IOWA PRECISION TDC-FAM
HVAC contractors involved in new commercial building construction have to address far more air quality and system contamination concerns than in the past. SMACNA Duct Cleanliness § 3.4.1(b) guidel...
IOWA PRECISION CB-30
LOCKFORMER BUTTON PUNCH CHEEK
This machine provides any shop with a complete work center for fabricating fittings. One side of the dual purpose bending die bends and punches the cheeks for Button Punch Snap Lock 90-degree fitti...
ROTO-DIE 15
120" x 14 gauge (Mild Steel) 120" x 16 gauge* (Stainless Steel) 120" x 10 gauge*
IOWA PRECISION CM-47-2
Automated Collar Production and Collar / Boot Assembly Iowa Precision’s Collar-Matic Line takes the handwork out of collar production for collar/boot assemblies. The system uses convenient 2-1/8"...
IOWA PRECISION CM-58-3
Iowa Precision’s Collar-Matic Line takes the handwork out of collar production for collar/boot assemblies. The system uses convenient 2-1/8" drive cleat coil stock, .013" to .015" thick, to form he...
IOWA PRECISION PRO-FABRIDUCT
Truly the most Advanced Complete Coil Line produced in the industry today. Leverages footprint, speed and production rates along with tolerances NO other HVAC coil line can match!
IOWA PRECISION PCF6016
This machine is designed to feed a plasma cutting table. It is comprised of a drive motor and a series of rolls to feed and remove coil set from the material. The operator uses an on/off switch at...
IOWA PRECISION PRO-DUCTOMATIC
Request A Quote Every Pro-Ductomatic Front-End Coil Line System has been designed to maximize your return on investment by delivering years of reliable production. Designed for Light to Heavy Dut...
IOWA PRECISION PLASMA COIL FEED
This machine is designed to feed a plasma cutting table. It is comprised of a drive motor and a series of rolls to feed and remove coil set from the material. The operator uses an on/off switch at...
IOWA PRECISION CM-C-DH
Cornermatic® automatically inserts and crimps specially designed TDC/TDF® style corners in seconds. Lets you do a duct section, eight corners, in about 60 seconds with virtually no physical exertio...
LOCKFORMER CORNER CADET
Fast easy corner insertion and crimping in ducts and fittings. Although the Corner Cadet® is portable and light in weight, it’s heavy on performance, automatically inserting and crimping specially ...
IOWA PRECISION CORNERMATIC PLUS
The CORNERMATIC+PLUS was specifically designed to address the difficulty with inserting corners into fitting ductwork. It joins other world-wide successful Cornermatics such as the Dual-Head and t...
IOWA PRECISION WHISPERLOC PRO-XVI
The PRO-XVI is equipped with push button motor controls for quick-change duct lengths and is chain driven!
IOWA PRECISION CORNERMATIC
Cornermatic® automatically inserts and crimps specially designed TDC/TDF® style corners in seconds. Lets you do a duct section, eight corners, in about 60 seconds with virtually no physical exertio...
IOWA PRECISION CM-F-DH
Cornermatic® automatically inserts and crimps specially designed TDC/TDF® style corners in seconds. Lets you do a duct section, eight corners, in about 60 seconds with virtually no physical exertio...
IOWA PRECISION TIE ROD TRC-H
At Iowa Precision, no detail is too small when it comes to improving your productivity and profitability. Our Tie Rod Crimper* is a great example. Whether you use 1/2", 3/4" or 1" EMT, keeping HVA...
LOCKFORMER 512
LOCKFORMER COLLARMAKER
Notch, bead, crimp & roll in one pass! Save time and money by combining notching, beading, crimping and rolling in one operation. For complete round starting collars 3 to 14 inches in diameter ou...
IOWA PRECISION EMHP 3/4/5
Adding to our line of machines is the Automatic Elbow Machine. This precision machine produces high quality straight, articulated elbows from tube blanks, which can be hand turned to any angle betw...
IOWA PRECISION AEMTM 3-16
Automatically produces 3” to 16” (75mm to 406mm) elbow blanks at a production rate up to 1,200 per hour. Processes mild steel up to 0.030” (0,76mm) in thickness and 24” (610mm) in width.
IOWA PRECISION AEMTM 3-24
Automatically produces 3” to 24” (75mm to 310mm) elbow blanks at a production rate up to 3,150 per hour. Processes mild steel up to 0.030” (0,76mm) in thickness and 32” (813mm) in width.
IOWA PRECISION EMHP 4/5/6
Adding to our line of machines is the Automatic Elbow Machine. This precision machine produces high quality straight, articulated elbows from tube blanks, which can be hand turned to any angle betw...
IOWA PRECISION EMHP 6/7/8
Adding to our line of machines is the Automatic Elbow Machine. This precision machine produces high quality straight, articulated elbows from tube blanks, which can be hand turned to any angle betw...
IOWA PRECISION AEMTM-HS 3-24
The Tube-Matic elbow blanking line provides highly accurate punched, crimped, beaded and rolled blanks ready for processing and is an ideal companion line for the Iowa Precision Adjustable Elbow Ma...
IOWA PRECISION ELBOW
LOCKFORMER EASY EDGER
Turn perfect flanges on elbows or other curved fittings as fast as you can notch them. No gauge to set. Hand clamps to my bench. 20 gauge maximum.
LOCKFORMER AUTO-GUIDE FLANGER 16
These ductwork prep machines automatically follow any edge – curved or straight. Use the convenient table slot to turn up a "starting flange" and let it go! A calibrated dial can be set for radii a...
LOCKFORMER BUTTON PUNCH SNAP-LOCK
Roll single-direction curves down to a minimum radius of 3-1/2” inside or a 5” outside radius, almost automatically. These punched right-angle flanged curves fit perfectly in the receiver formed on...
LOCKFORMER VULCAN 1500 KNIFEJET
Your cutting table drives your business. Trust Lockformers Vulcan to drive your table. Manual cutting duct liner is wasteful. This system cuts costs by reducing insulation scrap and you know fiber...
IOWA PRECISION IM5-SK
Insulmatic Swing Knife Cut-Off System - Model IM5-SK To complete the INSULMATIC, the new patented SWING KNIFE CUT-OFF can be used to cut both the conformable non-fibrous foam insulation and standa...
LOCKFORMER ROTO NOTCHER
Dove-tail notch out of 24 to 30 gauge galvanized — in only one pass! Just cut to width and length or use scrap. This machine uses either 3" or 6" width blanks with simple adjustment.
LOCKFORMER SPEEDNOTCH 16
Speednotch allows you to gang-notch sheet metal hydraulically up to 600% faster than by hand, without layout or scribing. It’s the perfect tool for preparing ductwork to receive bar, slip or “S” a...
LOCKFORMER TDC NOTCHER
TDC NOTCHER comes standard with 5 notching heads. The Lockformer TDC NOTCHER will gang notch duct blanks as much as 6 times faster than notching by hand. The Hydraulic powered notch units have in...
IOWA PRECISION AUTOMATED ROLLING
Iowa Precision’s advanced system produces oval or 3” to 14” diameter round pipe from 2’ to 10’ in length out of 24 to 30 gauge galvanized steel with the turn of a dial. Just feed blank material in...
LOCKFORMER VULCANPLUS
Simply the best…..Worldwide. The Plus is the benchmark in plasma cutting systems - now featuring the new “Flex-Ability” technology. A superior product brand because it has earned the reputation fo...
LOCKFORMER VULCAN 3100
Lockformer is recognized as one of the leading suppliers of quality metal forming equipment around the world. Our commitment in designing and building practical, cost-efficient equipment has endure...
LOCKFORMER VULCAN 2900
Lockformer’s commitment in designing and building practical, cost-efficient equipment has endured for over 75 years. Our customers have come to depend on the Lockformer name for dependability. Ren...
LOCKFORMER PITTSBURGH LOCK 20 SUPER SPEED
The Pittsburgh Lock revolutionized the HVAC Industry in the late 1940’s and is still used today for its strength and ease in assembling ductwork. The Super Speed 20 and Model 20 Pittsburgh rollfor...
LOCKFORMER SUPER 11 CLEATFORMER
When the job calls for heavy-duty “giants,” this machine tool is it. For a multitude of HVAC rollforming shapes and profiles, look no further than the Super 11 Cleatformer. Pittsburgh Lock, Acme/D...
LOCKFORMER PITTSBURGH LOCK 20
The Pittsburgh Lock revolutionized the HVAC Industry in the late 1940’s and is still used today for its strength and ease in assembling ductwork. The Super Speed 20 and Model 20 Pittsburgh rollfor...
LOCKFORMER PITTSBURGH LOCK 24
The 24 gauge Pittsburgh rollforming machine has 5 forming stations and 1 inboard forming position. The forming chassis is constructed of 1/2" steel plate. This machine is compact and lightweight an...
LOCKFORMER SPIN COLLAR MAKER #12
Just cut galvanized stock (24 gauge & lighter) to width and length, set the diameter from 4" to 16", and push the blank against the automatic stop. A synchronized die notches the lead edge for easy...
LOCKFORMER OVAL/ROUND PIPE 9STATION
Available in either 7-station or 9-station (for pre-curl) machines which fabricate both male and female forms for Reeves-type snap lock. Each lock is formed on flat sheets with no restrictions on t...
LOCKFORMER OVAL/ROUND PIPE 7STATION
Available in either 7-station or 9-station (for pre-curl) machines which fabricate both male and female forms for Reeves-type snap lock. Each lock is formed on flat sheets with no restrictions on t...
LOCKFORMER TDC 14 STATION - 2 PLATE
Rollforming your own sealable flanges on transverse duct ends during the manufacturing process has never been easier. The TDC flange, formed on the machine’s left-hand auxiliary, has unique, snap-o...