1 - 50 of 73 Models
thumb

IOWA PRECISION AEMTM 3-16

Automatically produces 3” to 16” (75mm to 406mm) elbow blanks at a production rate up to 1,200 per hour. Processes mild steel up to 0.030” (0,76mm) in thickness and 24” (610mm) in width.

Elbow Machines
1 photo
thumb

IOWA PRECISION AEMTM 3-24

Automatically produces 3” to 24” (75mm to 310mm) elbow blanks at a production rate up to 3,150 per hour. Processes mild steel up to 0.030” (0,76mm) in thickness and 32” (813mm) in width.

Elbow Machines
1 photo
thumb

IOWA PRECISION AEMTM-HS 3-24

The Tube-Matic elbow blanking line provides highly accurate punched, crimped, beaded and rolled blanks ready for processing and is an ideal companion line for the Iowa Precision Adjustable Elbow Ma...

Elbow Machines
1 photo
thumb

IOWA PRECISION AUTOMATED FURNACE PIPE SYSTEMS

Save time and money by rolling your own pipe. Iowa Precision’s advanced system produces oval or 3" to 14" diameter round pipe from 2’ to 10’ in length out of 24 to 30 gauge galvanized steel with th...

Roll Formers
1 photo
thumb

IOWA PRECISION AUTOMATED ROLLING

Iowa Precision’s advanced system produces oval or 3” to 14” diameter round pipe from 2’ to 10’ in length out of 24 to 30 gauge galvanized steel with the turn of a dial. Just feed blank material in...

Pipe Mills
1 photo
thumb

IOWA PRECISION CM-47-2

Automated Collar Production and Collar / Boot Assembly Iowa Precision’s Collar-Matic Line takes the handwork out of collar production for collar/boot assemblies. The system uses convenient 2-1/8"...

Coil End Joiners
1 photo
Brochure
thumb

IOWA PRECISION CM-58-3

Iowa Precision’s Collar-Matic Line takes the handwork out of collar production for collar/boot assemblies. The system uses convenient 2-1/8" drive cleat coil stock, .013" to .015" thick, to form he...

Coil End Joiners
1 photo
Brochure
thumb

IOWA PRECISION CM-C-DH

Cornermatic® automatically inserts and crimps specially designed TDC/TDF® style corners in seconds. Lets you do a duct section, eight corners, in about 60 seconds with virtually no physical exertio...

Corner Formers
1 photo
thumb

IOWA PRECISION CM-F-DH

Cornermatic® automatically inserts and crimps specially designed TDC/TDF® style corners in seconds. Lets you do a duct section, eight corners, in about 60 seconds with virtually no physical exertio...

Corner Formers
1 photo
Video
thumb

IOWA PRECISION COLATACH C

This field-proven multi-functional machine forms a bead for the collaring operation in producing boots and other furnace fittings.

Trimming, Beading & Flanging Machines
1 photo
thumb

IOWA PRECISION COLATCH B

This field-proven multi-functional machine forms a bead for the collaring operation in producing boots and other furnace fittings.

Trimming, Beading & Flanging Machines
1 photo
thumb

IOWA PRECISION COLATECH D

This field-proven multi-functional machine forms a bead for the collaring operation in producing boots and other furnace fittings.

Trimming, Beading & Flanging Machines
1 photo
thumb

IOWA PRECISION CORNERMATIC

Cornermatic® automatically inserts and crimps specially designed TDC/TDF® style corners in seconds. Lets you do a duct section, eight corners, in about 60 seconds with virtually no physical exertio...

Corner Formers
1 photo
thumb

IOWA PRECISION CORNERMATIC PLUS

The CORNERMATIC+PLUS was specifically designed to address the difficulty with inserting corners into fitting ductwork. It joins other world-wide successful Cornermatics such as the Dual-Head and t...

Corner Formers
1 photo
thumb

IOWA PRECISION DUAL HEAD CORNERMATIC

Handles duct up to 60"

Corner Formers
1 photo
thumb

IOWA PRECISION ELBOW

Elbow Machines
1 photo
Brochure
thumb

IOWA PRECISION EMHP 3/4/5

Adding to our line of machines is the Automatic Elbow Machine. This precision machine produces high quality straight, articulated elbows from tube blanks, which can be hand turned to any angle betw...

Elbow Machines
1 photo
thumb

IOWA PRECISION EMHP 4/5/6

Adding to our line of machines is the Automatic Elbow Machine. This precision machine produces high quality straight, articulated elbows from tube blanks, which can be hand turned to any angle betw...

Elbow Machines
1 photo
thumb

IOWA PRECISION EMHP 6/7/8

Adding to our line of machines is the Automatic Elbow Machine. This precision machine produces high quality straight, articulated elbows from tube blanks, which can be hand turned to any angle betw...

Elbow Machines
1 photo
thumb

IOWA PRECISION IM5-SK

Insulmatic Swing Knife Cut-Off System - Model IM5-SK To complete the INSULMATIC, the new patented SWING KNIFE CUT-OFF can be used to cut both the conformable non-fibrous foam insulation and standa...

Foam Cutting Machines
1 photo
Video
Brochure
thumb

IOWA PRECISION PCF6016

This machine is designed to feed a plasma cutting table. It is comprised of a drive motor and a series of rolls to feed and remove coil set from the material. The operator uses an on/off switch at...

Coil Feed Lines
1 photo
Video
Brochure
thumb

IOWA PRECISION PLASMA COIL FEED

This machine is designed to feed a plasma cutting table. It is comprised of a drive motor and a series of rolls to feed and remove coil set from the material. The operator uses an on/off switch at...

Coil Feed Lines
1 photo
thumb

IOWA PRECISION PRO-DUCTOMATIC

Request A Quote Every Pro-Ductomatic Front-End Coil Line System has been designed to maximize your return on investment by delivering years of reliable production. Designed for Light to Heavy Dut...

Coil Feed Lines
1 photo
Video
thumb

IOWA PRECISION PRO-FABRIDUCT

Truly the most Advanced Complete Coil Line produced in the industry today. Leverages footprint, speed and production rates along with tolerances NO other HVAC coil line can match!

Coil Feed Lines
1 photo
Video
Brochure
thumb

IOWA PRECISION TDC-FAM

HVAC contractors involved in new commercial building construction have to address far more air quality and system contamination concerns than in the past. SMACNA Duct Cleanliness § 3.4.1(b) guidel...

Air Cleaners
1 photo
thumb

IOWA PRECISION TIE ROD TRC-H

At Iowa Precision, no detail is too small when it comes to improving your productivity and profitability. Our Tie Rod Crimper* is a great example. Whether you use 1/2", 3/4" or 1" EMT, keeping HVA...

Crimpers
1 photo
thumb

IOWA PRECISION WHISPERLOC PRO-XVI

The PRO-XVI is equipped with push button motor controls for quick-change duct lengths and is chain driven!

Corner Formers
1 photo
Brochure
thumb

LOCKFORMER 20 GAUGE BUTTON PUNCH SNAPLOCK

The Button Punch Snap Lock Machines form a two piece seam that greatly simplifies ductwork assembly. The male seam is a button, the female seam is a lock and the two snap together for a flush corne...

Roll Formers
1 photo
thumb

LOCKFORMER 6016

Beading is a cost-conscious way to stiffen ductwork. It is 5 times faster than the old method, cross-braking, and uses only one operator. Designed to meet the requirements of SMACNA, this ductwork ...

Trimming, Beading & Flanging Machines
1 photo
thumb

LOCKFORMER AUTO-GUIDE FLANGER 16

These ductwork prep machines automatically follow any edge – curved or straight. Use the convenient table slot to turn up a "starting flange" and let it go! A calibrated dial can be set for radii a...

Flangers
1 photo
thumb

LOCKFORMER BUTTON PUNCH 20

The Button Punch Snap Lock Machines form a two piece seam that greatly simplifies ductwork assembly. The male seam is a button, the female seam is a lock and the two snap together for a flush corne...

Roll Formers
1 photo
thumb

LOCKFORMER BUTTON PUNCH 24

The Button Punch Snap Lock Machines form a two piece seam that greatly simplifies ductwork assembly. The male seam is a button, the female seam is a lock and the two snap together for a flush corne...

Roll Formers
1 photo
thumb

LOCKFORMER BUTTON PUNCH CHEEK

This machine provides any shop with a complete work center for fabricating fittings. One side of the dual purpose bending die bends and punches the cheeks for Button Punch Snap Lock 90-degree fitti...

Benders, Hand
1 photo
thumb

LOCKFORMER BUTTON PUNCH SNAP-LOCK

Roll single-direction curves down to a minimum radius of 3-1/2” inside or a 5” outside radius, almost automatically. These punched right-angle flanged curves fit perfectly in the receiver formed on...

Flangers
1 photo
thumb

LOCKFORMER COLLARMAKER

Notch, bead, crimp & roll in one pass! Save time and money by combining notching, beading, crimping and rolling in one operation. For complete round starting collars 3 to 14 inches in diameter ou...

Crimpers
1 photo
thumb

LOCKFORMER CORNER CADET

Fast easy corner insertion and crimping in ducts and fittings. Although the Corner Cadet® is portable and light in weight, it’s heavy on performance, automatically inserting and crimping specially ...

Corner Formers
1 photo
Video
thumb

LOCKFORMER DRIVE TURN HEMMING

The Lockformer® Skip Dent Indexing Roll is the heart of the system. The indexer is the first roll and has four pins and two milled ridges. The control lever determines whether the blank is hemmed a...

Roll Formers
1 photo
thumb

LOCKFORMER DS CONNECTOR 14STA

This Lockformer® 14-Station Connector Machine is for the contractor who has need for only one duct connector profile inboard but wants the flexibility of two outboard auxiliary forming stations. I...

Roll Formers
1 photo
thumb

LOCKFORMER EASY EDGER

Turn perfect flanges on elbows or other curved fittings as fast as you can notch them. No gauge to set. Hand clamps to my bench. 20 gauge maximum.

Flangers
1 photo
thumb

LOCKFORMER OVAL/ROUND PIPE 7STATION

Available in either 7-station or 9-station (for pre-curl) machines which fabricate both male and female forms for Reeves-type snap lock. Each lock is formed on flat sheets with no restrictions on t...

Roll Formers
1 photo
thumb

LOCKFORMER OVAL/ROUND PIPE 9STATION

Available in either 7-station or 9-station (for pre-curl) machines which fabricate both male and female forms for Reeves-type snap lock. Each lock is formed on flat sheets with no restrictions on t...

Roll Formers
1 photo
thumb

LOCKFORMER PITTSBURGH 20GA

The 20 gauge Pittsburgh rollforming machines have 5 forming stations with 2 forming positions. One inboard forming position forms the Pittsburgh lock and one auxiliary or outboard forming position ...

Roll Formers
1 photo
thumb

LOCKFORMER PITTSBURGH 24GA

The 24 gauge Pittsburgh rollforming machine has 5 forming stations and 1 inboard forming position. The forming chassis is constructed of 1/2" steel plate. This machine is compact and lightweight an...

Roll Formers
1 photo
thumb

LOCKFORMER PITTSBURGH LOCK 14

The 14, 16 and 18 gauge Pittsburgh rollforming machines have 7 forming stations with two forming positions. One inboard position forms the Pittsburgh lock; and one auxiliary or outboard position ha...

Roll Formers
1 photo
Video
thumb

LOCKFORMER PITTSBURGH LOCK 16

The 14, 16 and 18 gauge Pittsburgh rollforming machines have 7 forming stations with two forming positions. One inboard position forms the Pittsburgh lock; and one auxiliary or outboard position ha...

Roll Formers
1 photo
Video
thumb

LOCKFORMER PITTSBURGH LOCK 18

The 14, 16 and 18 gauge Pittsburgh rollforming machines have 7 forming stations with two forming positions. One inboard position forms the Pittsburgh lock; and one auxiliary or outboard position ha...

Roll Formers
1 photo
thumb

LOCKFORMER PITTSBURGH LOCK 20

The Pittsburgh Lock revolutionized the HVAC Industry in the late 1940’s and is still used today for its strength and ease in assembling ductwork. The Super Speed 20 and Model 20 Pittsburgh rollfor...

Roll Formers
1 photo
thumb

LOCKFORMER PITTSBURGH LOCK 20 SUPER SPEED

The Pittsburgh Lock revolutionized the HVAC Industry in the late 1940’s and is still used today for its strength and ease in assembling ductwork. The Super Speed 20 and Model 20 Pittsburgh rollfor...

Roll Formers
1 photo