ACRA BS 250AS
ACRA BS 250V
ACRA BS 250VS
ACRA BS 330 SSA
ACRA BS HL-270A
ACRA BS-250A
ACRA BS-330
ACRA BS-814
ACRA UE-712
ACRA UE-916A
DOALL 400A
400A features automatic indexing, pneumatic head lift and hydraulic feed control. Band tensioning is easily set by handwheel to 30,000 psi for more accurate cutting. Standard infinitely variable ba...
DOALL 400M
The 400M general purpose band saw is one of DoALL's introductory machines in the NEW StructurALL family of saws. It’s the ideal machine for the small to medium fabricator or machine shop, looking ...
DOALL 400S
The 400S general purpose band saw is DoALL's introductory machine in the NEW StructurALL family of saws. Swiveling 45 degrees, it’s the ideal machine for the small to medium fabricator or machine ...
DOALL 500DS
The 500DS is a fully hydraulic (clamping and head-lift) part of DoALL's NEW StructurALL family of band saws. The 500DS features a 14" x 20" capacity of rectangles and 15" rounds, at 0°. With a dou...
DOALL 500S
The affordable 500-S saw will increase flexibility and improve efficiency in any general purpose sawing application.
DOALL 500SNC
Part of the new StructurALL® family of machines, the DoALL 500-SNC horizontal metal cutting band saw is an affordable Numeric Controlled (NC) angle cutting saw that will increase flexibility and pr...
DOALL 800SNC
Part of the new StructurALL family of machines, the 800-SNC is an affordable NC controlled angle cutting saw that increases flexibility and provides greater efficiency for general purpose sawing. T...
DOALL C-650M
These saws feature a full 26” (660 mm) cutting capacity and are available in 3 models with manual or automatic numerical control and a stationary or swivel base for production sawing of all materia...
DOALL C-650NC
These saws feature a full 26” (660 mm) cutting capacity and are available in 3 models with manual or automatic numerical control and a stationary or swivel base for production sawing of all materia...
DOALL DC-280NC
These saws are designed for cutting a wide range of metals on a production basis. They offer automatic operation and numerical control, feature solid, heavy-duty construction. This provides more ri...
DOALL DC-280SA
The DC-280SA Semi-Automatic Continental Series™ high production, horizontal band saws by DoALL are designed for cutting a wide range of metals on a production basis. While DoALL semi-automatic saws...
DOALL DC-330NC
The DC-330NC Continental Series™ of high production, horizontal band saws by DoALL are designed for cutting a wide range of metals on a production basis. They offer automatic operation, numerical c...
DOALL DC-330SA
The DC-330SA Semi-Automatic Continental Series™ of high production, horizontal band saws by DoALL are designed for cutting a wide range of metals on a production basis. While DoALL semi-automatic s...
DOALL DC-420NC
The DC-420NC Continental Series™ high production, horizontal band saws by DoALL are designed for cutting a wide range of metals on a production basis. They offer automatic operation, numerical cont...
DOALL DC-460NC
The DC-460NC Continental Series™ of high production, horizontal band saws by DoALL are designed for cutting a wide range of metals on a production basis. They offer automatic operation, numerical c...
DOALL DC-500SA
The DC-500SA Semi-Automatic Continental Series™ of high production, horizontal band saws by DoALL are designed for cutting a wide range of metals on a production basis. While DoALL semi-automatic s...
DOALL DC-560NC
The DC-560NC Continental Series™ high production, horizontal band saws by DoALL are designed for cutting a wide range of metals on a production basis. They offer automatic operation, numerical cont...
DOALL DC-560SA
The DC-560SA Semi-Automatic Continental Series™ of high production, horizontal band saws by DoALL are designed for cutting a wide range of metals on a production basis. While DoALL semi-automatic s...
DOALL DC-700NC
The DC-700NC Continental Series™ high production, horizontal band saws by DoALL are designed for cutting a wide range of metals on a production basis. The DC-700NC offers automatic operation, numer...
DOALL DC-800NC
The DC-800NC Continental Series™ high production horizontal band saws by DoALL are designed for cutting a wide range of metals on a production basis. The DC-800NC offers automatic operation, numeri...
DOALL DC-800SA
The DC-800SA Semi-Automatic Continental Series™ high production, horizontal band saws by DoALL are designed for cutting a wide range of metals on a production basis. While DoALL semi-automatic saws...
DOALL DS-320M
The DoALL DS-320M StructurALL® manual swivel, dual-miter metal cutting band saw is a cost-effective solution for low production environments. The DS-320M horizontal band saw from DoALL is designed ...
DOALL DS-320SA
The DoALL DS-320SA StructurALL® semi-automatic, dual-miter band saw is designed for cutting vertical and angular material for low volume piece production. The DS-320SA dual-swivel ability allows mi...
DOALL DS-500SA
The DoALL DS-500SA StructurALL® semi-automatic, dual-miter metal-cutting band saw is designed for cutting material both linear and at angles. Miter angle cuts are possible up to 60° left and right....
DOALL DS-600SA
The DoALL DS-600SA StructurALL® semi-automatic, dual-miter metal-cutting band saw is designed for cutting material both linear and at angles. Miter angle cuts are possible up to 60° left and right....
DOALL S-320CNC
The DoALL S-320CNC StructurALL® miter, CNC automatic, metal-cutting band saw is ideal for fabricating shops, maintenance facilities, tool and manufacturing plants. The S-320CNC can also be classifi...
HEM 260 BSA
The 260 is a double-mitering band saw cutting 45ᵒin both directions, up to 60ᵒ left miter, includes an adjustable hard-stop to cut multiple same-length parts, and has a built-in flood coolant syste...
HEM 320 BSA
The 320 BSA is a double-mitering band saw cutting 45ᵒin both directions, up to 60ᵒ left miter. The control is connected by a 40” umbilical cord and blade speed adjusts approximately 39 to 320 SFPM....
HEM 782XLH
The 782XLH is a versatile benchtop band saw and will cut in the upright position with an optional “work table”, will miter up to 45ᵒ in one direction in the horizontal position, and includes a hard...
HEM ABS-105
The ABS-105 is a benchtop band saw with the ability to cut miters up to 45ᵒ in one direction in the horizontal position. A two-speed motor powers a ¼” blade and the saw operates in semi-automatic m...
HEM ABS-NG120XL
The ABS-NG120XL will cut in manual pull-down or semi-automatic modes and can miter-cut up 60ᵒ in one direction. The ¼” blade is powered by a 1.7 HP variable speed motor, and a hard-stop for cutting...
HEM ABS-NG160
The ABS-NG160 benchtop band saw will miter-cut up to 45ᵒ in one direction. It will cut with manual pull-down or semi-automatic modes. A ½” wide blade is powered by a 2.7 HP motor and a hard-stop is...
HEM CYCLONE A-4
The Cyclone A-4 makes cutting 45ᵒ miter cuts in one direction perfect for cutting small solids and shapes. With a 24” indexing bar-feed and up to 4 indexes, cutting multiple parts in longer than 24...
HEM CYCLONE A-C
Product Description The Cyclone A-C multiple indexes with a 24” bar-feed, saves up to 99 jobs, sawing one job or multiple jobs of differing lengths and quantities in sequence. Each job includes job...
HEM CYCLONE M
Product Description The Cyclone M miters to 60ᵒ one direction, is ideal for cutting solids and structural shapes with a 1¼” blade and 7½ HP motor. The control console, mounted on a swing arm, allow...
HEM H105A-4
The H105A-4 model includes a 7½ HP motor and a 1¼” blade with a 24” stroke bar-feed that will index up to 4 times cutting up to 999 parts of the same length. This scissor style saw is perfect for c...
HEM H105A-C
The H105A-C includes a 24” bar-feed and allows multiple indexes and the ability to create and save up to 99 jobs. Each job includes a job number, the part length, and quantity and runs consecutive ...
HEM H105LA-4
Horizontal Pivot Band Saw Capacity: 20″ W x 16″ H Bar-feed: 0-24″ (4 Indexes) Blade: 15’8″ x 1.25″ x .042″ Motor: 7.5 HP Operation: Automatic
HEM H105LA-C
Horizontal Pivot Band Saw Capacity: 20″ W x 16″ H Bar-feed: 0-24″ (Multiple Index) Blade: 15’8″ x 1.25″ x .042″ Motor: 7.5 HP Operation: Automatic