stop for cutting...
HEM ABS-NG160
The ABS-NG160 benchtop band saw will miter-cut up to 45ᵒ in one direction. It will cut with manual pull-down or semi-automatic modes. A ½” wide blade is powered by a 2.7 HP motor and a hard-stop is...
HEM N215XL
Utility Band Saw Capacity: 7.7″ W x 5″ H 6.6″ (Round) Miter: 5.9″ W x 4.3″ left @ 45° Miter: 3.9″ W x 2.9″ left @ 60° Blade: 7’0-1/4″ x .75″ x .035″ Operation: Manual
HEM NG120XL
The NG120XL band saw is our most popular benchtop model and miter-cuts up to 60ᵒ in one direction, is powered by a 1.7 HP variable speed motor, and includes a hard-stop for cutting multiple parts t...
HEM NG160
The NG160 benchtop band saw is powered by a 2.7 HP variable speed motor. It will cut miter angles up to 45ᵒ in one direction. The NG160 uses a ½” wide blade, is a manual pull-down saw, and includes...