DAKE DLN-6200
This corner Notcher has a 6mm or 4-gauge mild steel capacity, so it can make quick work of most any job. The DLN-6200 sheet metal corner Notcher machine has blades that are fixed at 90°, ensuring a...
DAKE DLN-6220V
This model hydraulic Notcher will cut notches from 30 to 140 degrees in mild steel and up to 6mm in thickness and will do this at a maximum rate of 15 strokes per minute. 24 Ton Capacity 4 Ga. Mild...
SCOTCHMAN AL1
The AL1 can be used to notch 3/4", 1" and 1-1/4" Schedule 40 Pipe. This hand-operated machine can easily be wall mounted.
SCOTCHMAN AL2
The AL2 can be used to notch 1-1/2" and 2" Schedule 40 Pipe. This machine can easily be wall mounted.
SCOTCHMAN AL3
The AL3 can be used to notch 1-1/4" and 1-1/2" Schedule 40 Pipe. This machine can easily be wall mounted.
SCOTCHMAN ALU
The ALU can be used to notch a sink outflow in pipes with an external diameter of 1.0630" to 2.40158".
TENNSMITH 16-18
The heavy cast iron construction allows the notcher to be used to side shear six inches of material to its rated capacity; and the throat behind the upper ram is beveled on one side to permit long ...